求推荐-上手杆轮(已购)

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

Re: 求推荐-上手杆轮

楼层:#51  帖子Fishingdaddy » 10 7月 2019 23:47

波澜不惊 @ 10 Jul 2019 23:40 写道:
jimi @ 周三 7月 10, 2019 10:26 pm 写道:
wetnose @ 周三 7月 10, 2019 10:19 pm 写道:
CT康宝钓青蛙,想想就不靠谱! :laugh3

烧火棍就行,C T康宝不比烧火棍强? :laugh3

崔大师净误导,要么ul,要么烧火棍

鹅还从UL到烧火棍都有。
Fishingdaddy
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2737
注册: 11 2月 2019 22:07
Member Number (论坛会员注册序列号): #2559

Re: 求推荐-上手杆轮

楼层:#52  帖子波澜不惊 » 10 7月 2019 23:49

wetnose @ 周三 7月 10, 2019 10:17 pm 写道:
yangzw2002 @ Wed Jul 10, 2019 1:47 pm 写道: 卡牙科钓青蛙我觉得悬啊,拉青蛙很大劲,拉空了容易落水

:+1 拉青蛙动作大,拉空了容易落水!

那我就坐着
波澜不惊
General (上将)
General (上将)
 
帖子: 5449
注册: 25 5月 2014 06:52
Member Number (论坛会员注册序列号): #487

Re: 求推荐-上手杆轮

楼层:#53  帖子Young » 10 7月 2019 23:49

Sergeantpepper @ 周三 7月 10, 2019 4:50 pm 写道:
波澜不惊 @ Wed Jul 10, 2019 2:44 pm 写道:
Sergeantpepper @ 周三 7月 10, 2019 2:29 pm 写道:

高速目的在減短回收準备再拋絲的时间, 所謂 downtime
理論上回收时腕力會增大, 自己看着办吧 :boat

没见哪个轮子有22lb+的drag, trolling 有很多轮子可以达标


e.g. Abu Revo 有


abu的轮子还是算了吧。我有一个abu revo MGXtreme II 软木手柄的那个 MRSP $500美金,官方drag 多少您自己可以看,实际drag 亲测拧死了5-6lb.....网上一搜 好多人都说这款轮子的drag是垃圾 根本达不到官方的数据。abu轮子吹牛逼的水分太大,不要信....
Young
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2245
注册: 30 8月 2015 19:07
Member Number (论坛会员注册序列号): #1280
地址: Vellore, Vaughan
称呼: Young

Re: 求推荐-上手杆轮

楼层:#54  帖子波澜不惊 » 11 7月 2019 01:08

Young @ 周三 7月 10, 2019 11:49 pm 写道:
Sergeantpepper @ 周三 7月 10, 2019 4:50 pm 写道:
波澜不惊 @ Wed Jul 10, 2019 2:44 pm 写道:
没见哪个轮子有22lb+的drag, trolling 有很多轮子可以达标


e.g. Abu Revo 有


abu的轮子还是算了吧。我有一个abu revo MGXtreme II 软木手柄的那个 MRSP $500美金,官方drag 多少您自己可以看,实际drag 亲测拧死了5-6lb.....网上一搜 好多人都说这款轮子的drag是垃圾 根本达不到官方的数据。abu轮子吹牛逼的水分太大,不要信....

多谢
波澜不惊
General (上将)
General (上将)
 
帖子: 5449
注册: 25 5月 2014 06:52
Member Number (论坛会员注册序列号): #487

Re: 求推荐-上手杆轮

楼层:#55  帖子Sergeantpepper » 11 7月 2019 05:57

Young @ Wed Jul 10, 2019 11:49 pm 写道:
Sergeantpepper @ 周三 7月 10, 2019 4:50 pm 写道:
波澜不惊 @ Wed Jul 10, 2019 2:44 pm 写道:
没见哪个轮子有22lb+的drag, trolling 有很多轮子可以达标


e.g. Abu Revo 有


abu的轮子还是算了吧。我有一个abu revo MGXtreme II 软木手柄的那个 MRSP $500美金,官方drag 多少您自己可以看,实际drag 亲测拧死了5-6lb.....网上一搜 好多人都说这款轮子的drag是垃圾 根本达不到官方的数据。abu轮子吹牛逼的水分太大,不要信....


