
stuka850622 @ Sat Jul 15, 2017 10:08 pm 写道: 基本上spinner bait连接处都是开口的吧? 要是用快速换饵的扣,因为是开口的 所以总会乱窜,请问大家是怎么解决的?
我现在都是直接用线绑住spinner bait, 但是要换饵就比较麻烦。又不是壕 没法一次带好几根杆儿。。。。。
....use 20Ga wire with cut ends concealed after wrapping
Sergeantpepper @ Sat Jul 15, 2017 10:34 pm 写道:stuka850622 @ Sat Jul 15, 2017 10:08 pm 写道: 基本上spinner bait连接处都是开口的吧? 要是用快速换饵的扣,因为是开口的 所以总会乱窜,请问大家是怎么解决的?
我现在都是直接用线绑住spinner bait, 但是要换饵就比较麻烦。又不是壕 没法一次带好几根杆儿。。。。。
ask for o-ring for the job from local tackle shops, or use clear pvc tubing from float lights
some used to wrap that R up using steel wire





madfrog @ Sat Jul 15, 2017 11:03 pm 写道: tie direct to your spinnerbait,using a snap will take away 50% of the vibration,silicone tube too
Tie double line knot, knot will hold in place much better


Sergeantpepper @ 周六 7月 15, 2017 11:19 pm 写道:madfrog @ Sat Jul 15, 2017 11:03 pm 写道: tie direct to your spinnerbait,using a snap will take away 50% of the vibration,silicone tube too
Tie double line knot, knot will hold in place much better
50% reduction that much ?.... just thought 40% only




Sergeantpepper @ 周日 7月 16, 2017 9:00 am 写道: 这主题是有关如何處理R开囗會滑線的问题, 应否使用snap swivel 要另题討論..


madfrog @ Sun Jul 16, 2017 11:30 am 写道:Sergeantpepper @ 周日 7月 16, 2017 9:00 am 写道: 这主题是有关如何處理R开囗會滑線的问题, 应否使用snap swivel 要另题討論..
我的point就是不用snap就不涉及到滑线了,problem sovled


madfrog @ Sat Jul 15, 2017 11:46 pm 写道:Sergeantpepper @ 周六 7月 15, 2017 11:19 pm 写道:madfrog @ Sat Jul 15, 2017 11:03 pm 写道: tie direct to your spinnerbait,using a snap will take away 50% of the vibration,silicone tube too
Tie double line knot, knot will hold in place much better
50% reduction that much ?.... just thought 40% only
Well it also depends on the actual model of spinnerbaits used. I got some serious spinnerbaits, vibrate like chatterbaits. You put a snap on, it removes almost 80% vib. Vibration is the key when fished in shallow weed, the flash factor is overwhelmed due to limited depth



Sergeantpepper @ Sun Jul 16, 2017 11:37 am 写道:madfrog @ Sun Jul 16, 2017 11:30 am 写道:Sergeantpepper @ 周日 7月 16, 2017 9:00 am 写道: 这主题是有关如何處理R开囗會滑線的问题, 应否使用snap swivel 要另题討論..
我的point就是不用snap就不涉及到滑线了,problem sovled
我求教如何把餃子包好, 你叫我改吃麵.....


aberdeen @ Sun Jul 16, 2017 10:43 am 写道: Use small o ring,sell at tackle shop


白雪丹枫 @ 周日 7月 16, 2017 5:33 am 写道: 打个结也就一分钟,有必要加个快速接头吗?



aberdeen @ 周日 7月 16, 2017 10:43 am 写道: Use small o ring,sell at tackle shop

Sergeantpepper @ 周日 7月 16, 2017 2:00 pm 写道: 用鉄綠给R位打㷛呔也有优势的, 中 toothy critters 后, V 型不會给拉直, R位復修多了容易断..


madfrog @ 周六 7月 15, 2017 11:46 pm 写道:Sergeantpepper @ 周六 7月 15, 2017 11:19 pm 写道:madfrog @ Sat Jul 15, 2017 11:03 pm 写道: tie direct to your spinnerbait,using a snap will take away 50% of the vibration,silicone tube too
Tie double line knot, knot will hold in place much better
50% reduction that much ?.... just thought 40% only
Well it also depends on the actual model of spinnerbaits used. I got some serious spinnerbaits, vibrate like chatterbaits. You put a snap on, it removes almost 80% vib. Vibration is the key when fished in shallow weed, the flash factor is overwhelmed due to limited depth

aberdeen @ 周日 7月 16, 2017 10:43 am 写道: Use small o ring,sell at tackle shop

Sergeantpepper @ 周日 7月 16, 2017 2:00 pm 写道: 用鉄綠给R位打㷛呔也有优势的, 中 toothy critters 后, V 型不會给拉直, R位復修多了容易断..
