求助: 关于spinner bait 连接处

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

求助: 关于spinner bait 连接处

楼层:#1  帖子Young » 15 7月 2017 22:08

基本上spinner bait连接处都是开口的吧? 要是用快速换饵的扣,因为是开口的 所以总会乱窜,请问大家是怎么解决的?

我现在都是直接用线绑住spinner bait, 但是要换饵就比较麻烦。又不是壕 没法一次带好几根杆儿。。。。。
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
Young
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2245
注册: 30 8月 2015 19:07
Member Number (论坛会员注册序列号): #1280
地址: Vellore, Vaughan
称呼: Young

Re: 求助: 关于spinner bait 连接处

楼层:#2  帖子Sergeantpepper » 15 7月 2017 22:34

stuka850622 @ Sat Jul 15, 2017 10:08 pm 写道: 基本上spinner bait连接处都是开口的吧? 要是用快速换饵的扣,因为是开口的 所以总会乱窜,请问大家是怎么解决的?

我现在都是直接用线绑住spinner bait, 但是要换饵就比较麻烦。又不是壕 没法一次带好几根杆儿。。。。。


ask for o-ring for the job from local tackle shops, or use clear pvc tubing from float lights
some used to wrap that R up using steel wire :redfaced....use 20Ga wire with cut ends concealed after wrapping
最后由 Sergeantpepper 编辑于 15 7月 2017 22:48,总共编辑了 1 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 求助: 关于spinner bait 连接处

楼层:#3  帖子wetnose » 15 7月 2017 22:38

Sergeantpepper @ Sat Jul 15, 2017 10:34 pm 写道:
stuka850622 @ Sat Jul 15, 2017 10:08 pm 写道: 基本上spinner bait连接处都是开口的吧? 要是用快速换饵的扣,因为是开口的 所以总会乱窜,请问大家是怎么解决的?

我现在都是直接用线绑住spinner bait, 但是要换饵就比较麻烦。又不是壕 没法一次带好几根杆儿。。。。。


ask for o-ring for the job from local tackle shops, or use clear pvc tubing from float lights
some used to wrap that R up using steel wire :redfaced

:+1 :shake
$_27.JPG
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: 求助: 关于spinner bait 连接处

楼层:#4  帖子Sergeantpepper » 15 7月 2017 23:01

some SB comes with closed R

图片

图片
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
最后由 Sergeantpepper 编辑于 16 7月 2017 16:32,总共编辑了 2 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 求助: 关于spinner bait 连接处

楼层:#5  帖子madfrog » 15 7月 2017 23:03

tie direct to your spinnerbait,using a snap will take away 50% of the vibration,silicone tube too

Tie double line knot, knot will hold in place much better
madfrog
General (上将)
General (上将)
 
帖子: 7880
注册: 02 4月 2014 10:47
Member Number (论坛会员注册序列号): #347
地址: rutherford & weston

Re: 求助: 关于spinner bait 连接处

楼层:#6  帖子Sergeantpepper » 15 7月 2017 23:19

madfrog @ Sat Jul 15, 2017 11:03 pm 写道: tie direct to your spinnerbait,using a snap will take away 50% of the vibration,silicone tube too

Tie double line knot, knot will hold in place much better


50% reduction that much ?.... just thought 40% only :roflmao
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 求助: 关于spinner bait 连接处

楼层:#7  帖子madfrog » 15 7月 2017 23:46

Sergeantpepper @ 周六 7月 15, 2017 11:19 pm 写道:
madfrog @ Sat Jul 15, 2017 11:03 pm 写道: tie direct to your spinnerbait,using a snap will take away 50% of the vibration,silicone tube too

Tie double line knot, knot will hold in place much better


50% reduction that much ?.... just thought 40% only :roflmao


Well it also depends on the actual model of spinnerbaits used. I got some serious spinnerbaits, vibrate like chatterbaits. You put a snap on, it removes almost 80% vib. Vibration is the key when fished in shallow weed, the flash factor is overwhelmed due to limited depth
madfrog
General (上将)
General (上将)
 
帖子: 7880
注册: 02 4月 2014 10:47
Member Number (论坛会员注册序列号): #347
地址: rutherford & weston

Re: 求助: 关于spinner bait 连接处

楼层:#8  帖子白雪丹枫 » 16 7月 2017 05:33

打个结也就一分钟,有必要加个快速接头吗? :redfaced
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14863
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: 求助: 关于spinner bait 连接处

楼层:#9  帖子Sergeantpepper » 16 7月 2017 09:00

这主题是有关如何處理R开囗會滑線的问题, 应否使用snap swivel 要另题討論..
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 求助: 关于spinner bait 连接处