阿布本土造的一向牛, 一经OEM 就此情不再?
drag 不给力时可用thumbing 搭夠呀 :laugh3
最后由 Sergeantpepper 编辑于 11 7月 2019 06:18,总共编辑了 1 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 求推荐-上手杆轮

楼层:#56  帖子Sergeantpepper » 11 7月 2019 06:03

gar @ Wed Jul 10, 2019 11:05 pm 写道:
Sergeantpepper @ 周三 7月 10, 2019 5:29 pm 写道:
Pungo @ Wed Jul 10, 2019 4:39 pm 写道:


:+1
in Flipping and Pitching just thumb the spool all the way when letting line out, no chance of 炒粉 at all
...just practise in the park, never on the lake...that way you'll be 100% concentrated on what you are doing

For casting
try overhead casting to start with
dont cast against the wind
use 1/4oz or above SB, so that you may see better how it travels in the air...lands etc

First adjust the Casting Control Knob
....by the cranking side of the reel, starting from tight to less tight
hold the rod level straight out, thumb down the release clutch, the lure shall drop, when the setting is too tight the lure will stop midway in the air, retrieve, loosen the knob a bit, and try release again, until the lure hits the gound and stops there and no over running without thumbing the spool, you've got the right setting....
this control knob applies static friction to the axle's end to avoid over running at low spool speed, i.e. at the start of each casting and when the lure hits water...lures of different weight requires different setting for the best performance

Then adjust the Brake, magnetic or centrifugal type
the brake applies kinetic friction to the rotating spool during acceleration in the air, and governs it
speeding will result in 炒粉
tight brake is 炒粉 proof but distance discouraging, vise versa
if the casting control knob has been set right, you may start with the brake in mid-setting, then loosen bit by bit for the distance...

when i first tried my 1st generation Chronarch in the park, i did everything right stated above, and i was casting like a Pro, 炒粉? what 炒粉? :laugh3


一直没弄明白上手轮两边儿的刹车有什么区别?朋友的一个curoda让我先用着,我知道右边打开盖子可以调整刹车,但是左边那个钮调起来更方便。


不是那个更方便, 是两个都要調呀......当然也有些上了道的會把brake 给废了不用, 改用thumbing 作braking, 能抛更远而不炒粉....+30%吧, 鵝能做到的
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 求推荐-上手杆轮

楼层:#57  帖子Beeknight » 11 7月 2019 09:40

Sergeantpepper @ 周三 7月 10, 2019 5:29 pm 写道:
Pungo @ Wed Jul 10, 2019 4:39 pm 写道:
波澜不惊 @ Wed Jul 10, 2019 4:34 pm 写道: 如何避免炒粉?


:+1
in Flipping and Pitching just thumb the spool all the way when letting line out, no chance of 炒粉 at all
...just practise in the park, never on the lake...that way you'll be 100% concentrated on what you are doing

For casting
try overhead casting to start with
dont cast against the wind
use 1/4oz or above SB, so that you may see better how it travels in the air...lands etc

First adjust the Casting Control Knob
....by the cranking side of the reel, starting from tight to less tight
hold the rod level straight out, thumb down the release clutch, the lure shall drop, when the setting is too tight the lure will stop midway in the air, retrieve, loosen the knob a bit, and try release again, until the lure hits the gound and stops there and no over running without thumbing the spool, you've got the right setting....
this control knob applies static friction to the axle's end to avoid over running at low spool speed, i.e. at the start of each casting and when the lure hits water...lures of different weight requires different setting for the best performance

Then adjust the Brake, magnetic or centrifugal type
the brake applies kinetic friction to the rotating spool during acceleration in the air, and governs it
speeding will result in 炒粉
tight brake is 炒粉 proof but distance discouraging, vise versa
if the casting control knob has been set right, you may start with the brake in mid-setting, then loosen bit by bit for the distance...

when i first tried my 1st generation Chronarch in the park, i did everything right stated above, and i was casting like a Pro, 炒粉? what 炒粉? :laugh3


:shake :shake Solid advice! :up Will try again once I get that bird nest untangled :laugh3
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: 求推荐-上手杆轮

