断掉了,十万火急

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

Re: 断掉了,十万火急

楼层:#26  帖子Fishingdaddy » 23 12月 2019 22:22

三大侠有延长杆了吗?不知道那个一般带一个还是两个螺丝,如果带两个买根杆子算了。
Fishingdaddy
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2737
注册: 11 2月 2019 22:07
Member Number (论坛会员注册序列号): #2559

Re: 断掉了,十万火急

楼层:#27  帖子johndxu » 23 12月 2019 22:36

sunfish123 @ 23 12月 2019 21:10 写道:
Sergeantpepper @ 周一 12月 23, 2019 9:08 pm 写道:
sunfish123 @ Mon Dec 23, 2019 9:01 pm 写道:


刚刚查了一下rapala的网站, 有卖。

包括运费,21 大洋。

哦,买的螺栓,5个4.5 大洋。


呢馬真黑! :cry



就说嘛,差不多半个钻头的价格。

估计Rapala等用的也是标准的螺栓,他们也不会专门去设计做一个螺栓,所以查查看,很有可能是标准内六角螺栓
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: 断掉了,十万火急

楼层:#28  帖子Sergeantpepper » 23 12月 2019 22:50

Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 断掉了,十万火急

楼层:#29  帖子白雪丹枫 » 23 12月 2019 23:25

sunfish123 @ 周一 12月 23, 2019 9:03 pm 写道:
Sergeantpepper @ 周一 12月 23, 2019 8:57 pm 写道: 正路當然買個replacement啦(連運費也不便宜)....十万火急就要DIY囉 :fishb

https://www.fishusa.com/StrikeMaster-Hand-Ice-Auger-Replacement-Wingbolt



决定就这样将就着用,也不要用另外一个螺母打磨了,因为哦根本就没有这个工具去弄。


去Princessauto买个10毫米外径6毫米内径的bushing就行了,很常见的规格。如果嫌太长就截短些。

我这倒是有,就是不知道什么时候才有机会交给您。如果需要也不急,就说一声,我找个机会让人转交一下。
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14857
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: 断掉了,十万火急

楼层:#30  帖子johndxu » 23 12月 2019 23:27

johndxu @ 23 12月 2019 21:36 写道:
sunfish123 @ 23 12月 2019 21:10 写道:
Sergeantpepper @ 周一 12月 23, 2019 9:08 pm 写道:

呢馬真黑! :cry



就说嘛,差不多半个钻头的价格。

估计Rapala等用的也是标准的螺栓,他们也不会专门去设计做一个螺栓,所以查查看,很有可能是标准内六角螺栓

查了,六毫米的内六角螺栓头的尺寸正好是十毫米。所以买一个标准内六角螺栓就可以了
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: 断掉了,十万火急

楼层:#31  帖子johndxu » 23 12月 2019 23:43

而且六角螺栓都是Heat Treated, 强度硬度比较高。
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: 断掉了,十万火急

楼层:#32  帖子sunfish123 » 23 12月 2019 23:46

问题是6m 的没有螺丝的那一部分也是6m,不是10吗。 光是螺栓头没有用 ,看看原装的
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
sunfish123
General (上将)
General (上将)
 
帖子: 7883
注册: 08 12月 2014 21:10
Member Number (论坛会员注册序列号): #896
地址: Dufferin Rutherford

Re: 断掉了,十万火急

楼层:#33  帖子Sergeantpepper » 23 12月 2019 23:51

K, 鵝先前查看到啲尺寸規格原來是Small Head啲, 真還不知有這個分別.....太黑了 :laugh3
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 断掉了,十万火急

楼层:#34  帖子Sergeantpepper » 23 12月 2019 23:56

sunfish123 @ Mon Dec 23, 2019 10:46 pm 写道: 问题是6m 的没有螺丝的那一部分也是6m,不是10吗。 光是螺栓头没有用 ,看看原装的


螺栓头D 有10mm 和8.5mm啲, 是D起作用, 不是没有螺丝的那一部分呀

買粒Standard Socket Head M6 screw/bolt, 螺絲頭應該是斜邊啲, 頭啲外徑會是10mm...
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
最后由 Sergeantpepper 编辑于 24 12月 2019 00:12,总共编辑了 1 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 断掉了,十万火急