楼层:#10  帖子aberdeen » 16 7月 2017 10:43

Use small o ring,sell at tackle shop
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
aberdeen
Brigadier General (大校/准将)
Brigadier General (大校/准将)
 
帖子: 417
注册: 24 1月 2015 19:28
Member Number (论坛会员注册序列号): #931

Re: 求助: 关于spinner bait 连接处

楼层:#11  帖子madfrog » 16 7月 2017 11:30

Sergeantpepper @ 周日 7月 16, 2017 9:00 am 写道: 这主题是有关如何處理R开囗會滑線的问题, 应否使用snap swivel 要另题討論..


我的point就是不用snap就不涉及到滑线了,problem sovled :laugh3
madfrog
General (上将)
General (上将)
 
帖子: 7880
注册: 02 4月 2014 10:47
Member Number (论坛会员注册序列号): #347
地址: rutherford & weston

Re: 求助: 关于spinner bait 连接处

楼层:#12  帖子Sergeantpepper » 16 7月 2017 11:37

madfrog @ Sun Jul 16, 2017 11:30 am 写道:
Sergeantpepper @ 周日 7月 16, 2017 9:00 am 写道: 这主题是有关如何處理R开囗會滑線的问题, 应否使用snap swivel 要另题討論..


我的point就是不用snap就不涉及到滑线了,problem sovled :laugh3


我求教如何把餃子包好, 你叫我改吃麵..... :laugh3
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 求助: 关于spinner bait 连接处

楼层:#13  帖子wetnose » 16 7月 2017 11:37

madfrog @ Sat Jul 15, 2017 11:46 pm 写道:
Sergeantpepper @ 周六 7月 15, 2017 11:19 pm 写道:
madfrog @ Sat Jul 15, 2017 11:03 pm 写道: tie direct to your spinnerbait,using a snap will take away 50% of the vibration,silicone tube too

Tie double line knot, knot will hold in place much better


50% reduction that much ?.... just thought 40% only :roflmao


Well it also depends on the actual model of spinnerbaits used. I got some serious spinnerbaits, vibrate like chatterbaits. You put a snap on, it removes almost 80% vib. Vibration is the key when fished in shallow weed, the flash factor is overwhelmed due to limited depth

我用 snap就是为了不停的换饵,原来还丢失这么多的vibration,如果像这个星期五(07/14),用snap+spinnerbait还钓上16条bass(其它饵还有上),那如果不用snap,再加不说50%了,加25%多的咬钩就行 :laugh3

下次我试试不用snap! :shake
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: 求助: 关于spinner bait 连接处

楼层:#14  帖子wetnose » 16 7月 2017 11:39

Sergeantpepper @ Sun Jul 16, 2017 11:37 am 写道:
madfrog @ Sun Jul 16, 2017 11:30 am 写道:
Sergeantpepper @ 周日 7月 16, 2017 9:00 am 写道: 这主题是有关如何處理R开囗會滑線的问题, 应否使用snap swivel 要另题討論..


我的point就是不用snap就不涉及到滑线了,problem sovled :laugh3


我求教如何把餃子包好, 你叫我改吃麵..... :laugh3

:+1 :laugh3
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: 求助: 关于spinner bait 连接处

楼层:#15  帖子Sergeantpepper » 16 7月 2017 11:39

aberdeen @ Sun Jul 16, 2017 10:43 am 写道: Use small o ring,sell at tackle shop


Lemme tell you guys, this fisher knows all the tricks :fishb
Im few yrs behind... :redfaced
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 求助: 关于spinner bait 连接处

楼层:#16  帖子AngSpec » 16 7月 2017 12:23

白雪丹枫 @ 周日 7月 16, 2017 5:33 am 写道: 打个结也就一分钟,有必要加个快速接头吗? :redfaced


Bass fishermen would not need that many rods if they were to know how to tie knots! :roflmao :roflmao :roflmao
AngSpec
Brigadier General (大校/准将)
Brigadier General (大校/准将)
 
帖子: 518
注册: 08 12月 2013 23:20
Member Number (论坛会员注册序列号): #235

Re: 求助: 关于spinner bait 连接处

楼层:#17  帖子Sergeantpepper » 16 7月 2017 12:59

"...fishermen would not need that many rods...."

that's not what all the sponsors want to hear....does that ring the bell ? :shout
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 求助: 关于spinner bait 连接处

