Canoe stabilizer DIY 完工了!

自己动手, 丰衣足食

Canoe stabilizer DIY 完工了!

楼层:#1  帖子steve » 26 5月 2015 12:53

历时N天,材料费less than 100,欢迎交流和建议。如需要细节,会如实答复。
材料:PVC 1' pipe 一整根,PVC 1/2 pipe 少许,小fittings如图。PVC 1’ 横梁内置木棒,加强抗弯,端口用泡沫封住防水;PVC 1/2' 管内置铝管,加强抗弯。
WP_000864.jpg
WP_000861.jpg
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
steve
Major General (少将)
Major General (少将)
 
帖子: 771
注册: 10 3月 2014 23:02
Member Number (论坛会员注册序列号): #330

Re: Canoe stabilizer DIY 完工了!

楼层:#2  帖子大洲 » 26 5月 2015 12:57

这动手能力简直令人发指! :brv
大洲
Major General (少将)
Major General (少将)
 
帖子: 1186
注册: 25 7月 2014 23:08
Member Number (论坛会员注册序列号): #678

Re: Canoe stabilizer DIY 完工了!

楼层:#3  帖子sunfish123 » 26 5月 2015 13:04

好手欲
sunfish123
General (上将)
General (上将)
 
帖子: 7883
注册: 08 12月 2014 21:10
Member Number (论坛会员注册序列号): #896
地址: Dufferin Rutherford

Re: Canoe stabilizer DIY 完工了!

楼层:#4  帖子河上笑 » 26 5月 2015 13:09

牛B,恭喜啊,可以出战江湖了。 :yes :yes :yes
这些PVC的材料在哪里找到的?我曾经去HD还有LOWES找PVC管材和配件,找不全啊。 :feed
河上笑
General (上将)
General (上将)
 
帖子: 7400
注册: 10 9月 2014 17:59
Member Number (论坛会员注册序列号): #787
地址: Markham, Ontario

Re: Canoe stabilizer DIY 完工了!

楼层:#5  帖子wetnose » 26 5月 2015 13:09

steve 写道:历时N天,材料费less than 100,欢迎交流和建议。如需要细节,会如实答复。
材料:PVC 1' pipe 一整根,PVC 1/2 pipe 少许,小fittings如图。PVC 1’ 横梁内置木棒,加强抗弯,端口用泡沫封住防水;PVC 1/2' 管内置铝管,加强抗弯。
WP_000864.jpg
WP_000861.jpg

Steve还有这手艺?甩我不知道多少条街! :up :up :up
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: Canoe stabilizer DIY 完工了!

楼层:#6  帖子Sergeantpepper » 26 5月 2015 13:13

Great job! :yes
But I believe cross lock pins have to be added to the lock nuts(quick coupling) of the Tee, or the framework will shatter in the rough.....the construction idea is good for easy dismantling, but that should be of lower priority
最后由 Sergeantpepper 编辑于 26 5月 2015 15:24,总共编辑了 1 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: Canoe stabilizer DIY 完工了!

楼层:#7  帖子Pungo » 26 5月 2015 13:14

好手艺!
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: Canoe stabilizer DIY 完工了!

楼层:#8  帖子millermin » 26 5月 2015 13:32

浮力购吗?
millermin
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2340
注册: 14 7月 2014 11:14
Member Number (论坛会员注册序列号): #641
地址: Bronte Creek, Burlington

Re: Canoe stabilizer DIY 完工了!

楼层:#9  帖子xiaolu » 26 5月 2015 13:42

steve 写道:历时N天,材料费less than 100,欢迎交流和建议。如需要细节,会如实答复。
材料:PVC 1' pipe 一整根,PVC 1/2 pipe 少许,小fittings如图。PVC 1’ 横梁内置木棒,加强抗弯,端口用泡沫封住防水;PVC 1/2' 管内置铝管,加强抗弯。
WP_000864.jpg
WP_000861.jpg

牛鼻. 介回 steve 也有望 BBP 钓大 LAKER 喽! :up :laugh3
xiaolu
Site Admin (站长)
 
帖子: 42626
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: Canoe stabilizer DIY 完工了!

楼层:#10  帖子wenxiuxuan » 26 5月 2015 13:59

挺好的,可是怎么固定在Kayak上?
wenxiuxuan
General (上将)
General (上将)
 
帖子: 10048
注册: 17 9月 2013 08:03
Member Number (论坛会员注册序列号): #3
地址: Richmond Hill

Re: Canoe stabilizer DIY 完工了!

楼层:#11  帖子xiaolu » 26 5月 2015 14:15

wenxiuxuan 写道:挺好的,可是怎么固定在Kayak上?

从主题贴的标题上看, 貌似要固定在"可怒"上, 据说比固定在 KAYAK 上要更容易方便一些则个.
xiaolu
Site Admin (站长)
 
帖子: 42626
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: Canoe stabilizer DIY 完工了!

楼层:#12  帖子john8848 » 26 5月 2015 16:50

Superb!!!!
:up :up :up
john8848
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3762
注册: 30 10月 2013 20:44
Member Number (论坛会员注册序列号): #155
地址: Taunton & Brock, Whitby

Re: Canoe stabilizer DIY 完工了!