楼层:#58  帖子莫德尔 » 11 7月 2019 10:26

阿布有什么问题么?没觉得。两三百的阿布用几年下来不错啊。五六百的阿布买不起不评价。和很多人相反,竿我就喜欢呆娃,轮就爱谁谁。但呆娃的轮我就不喜欢,没理由。
莫德尔
General (上将)
General (上将)
 
帖子: 6734
注册: 18 9月 2013 17:44
Member Number (论坛会员注册序列号): #42
称呼: 元帅

Re: 求推荐-上手杆轮

楼层:#59  帖子jimi » 11 7月 2019 14:19

波澜不惊 @ 周三 7月 10, 2019 11:40 pm 写道:
jimi @ 周三 7月 10, 2019 10:26 pm 写道:
wetnose @ 周三 7月 10, 2019 10:19 pm 写道:
CT康宝钓青蛙,想想就不靠谱! :laugh3

烧火棍就行,C T康宝不比烧火棍强? :laugh3

崔大师净误导,要么ul,要么烧火棍

:laugh3 :laugh3 :laugh3
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 求推荐-上手杆轮

楼层:#60  帖子jimi » 11 7月 2019 14:19

莫德尔 @ 周四 7月 11, 2019 10:26 am 写道: 阿布有什么问题么?没觉得。两三百的阿布用几年下来不错啊。五六百的阿布买不起不评价。和很多人相反,竿我就喜欢呆娃,轮就爱谁谁。但呆娃的轮我就不喜欢,没理由。

:+1
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 求推荐-上手杆轮

楼层:#61  帖子jimi » 11 7月 2019 14:37

jimi @ 周四 7月 11, 2019 2:19 pm 写道:
莫德尔 @ 周四 7月 11, 2019 10:26 am 写道: 阿布有什么问题么?没觉得。两三百的阿布用几年下来不错啊。五六百的阿布买不起不评价。和很多人相反,竿我就喜欢呆娃,轮就爱谁谁。但呆娃的轮我就不喜欢,没理由。

:+1

+1和哭的图标太近了 :laugh3 。我也用A布,好像司令也用阿布,没什么不好啊,除了不牛B以外,目前否沒啥问题
我用Pro Max,两个上手轮,还可以 :shake
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 求推荐-上手杆轮

楼层:#62  帖子铁马冰河西门吹雪 » 11 7月 2019 14:40

st。croix avid 上手低价甩卖
上手不会用的飘过
铁马冰河西门吹雪
General (上将)
General (上将)
 
帖子: 10577
注册: 18 9月 2013 00:23
Member Number (论坛会员注册序列号): #33
地址: 密室
称呼: 西门吹雪

Re: 求推荐-上手杆轮

楼层:#63  帖子jimi » 11 7月 2019 14:44

铁马冰河西门吹雪 @ 周四 7月 11, 2019 2:40 pm 写道: st。croix avid 上手低价甩卖
上手不会用的飘过

帮顶 :shake
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 求推荐-上手杆轮

楼层:#64  帖子Sergeantpepper » 11 7月 2019 15:11

jimi @ Thu Jul 11, 2019 2:37 pm 写道:
jimi @ 周四 7月 11, 2019 2:19 pm 写道:
莫德尔 @ 周四 7月 11, 2019 10:26 am 写道: 阿布有什么问题么?没觉得。两三百的阿布用几年下来不错啊。五六百的阿布买不起不评价。和很多人相反,竿我就喜欢呆娃,轮就爱谁谁。但呆娃的轮我就不喜欢,没理由。

:+1

+1和哭的图标太近了 :laugh3 。我也用A布,好像司令也用阿布,没什么不好啊,除了不牛B以外,目前否沒啥问题
我用Pro Max,两个上手轮,还可以 :shake


Pro Max 啲 max drag 才得18 lbs, 差劲呀 :laugh3
小声问, 那也配UL嗎 :fishb
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 求推荐-上手杆轮

楼层:#65  帖子jimi » 11 7月 2019 15:20

Sergeantpepper @ 周四 7月 11, 2019 3:11 pm 写道:
jimi @ Thu Jul 11, 2019 2:37 pm 写道:
jimi @ 周四 7月 11, 2019 2:19 pm 写道:
:+1

