[DIY] Ice Anchor for snow machine users

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

[DIY] Ice Anchor for snow machine users

楼层:#1  帖子Sergeantpepper » 14 3月 2019 14:10

I used to drive out a lot in the 4Runner a decade ago, off of JP, WB etc
always brought along a "come-along" (hand winch) and a home-made Ice Anchor to handle crack troubles
2"x2"x 30"L iron angle + 1/2" eyebolt ( one in the pic was opened after a heavy pull, better use welded/casted ones :laugh3 )

the end rope is for pulling the anchor back up from the hole
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: [DIY] Ice Anchor for snow machine users

楼层:#2  帖子阿恩 » 14 3月 2019 15:01

神探在家搞科研呢?
阿恩
General (上将)
General (上将)
 
帖子: 6684
注册: 18 11月 2013 11:46
Member Number (论坛会员注册序列号): #193
地址: Steeles & Don Mills, North York

Re: [DIY] Ice Anchor for snow machine users

楼层:#3  帖子Sergeantpepper » 14 3月 2019 15:12

阿恩 @ Thu Mar 14, 2019 3:01 pm 写道: 神探在家搞科研呢?

这东东只是common sense, 当然不是什高科技, 但有些ATV'er 都忽视其重要性, 用条枕木配合winch 算球....但枕木不好用
剛與漁友談及此事, 遂上贴分享个人经驗, 謹此而已...不合甪的不甪理會 :fishb
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: [DIY] Ice Anchor for snow machine users

楼层:#4  帖子eric_gao » 14 3月 2019 15:34

Sergeantpepper @ 周四 3月 14, 2019 2:10 pm 写道: I used to drive out a lot in the 4Runner a decade ago, off of JP, WB etc
always brought along a "come-along" (hand winch) and a home-made Ice Anchor to handle crack troubles
2"x2"x 30"L iron angle + 1/2" eyebolt ( one in the pic was opened after a heavy pull, better use welded/casted ones :laugh3 )

the end rope is for pulling the anchor back up from the hole

这个和我以前做的那个是一样的东西吗?放冰洞了,作为锁定的支点?
怎么感觉比我的长好多啊! :shake :up
eric_gao
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2298
注册: 04 1月 2014 21:11
Member Number (论坛会员注册序列号): #273

Re: [DIY] Ice Anchor for snow machine users

楼层:#5  帖子jasontoronto » 14 3月 2019 16:30

My shelter ice anchor.
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
jasontoronto
Brigadier General (大校/准将)
Brigadier General (大校/准将)
 
帖子: 461
注册: 27 9月 2017 08:13
Member Number (论坛会员注册序列号): #2140

Re: [DIY] Ice Anchor for snow machine users

楼层:#6  帖子Sergeantpepper » 14 3月 2019 16:49

eric_gao @ Thu Mar 14, 2019 3:34 pm 写道:
Sergeantpepper @ 周四 3月 14, 2019 2:10 pm 写道: I used to drive out a lot in the 4Runner a decade ago, off of JP, WB etc
always brought along a "come-along" (hand winch) and a home-made Ice Anchor to handle crack troubles
2"x2"x 30"L iron angle + 1/2" eyebolt ( one in the pic was opened after a heavy pull, better use welded/casted ones :laugh3 )

the end rope is for pulling the anchor back up from the hole

这个和我以前做的那个是一样的东西吗?放冰洞了,作为锁定的支点?
怎么感觉比我的长好多啊! :shake :up


size matters :laugh3 just want bigger ice surface area to share the loading

( 這個是橫放冰洞底用啲呀.....雪狗重300多吧, 如有需要拉它一把脫困啲話,這ice anchor和hand winch派用場呀 )
最后由 Sergeantpepper 编辑于 14 3月 2019 17:43,总共编辑了 2 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: [DIY] Ice Anchor for snow machine users

楼层:#7  帖子Sergeantpepper » 14 3月 2019 17:06

jasontoronto @ Thu Mar 14, 2019 4:30 pm 写道: My shelter ice anchor.

:up
鹅介绍的这个較重型,是给拉受冰洞裂缝所困的車用的
见到你用的那推杆就知那个苦, 可考慮用鋁角造, 會自沉
下面这个也可用鋁角DIY 一炮, 如果经常用一个大小囗径的冰钻则不用造到可调长短的, 简单实用
也跟站长用的血滴子一样, 不用打穿冰洞去配合
要快速见效的可用duct tape 把石头纏在现时橫木上令其自沉可也 :laugh3

phpBB [video]
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: [DIY] Ice Anchor for snow machine users

楼层:#8  帖子eric_gao » 14 3月 2019 19:29

Sergeantpepper @ 周四 3月 14, 2019 5:06 pm 写道:
jasontoronto @ Thu Mar 14, 2019 4:30 pm 写道: My shelter ice anchor.