楼层:#13  帖子HKMAN » 26 5月 2015 17:37

可能浮力不足
HKMAN
Second Lieutenant (少尉)
 
帖子: 15
注册: 17 9月 2013 15:27
Member Number (论坛会员注册序列号): #16

Re: Canoe stabilizer DIY 完工了!

楼层:#14  帖子Sergeantpepper » 26 5月 2015 18:16

浮力要求由零开始,豐儉由人、、
最后由 Sergeantpepper 编辑于 26 5月 2015 18:31,总共编辑了 2 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: Canoe stabilizer DIY 完工了!

楼层:#15  帖子endeavor » 26 5月 2015 18:23

F浮筒那里买的 看起来不错 gānjue多jìa几个hāo
endeavor
Colonel (上校)
 
帖子: 136
注册: 06 11月 2014 04:56
Member Number (论坛会员注册序列号): #875
地址: Edmonton, Alberta

Re: Canoe stabilizer DIY 完工了!

楼层:#16  帖子jackx2006 » 26 5月 2015 18:30

:up
jackx2006
Major General (少将)
Major General (少将)
 
帖子: 1086
注册: 19 4月 2015 17:22
Member Number (论坛会员注册序列号): #1050

Re: Canoe stabilizer DIY 完工了!

楼层:#17  帖子Sergeantpepper » 26 5月 2015 20:10

endeavor 写道:F浮筒那里买的 看起来不错 gānjue多jìa几个hāo



http://www.easternmarine.com/Crabbing-Floats-Buoys/

浮力参攷: 1 cu ft 排水 => 62·4 lbs 浮力
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: Canoe stabilizer DIY 完工了!

楼层:#18  帖子白雪丹枫 » 26 5月 2015 20:44

:up :up :up :yes :yes :yes :yes
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14857
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: Canoe stabilizer DIY 完工了!

楼层:#19  帖子steve » 26 5月 2015 21:38

大洲 写道:这动手能力简直令人发指! :brv

过奖了,和大侠们没法比。
steve
Major General (少将)
Major General (少将)
 
帖子: 771
注册: 10 3月 2014 23:02
Member Number (论坛会员注册序列号): #330

Re: Canoe stabilizer DIY 完工了!

楼层:#20  帖子steve » 26 5月 2015 21:39

sunfish123 写道:好手欲

谢谢,献丑了。
steve
Major General (少将)
Major General (少将)
 
帖子: 771
注册: 10 3月 2014 23:02
Member Number (论坛会员注册序列号): #330

Re: Canoe stabilizer DIY 完工了!

楼层:#21  帖子steve » 26 5月 2015 21:47

河上笑 写道:牛B,恭喜啊,可以出战江湖了。 :yes :yes :yes
这些PVC的材料在哪里找到的?我曾经去HD还有LOWES找PVC管材和配件,找不全啊。 :feed

还要把这个东西绑定在船上,还有活儿尼。
HD的PVC不全,跑了不止几个店;最后在Lowes买到大多数,小的在RONA搞定。RONA也跑了几个店,一个店员说要到大的RONA,我才搞清楚,RONA还有大小之分。
steve
Major General (少将)
Major General (少将)
 
帖子: 771
注册: 10 3月 2014 23:02
Member Number (论坛会员注册序列号): #330

Re: Canoe stabilizer DIY 完工了!

楼层:#22  帖子steve » 26 5月 2015 21:48

wetnose 写道:
steve 写道:历时N天,材料费less than 100,欢迎交流和建议。如需要细节,会如实答复。
材料:PVC 1' pipe 一整根,PVC 1/2 pipe 少许,小fittings如图。PVC 1’ 横梁内置木棒,加强抗弯,端口用泡沫封住防水;PVC 1/2' 管内置铝管,加强抗弯。
WP_000864.jpg
WP_000861.jpg

Steve还有这手艺?甩我不知道多少条街! :up :up :up

不敢不敢,能和湿鼻PK,还远着呢。
steve
Major General (少将)
Major General (少将)
 
帖子: 771
注册: 10 3月 2014 23:02
Member Number (论坛会员注册序列号): #330

Re: Canoe stabilizer DIY 完工了!

楼层:#23  帖子steve » 26 5月 2015 21:50

Sergeantpepper 写道:Great job! :yes
But I believe cross lock pins have to be added to the lock nuts(quick coupling) of the Tee, or the framework will shatter in the rough.....the construction idea is good for easy dismantling, but that should be of lower priority

遇到师傅了,此话有理!
steve
Major General (少将)
Major General (少将)
 
帖子: 771
注册: 10 3月 2014 23:02
Member Number (论坛会员注册序列号): #330

Re: Canoe stabilizer DIY 完工了!

楼层:#24  帖子steve » 26 5月 2015 21:50

胖Pungo狗 写道:好手艺!

谢谢!班门弄斧了!
steve
Major General (少将)
Major General (少将)
 
帖子: 771
注册: 10 3月 2014 23:02
Member Number (论坛会员注册序列号): #330

Re: Canoe stabilizer DIY 完工了!

楼层:#25  帖子steve » 26 5月 2015 21:52

millermin 写道:浮力购吗?

看到别人加的四个,估计还成。力臂长,扭矩大。试验后在说。不行的话,再搞一组。
steve
Major General (少将)
Major General (少将)
 
帖子: 771
注册: 10 3月 2014 23:02
Member Number (论坛会员注册序列号): #330

下一页

回到 DIY & 日常问题解答

在线用户

cron