楼层:#35  帖子johndxu » 24 12月 2019 00:10

sunfish123 @ 23 12月 2019 22:46 写道: 问题是6m 的没有螺丝的那一部分也是6m,不是10吗。 光是螺栓头没有用 ,看看原装的

没有螺丝的部分是六毫米,有螺丝的部分稍小于六毫米,最好是有光杆部分的,全部是螺丝的,也凑合可以用。但是现在光杆部分的比较难找,Homedepot基本上不卖metric的。Princess 有卖,一整盒十块。EBay上有五块十根的,免运费,但是到货比较慢
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: 断掉了,十万火急

楼层:#36  帖子wetnose » 24 12月 2019 20:26

sunfish123 @ Mon Dec 23, 2019 4:48 pm 写道:
Sergeantpepper @ 周一 12月 23, 2019 2:00 pm 写道: 途中鬆掉可以理解,但这是扭断呀,干得不也太激了 :laugh3
河上笑比三大虾还早出事。。。就買管6mm 的socket head bolt/screw 凑合着用吧....配六角匙用

https://www.homedepot.com/p/Everbilt-M6-1-0-x-30-mm-Alloy-Socket-Cap-Screw-2-Piece-803368/204274258



断掉的搞出来了,就是用老虎嵌使劲拧给拧出来的,在princeauto买了一袋5个的螺栓,给装进去了。

新的问题是,只有螺丝的那一边受力,另外一边空着。

买的螺丝明显是太长了!可以考虑换短一些的加上螺母,我的就是这样子用的,好几年了。
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: 断掉了,十万火急

楼层:#37  帖子eric_gao » 24 12月 2019 20:29

我已经推荐了你最牛的钻。
以我的人格担保。 :laugh3 :roflmao
eric_gao
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2298
注册: 04 1月 2014 21:11
Member Number (论坛会员注册序列号): #273

Re: 断掉了,十万火急

楼层:#38  帖子Sergeantpepper » 24 12月 2019 20:47

wetnose @ Tue Dec 24, 2019 7:26 pm 写道:
sunfish123 @ Mon Dec 23, 2019 4:48 pm 写道:
Sergeantpepper @ 周一 12月 23, 2019 2:00 pm 写道: 途中鬆掉可以理解,但这是扭断呀,干得不也太激了 :laugh3
河上笑比三大虾还早出事。。。就買管6mm 的socket head bolt/screw 凑合着用吧....配六角匙用

https://www.homedepot.com/p/Everbilt-M6-1-0-x-30-mm-Alloy-Socket-Cap-Screw-2-Piece-803368/204274258



断掉的搞出来了,就是用老虎嵌使劲拧给拧出来的,在princeauto买了一袋5个的螺栓,给装进去了。

新的问题是,只有螺丝的那一边受力,另外一边空着。

买的螺丝明显是太长了!可以考虑换短一些的加上螺母,我的就是这样子用的,好几年了


求故事 :shake :laugh3
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 断掉了,十万火急

楼层:#39  帖子wetnose » 24 12月 2019 20:51

Sergeantpepper @ Tue Dec 24, 2019 7:47 pm 写道:
wetnose @ Tue Dec 24, 2019 7:26 pm 写道:
sunfish123 @ Mon Dec 23, 2019 4:48 pm 写道:


断掉的搞出来了,就是用老虎嵌使劲拧给拧出来的,在princeauto买了一袋5个的螺栓,给装进去了。

新的问题是,只有螺丝的那一边受力,另外一边空着。

买的螺丝明显是太长了!可以考虑换短一些的加上螺母,我的就是这样子用的,好几年了


求故事 :shake :laugh3

我的钻是从论坛一个哥们哪里搞的二手的,到我手里面的时候就没有这个东东,不是我拧断的,我没有那么大的力气啊! :laugh3 :roflmao
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: 断掉了,十万火急

楼层:#40  帖子Sergeantpepper » 24 12月 2019 21:00

這個哥们難道是......他 ? :laugh3
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 断掉了,十万火急