+1和哭的图标太近了 :laugh3 。我也用A布,好像司令也用阿布,没什么不好啊,除了不牛B以外,目前否沒啥问题
我用Pro Max,两个上手轮,还可以 :shake


Pro Max 啲 max drag 才得18 lbs, 差劲呀 :laugh3
小声问, 那也配UL嗎 :fishb

18还不够?要钓鱼京鱼 :laugh3
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 求推荐-上手杆轮

楼层:#66  帖子jimi » 11 7月 2019 15:21

Sergeantpepper @ 周四 7月 11, 2019 3:11 pm 写道:
jimi @ Thu Jul 11, 2019 2:37 pm 写道:
jimi @ 周四 7月 11, 2019 2:19 pm 写道:
:+1

+1和哭的图标太近了 :laugh3 。我也用A布,好像司令也用阿布,没什么不好啊,除了不牛B以外,目前否沒啥问题
我用Pro Max,两个上手轮,还可以 :shake


Pro Max 啲 max drag 才得18 lbs, 差劲呀 :laugh3
小声问, 那也配UL嗎 :fishb

小声回,U L有上手么? :laugh3
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 求推荐-上手杆轮

楼层:#67  帖子Beginner » 11 7月 2019 15:27

铁马冰河西门吹雪 @ 周四 7月 11, 2019 2:40 pm 写道: st。croix avid 上手低价甩卖
上手不会用的飘过

1节?
Beginner
General (上将)
General (上将)
 
帖子: 6026
注册: 26 10月 2016 21:19
Member Number (论坛会员注册序列号): #1772

Re: 求推荐-上手杆轮

楼层:#68  帖子Sergeantpepper » 11 7月 2019 15:39

jimi @ Thu Jul 11, 2019 3:21 pm 写道:
Sergeantpepper @ 周四 7月 11, 2019 3:11 pm 写道:
jimi @ Thu Jul 11, 2019 2:37 pm 写道:
+1和哭的图标太近了 :laugh3 。我也用A布,好像司令也用阿布,没什么不好啊,除了不牛B以外,目前否沒啥问题
我用Pro Max,两个上手轮,还可以 :shake


Pro Max 啲 max drag 才得18 lbs, 差劲呀 :laugh3
小声问, 那也配UL嗎 :fishb

小声回,U L有上手么? :laugh3


有, 還雙頭哩 :fishb
https://www.aliexpress.com/item/32865862975.html?spm=2114.search0302.3.1.5ab01486wNwrmv&ws_ab_test=searchweb0_0%2Csearchweb201602_0_10084_10083_10130_10547_10546_10887_10307_321_453_10548_322_454_10618_536_10065_317_537_10068_319_10059_10103_10884_10696%2Csearchweb201603_0%2CppcSwitch_0&algo_pvid=fe30fcba-667c-4829-a73f-ab302e0ffebf&algo_expid=fe30fcba-667c-4829-a73f-ab302e0ffebf-0
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 求推荐-上手杆轮

楼层:#69  帖子jimi » 11 7月 2019 15:43

Sergeantpepper @ 周四 7月 11, 2019 3:39 pm 写道:
jimi @ Thu Jul 11, 2019 3:21 pm 写道:
Sergeantpepper @ 周四 7月 11, 2019 3:11 pm 写道:

Pro Max 啲 max drag 才得18 lbs, 差劲呀 :laugh3
小声问, 那也配UL嗎 :fishb

小声回,U L有上手么? :laugh3


有, 還雙頭哩 :fishb
https://www.aliexpress.com/item/32865862975.html?spm=2114.search0302.3.1.5ab01486wNwrmv&ws_ab_test=searchweb0_0%2Csearchweb201602_0_10084_10083_10130_10547_10546_10887_10307_321_453_10548_322_454_10618_536_10065_317_537_10068_319_10059_10103_10884_10696%2Csearchweb201603_0%2CppcSwitch_0&algo_pvid=fe30fcba-667c-4829-a73f-ab302e0ffebf&algo_expid=fe30fcba-667c-4829-a73f-ab302e0ffebf-0

:up 这也行?
如果婶考姨出U L上手,我买一个 :laugh3
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 求推荐-上手杆轮