:up
鹅介绍的这个較重型,是给拉受冰洞裂缝所困的車用的
见到你用的那推杆就知那个苦, 可考慮用鋁角造, 會自沉
下面这个也可用鋁角DIY 一炮, 如果经常用一个大小囗径的冰钻则不用造到可调长短的, 简单实用
也跟站长用的血滴子一样, 不用打穿冰洞去配合
要快速见效的可用duct tape 把石头纏在现时橫木上令其自沉可也 :laugh3

VideoID: https://www.youtube.com/watch?v=KGxUrruKc8w


我做的就是角铝,但是洞不能打穿的那种。不过如果你说要做绞盘用,可能还是你那个穿透,挂住整块冰的够力。

雪狗重270磅左右,各种地形都去过,也去过1尺多厚的松雪,基本没有遇到陷住的情况。

唯一一次陷住,是经过一处,半尺多的slashes,下面都是水。带着两个人和装备没法开出来,但是两个人下来,装备还拖着。

我跟着雪狗走,边走边驱动雪狗,也是轻松的就出来了。

所以我做的ice anchor只是用来固定帐篷的。 :shake :up
eric_gao
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2298
注册: 04 1月 2014 21:11
Member Number (论坛会员注册序列号): #273

Re: [DIY] Ice Anchor for snow machine users

楼层:#9  帖子Sergeantpepper » 14 3月 2019 20:11

eric_gao @ Thu Mar 14, 2019 7:29 pm 写道:
Sergeantpepper @ 周四 3月 14, 2019 5:06 pm 写道:
jasontoronto @ Thu Mar 14, 2019 4:30 pm 写道: My shelter ice anchor.

:up
鹅介绍的这个較重型,是给拉受冰洞裂缝所困的車用的
见到你用的那推杆就知那个苦, 可考慮用鋁角造, 會自沉
下面这个也可用鋁角DIY 一炮, 如果经常用一个大小囗径的冰钻则不用造到可调长短的, 简单实用
也跟站长用的血滴子一样, 不用打穿冰洞去配合
要快速见效的可用duct tape 把石头纏在现时橫木上令其自沉可也 :laugh3

VideoID: https://www.youtube.com/watch?v=KGxUrruKc8w


我做的就是角铝,但是洞不能打穿的那种。不过如果你说要做绞盘用,可能还是你那个穿透,挂住整块冰的够力。

雪狗重270磅左右,各种地形都去过,也去过1尺多厚的松雪,基本没有遇到陷住的情况。

唯一一次陷住,是经过一处,半尺多的slashes,下面都是水。带着两个人和装备没法开出来,但是两个人下来,装备还拖着。

我跟着雪狗走,边走边驱动雪狗,也是轻松的就出来了。

所以我做的ice anchor只是用来固定帐篷的。 :shake :up

:up
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: [DIY] Ice Anchor for snow machine users

楼层:#10  帖子波澜不惊 » 14 3月 2019 23:30

取出来会不会费劲?diy不难
波澜不惊
General (上将)
General (上将)
 
帖子: 5449
注册: 25 5月 2014 06:52
Member Number (论坛会员注册序列号): #487

Re: [DIY] Ice Anchor for snow machine users

楼层:#11  帖子Sergeantpepper » 15 3月 2019 10:58

波澜不惊 @ Thu Mar 14, 2019 11:30 pm 写道: 取出来会不会费劲?diy不难

见视频0:43, 从近帳蓬那头高端向上輕易拉出
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: [DIY] Ice Anchor for snow machine users

楼层:#12  帖子波澜不惊 » 15 3月 2019 11:53

Sergeantpepper @ 周五 3月 15, 2019 10:58 am 写道:
波澜不惊 @ Thu Mar 14, 2019 11:30 pm 写道: 取出来会不会费劲?diy不难

见视频0:43, 从近帳蓬那头高端向上輕易拉出

冻住后不易,所以视频中可以收缩,就没这问题了
波澜不惊
General (上将)
General (上将)
 
帖子: 5449
注册: 25 5月 2014 06:52
Member Number (论坛会员注册序列号): #487

Re: [DIY] Ice Anchor for snow machine users

楼层:#13  帖子Sergeantpepper » 15 3月 2019 12:09

波澜不惊 @ Fri Mar 15, 2019 11:53 am 写道:
Sergeantpepper @ 周五 3月 15, 2019 10:58 am 写道:
波澜不惊 @ Thu Mar 14, 2019 11:30 pm 写道: 取出来会不会费劲?diy不难

见视频0:43, 从近帳蓬那头高端向上輕易拉出

冻住后不易,所以视频中可以收缩,就没这问题了

没碰水那會冰着
不見#8 eric 正用着此物嗎?
可收缩是要配合不同大小冰洞使用者, Gracier那是个商品, 不是DIY
站长使用的血滴子工作概念與此物相若, 但也不见他有冰着的麻烦

Fabrill 也有個類似啲東東
https://www.ebay.com/p/Frabill-1645-Ice-Shanty-Shelter-Anchor-Kit/21012046997?iid=331718193659
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6


回到 It's All About Fishin' 钓鱼!

在线用户