楼层:#18  帖子波澜不惊 » 16 7月 2017 13:21

aberdeen @ 周日 7月 16, 2017 10:43 am 写道: Use small o ring,sell at tackle shop

That's what I'v done
波澜不惊
General (上将)
General (上将)
 
帖子: 5450
注册: 25 5月 2014 06:52
Member Number (论坛会员注册序列号): #487

Re: 求助: 关于spinner bait 连接处

楼层:#19  帖子Sergeantpepper » 16 7月 2017 14:00

用鉄綠给R位打㷛呔也有优势的, 中 toothy critters 后, V 型不會给拉直, R位復修多了容易断..
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 求助: 关于spinner bait 连接处

楼层:#20  帖子creativeccc » 16 7月 2017 16:21

Sergeantpepper @ 周日 7月 16, 2017 2:00 pm 写道: 用鉄綠给R位打㷛呔也有优势的, 中 toothy critters 后, V 型不會给拉直, R位復修多了容易断..


有道理哦,下次我焊上看看 :D
creativeccc
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1959
注册: 26 3月 2014 10:12
Member Number (论坛会员注册序列号): #340
地址: KENNEDY & HWY7, MARKHAM
称呼: Ben

Re: 求助: 关于spinner bait 连接处

楼层:#21  帖子莫德尔 » 16 7月 2017 19:21

直接绑线!所有这些饵的精要之处就是简单简单再简单。别的都是耍流氓!
莫德尔
General (上将)
General (上将)
 
帖子: 6761
注册: 18 9月 2013 17:44
Member Number (论坛会员注册序列号): #42
称呼: 元帅

Re: 求助: 关于spinner bait 连接处

楼层:#22  帖子newcomer » 16 7月 2017 20:31

采取过以下方法:
用胶皮圈(早期的自行车的气门芯)
用线(胶线或编织线)把开口封上
加一个leader(胶线或编织线)然后在leader的另一端系成一个线环

现在换饵的时候直接剪线重新系饵。
newcomer
Brigadier General (大校/准将)
Brigadier General (大校/准将)
 
帖子: 359
注册: 26 10月 2013 14:53
Member Number (论坛会员注册序列号): #148
地址: keswick, ravenshoe rd. and leslie st.

Re: 求助: 关于spinner bait 连接处

楼层:#23  帖子Young » 16 7月 2017 21:25

madfrog @ 周六 7月 15, 2017 11:46 pm 写道:
Sergeantpepper @ 周六 7月 15, 2017 11:19 pm 写道:
madfrog @ Sat Jul 15, 2017 11:03 pm 写道: tie direct to your spinnerbait,using a snap will take away 50% of the vibration,silicone tube too

Tie double line knot, knot will hold in place much better


50% reduction that much ?.... just thought 40% only :roflmao


Well it also depends on the actual model of spinnerbaits used. I got some serious spinnerbaits, vibrate like chatterbaits. You put a snap on, it removes almost 80% vib. Vibration is the key when fished in shallow weed, the flash factor is overwhelmed due to limited depth


我用的daiwa的,也是你那种 软钢丝,拉着带振动的,手感很好很敏锐,缺点就是拉大鱼很容易变形。。。 不过要你这么说的话,的确我如果用这种spinner 就麻烦点直接绑线吧
Young
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2245
注册: 30 8月 2015 19:07
Member Number (论坛会员注册序列号): #1280
地址: Vellore, Vaughan
称呼: Young

Re: 求助: 关于spinner bait 连接处

楼层:#24  帖子Young » 16 7月 2017 21:25

aberdeen @ 周日 7月 16, 2017 10:43 am 写道: Use small o ring,sell at tackle shop


恩,好办法,可以考虑用O ring
Young
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2245
注册: 30 8月 2015 19:07
Member Number (论坛会员注册序列号): #1280
地址: Vellore, Vaughan
称呼: Young

Re: 求助: 关于spinner bait 连接处

楼层:#25  帖子Young » 16 7月 2017 21:29

Sergeantpepper @ 周日 7月 16, 2017 2:00 pm 写道: 用鉄綠给R位打㷛呔也有优势的, 中 toothy critters 后, V 型不會给拉直, R位復修多了容易断..


椒sir说得对,这种软铁丝的虽然手感好,但是拉个大鱼就变形,修复多了真有可能坏,价格也不便宜。

到底要手感,还是要耐用,好难取舍啊。。。
Young
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2245
注册: 30 8月 2015 19:07
Member Number (论坛会员注册序列号): #1280
地址: Vellore, Vaughan
称呼: Young

下一页

回到 It's All About Fishin' 钓鱼!

在线用户