楼层:#70  帖子Pungo » 11 7月 2019 17:57

jimi @ Thu Jul 11, 2019 2:37 pm 写道:
jimi @ 周四 7月 11, 2019 2:19 pm 写道:
莫德尔 @ 周四 7月 11, 2019 10:26 am 写道: 阿布有什么问题么?没觉得。两三百的阿布用几年下来不错啊。五六百的阿布买不起不评价。和很多人相反,竿我就喜欢呆娃,轮就爱谁谁。但呆娃的轮我就不喜欢,没理由。

:+1

+1和哭的图标太近了 :laugh3 。我也用A布,好像司令也用阿布,没什么不好啊,除了不牛B以外,目前否沒啥问题
我用Pro Max,两个上手轮,还可以 :shake

我买abu就是因为看了元帅的文章
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: 求推荐-上手杆轮

楼层:#71  帖子jimi » 11 7月 2019 18:20

Pungo @ 周四 7月 11, 2019 5:57 pm 写道:
jimi @ Thu Jul 11, 2019 2:37 pm 写道:
jimi @ 周四 7月 11, 2019 2:19 pm 写道:
:+1

+1和哭的图标太近了 :laugh3 。我也用A布,好像司令也用阿布,没什么不好啊,除了不牛B以外,目前否沒啥问题
我用Pro Max,两个上手轮,还可以 :shake

我买abu就是因为看了元帅的文章

我是江二哥推荐俺用这个的,价格便宜量又足,而且主要是轮子小,适合俺 :shake :up
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 求推荐-上手杆轮

楼层:#72  帖子jimi » 11 7月 2019 18:25

Pungo @ 周四 7月 11, 2019 5:57 pm 写道:
jimi @ Thu Jul 11, 2019 2:37 pm 写道:
jimi @ 周四 7月 11, 2019 2:19 pm 写道:
:+1

+1和哭的图标太近了 :laugh3 。我也用A布,好像司令也用阿布,没什么不好啊,除了不牛B以外,目前否沒啥问题
我用Pro Max,两个上手轮,还可以 :shake

我买abu就是因为看了元帅的文章

对于轮子的了解,有两个最牛B人物,西部阿拉飞,东部江二哥, :up :yes
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 求推荐-上手杆轮

楼层:#73  帖子Pungo » 11 7月 2019 18:26

jimi @ Thu Jul 11, 2019 6:20 pm 写道:
Pungo @ 周四 7月 11, 2019 5:57 pm 写道:
jimi @ Thu Jul 11, 2019 2:37 pm 写道:
+1和哭的图标太近了 :laugh3 。我也用A布,好像司令也用阿布,没什么不好啊,除了不牛B以外,目前否沒啥问题
我用Pro Max,两个上手轮,还可以 :shake

我买abu就是因为看了元帅的文章

我是江二哥推荐俺用这个的,价格便宜量又足,而且主要是轮子小,适合俺 :shake :up

你生瓜竿用户用普肉马克斯,不搭啊
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: 求推荐-上手杆轮

楼层:#74  帖子jimi » 11 7月 2019 18:37

Pungo @ 周四 7月 11, 2019 6:26 pm 写道:
jimi @ Thu Jul 11, 2019 6:20 pm 写道:
Pungo @ 周四 7月 11, 2019 5:57 pm 写道:
我买abu就是因为看了元帅的文章

我是江二哥推荐俺用这个的,价格便宜量又足,而且主要是轮子小,适合俺 :shake :up

你生瓜竿用户用普肉马克斯,不搭啊

可以了,俺都低端货,有的玩就满足了 :shake
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 求推荐-上手杆轮

楼层:#75  帖子jimi » 11 7月 2019 18:37

Pungo @ 周四 7月 11, 2019 6:26 pm 写道:
jimi @ Thu Jul 11, 2019 6:20 pm 写道:
Pungo @ 周四 7月 11, 2019 5:57 pm 写道:
我买abu就是因为看了元帅的文章

我是江二哥推荐俺用这个的,价格便宜量又足,而且主要是轮子小,适合俺 :shake :up

你生瓜竿用户用普肉马克斯,不搭啊

上手俺没有生瓜 :shake
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

上一页下一页

回到 It's All About Fishin' 钓鱼!

在线用户