楼层:#41  帖子wetnose » 24 12月 2019 21:02

wetnose @ Tue Dec 24, 2019 7:26 pm 写道:
sunfish123 @ Mon Dec 23, 2019 4:48 pm 写道:
Sergeantpepper @ 周一 12月 23, 2019 2:00 pm 写道: 途中鬆掉可以理解,但这是扭断呀,干得不也太激了 :laugh3
河上笑比三大虾还早出事。。。就買管6mm 的socket head bolt/screw 凑合着用吧....配六角匙用

https://www.homedepot.com/p/Everbilt-M6-1-0-x-30-mm-Alloy-Socket-Cap-Screw-2-Piece-803368/204274258



断掉的搞出来了,就是用老虎嵌使劲拧给拧出来的,在princeauto买了一袋5个的螺栓,给装进去了。

新的问题是,只有螺丝的那一边受力,另外一边空着。

买的螺丝明显是太长了!可以考虑换短一些的加上螺母,我的就是这样子用的,好几年了。

我的这个螺丝部分是3cm,六边形的螺帽上面是SFC 8.8,强度应该比钻上原装的强很多。
_$027R.JPG
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: 断掉了,十万火急

楼层:#42  帖子Sergeantpepper » 24 12月 2019 21:50

wetnose @ Tue Dec 24, 2019 8:02 pm 写道:
wetnose @ Tue Dec 24, 2019 7:26 pm 写道:
sunfish123 @ Mon Dec 23, 2019 4:48 pm 写道:


断掉的搞出来了,就是用老虎嵌使劲拧给拧出来的,在princeauto买了一袋5个的螺栓,给装进去了。

新的问题是,只有螺丝的那一边受力,另外一边空着。

买的螺丝明显是太长了!可以考虑换短一些的加上螺母,我的就是这样子用的,好几年了。

我的这个螺丝部分是3cm,六边形的螺帽上面是SFC 8.8,强度应该比钻上原装的强很多。
_$027R.JPG


8.8好像只是起跳, 對上還有10.9 和 12.9呢....當然有些較次啲是沒有markings啲 :laugh3
https://www.boltdepot.com/fastener-information/materials-and-grades/bolt-grade-chart.aspx
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 断掉了,十万火急

楼层:#43  帖子wetnose » 24 12月 2019 22:17

Sergeantpepper @ Tue Dec 24, 2019 8:50 pm 写道:
wetnose @ Tue Dec 24, 2019 8:02 pm 写道:
wetnose @ Tue Dec 24, 2019 7:26 pm 写道:
买的螺丝明显是太长了!可以考虑换短一些的加上螺母,我的就是这样子用的,好几年了。

我的这个螺丝部分是3cm,六边形的螺帽上面是SFC 8.8,强度应该比钻上原装的强很多。
_$027R.JPG


8.8好像只是起跳, 對上還有10.9 和 12.9呢....當然有些較次啲是沒有markings啲 :laugh3
https://www.boltdepot.com/fastener-information/materials-and-grades/bolt-grade-chart.aspx

就是说原装的那个螺丝也质量太差了,三大侠就能把它拧断啊! :laugh3
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: 断掉了,十万火急

楼层:#44  帖子xiaolu » 24 12月 2019 22:40

wetnose @ Tue Dec 24, 2019 9:17 pm 写道:
Sergeantpepper @ Tue Dec 24, 2019 8:50 pm 写道:
wetnose @ Tue Dec 24, 2019 8:02 pm 写道:
我的这个螺丝部分是3cm,六边形的螺帽上面是SFC 8.8,强度应该比钻上原装的强很多。
_$027R.JPG


8.8好像只是起跳, 對上還有10.9 和 12.9呢....當然有些較次啲是沒有markings啲 :laugh3
https://www.boltdepot.com/fastener-information/materials-and-grades/bolt-grade-chart.aspx

就是说原装的那个螺丝也质量太差了,三大侠就能把它拧断啊! :laugh3

是的, 我的前前后后几个钻, 原装的辣个螺丝,已经断过两次了。 然后就是“后母的婆”买的螺丝拧上就一切都搞腚 OK 啦。
xiaolu
Site Admin (站长)
 
帖子: 42626
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: 断掉了,十万火急

楼层:#45  帖子jimi » 24 12月 2019 22:41

xiaolu @ 周二 12月 24, 2019 9:40 pm 写道:
wetnose @ Tue Dec 24, 2019 9:17 pm 写道:
Sergeantpepper @ Tue Dec 24, 2019 8:50 pm 写道:

8.8好像只是起跳, 對上還有10.9 和 12.9呢....當然有些較次啲是沒有markings啲 :laugh3
https://www.boltdepot.com/fastener-information/materials-and-grades/bolt-grade-chart.aspx

就是说原装的那个螺丝也质量太差了,三大侠就能把它拧断啊! :laugh3

是的, 我的前前后后几个钻, 原装的辣个螺丝,已经断过两次了。 然后就是“后母的婆”买的螺丝拧上就一切都搞腚 OK 啦。

还是你牛,我只是刀片换这两付八寸和一付5寸的 :laugh3
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 断掉了,十万火急

楼层:#46  帖子Sergeantpepper » 24 12月 2019 22:43

xiaolu @ Tue Dec 24, 2019 9:40 pm 写道:
wetnose @ Tue Dec 24, 2019 9:17 pm 写道:
Sergeantpepper @ Tue Dec 24, 2019 8:50 pm 写道:

8.8好像只是起跳, 對上還有10.9 和 12.9呢....當然有些較次啲是沒有markings啲 :laugh3
https://www.boltdepot.com/fastener-information/materials-and-grades/bolt-grade-chart.aspx

就是说原装的那个螺丝也质量太差了,三大侠就能把它拧断啊! :laugh3

是的, 我的前前后后几个钻, 原装的辣个螺丝,已经断过两次了。 然后就是“后母的婆”买的螺丝拧上就一切都搞腚 OK 啦。


鵝K, 未断过的可算是小眾 ?! :roflmao
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 断掉了,十万火急

楼层:#47  帖子wetnose » 24 12月 2019 22:55

Sergeantpepper @ Tue Dec 24, 2019 9:43 pm 写道:
xiaolu @ Tue Dec 24, 2019 9:40 pm 写道:
wetnose @ Tue Dec 24, 2019 9:17 pm 写道:
就是说原装的那个螺丝也质量太差了,三大侠就能把它拧断啊! :laugh3

是的, 我的前前后后几个钻, 原装的辣个螺丝,已经断过两次了。 然后就是“后母的婆”买的螺丝拧上就一切都搞腚 OK 啦。


鵝K, 未断过的可算是小眾 ?! :roflmao

我的那个没有原装螺丝的钻是谁的你应该大致也许心中有数了吧? :laugh3
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: 断掉了,十万火急

楼层:#48  帖子alfishing » 24 12月 2019 23:12

俄觉得,在杆子上90度角重新钻个洞,是比较简单的方法。
alfishing
Colonel (上校)
 
帖子: 154
注册: 29 3月 2014 03:17
Member Number (论坛会员注册序列号): #343

Re: 断掉了,十万火急

楼层:#49  帖子Sergeantpepper » 24 12月 2019 23:13

wetnose @ Tue Dec 24, 2019 9:55 pm 写道:
Sergeantpepper @ Tue Dec 24, 2019 9:43 pm 写道:
xiaolu @ Tue Dec 24, 2019 9:40 pm 写道:
是的, 我的前前后后几个钻, 原装的辣个螺丝,已经断过两次了。 然后就是“后母的婆”买的螺丝拧上就一切都搞腚 OK 啦。


鵝K, 未断过的可算是小眾 ?! :roflmao

我的那个没有原装螺丝的钻是谁的你应该大致也许心中有数了吧? :laugh3

这也太明顯了吧 :laugh3
那誰誰誰弄断过两次, 第一次把殘钻让了给你, 第二次学习了你DIY 之道, 自己搞定 :shout
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 断掉了,十万火急

楼层:#50  帖子Sergeantpepper » 24 12月 2019 23:20

alfishing @ Tue Dec 24, 2019 10:12 pm 写道: 俄觉得,在杆子上90度角重新钻个洞,是比较简单的方法。


也是办法, 但要钻的两个M6洞要对中, 工具不齐备會有点难度呀.....当然也可把二孔加大到M7將就一下 :laugh3 把誤差包涵包涵
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

上一页下一页

回到 It's All About Fishin' 钓鱼!

在线用户