hi,大家好,想找几位钓友测试下探头支架,船钓

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#51  帖子xiaolu » 30 6月 2020 10:36

我还没有敢订一个, 就是担心貌似有些螺丝螺母等是否是这里的通常的尺寸, 还有因为没有可以直接插入这里的通用的标准的 SCOTTY 和 KAYAK 自带的 GEAR TRACK 槽里
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
xiaolu
Site Admin (站长)
 
帖子: 42626
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#52  帖子Beeknight » 30 6月 2020 10:46

我的也到货了。

1、3 x suction cups需要比较大的光滑表面安装。我的kayak deck较狭窄,且平滑表面很有限,无法安装在身体前方(我目前setup的位置,方便在水上收放、调整角度)。船体外侧也无法安装。目测只有座位后有一块地方够大,但是装那里的话flex arm有可能会跟stabilizer打架;transducer入水深度也会欠一些。可以用螺丝固定底座,但暂时还没打算再多在kayak上打洞。 :laugh3
IMG_3902.JPG


2、Flex arm末端的螺丝比Lowrance transducer原配的要细不少,transducer装上后恐怕不能固定其入水角度,这比较麻烦。
IMG_3906.JPG


3、180° Rotating Bracket容易松动/转动。Bracket与suction cups底座间也只有一根螺丝相连,同样有转动的问题。
IMG_3903.JPG
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#53  帖子Beeknight » 30 6月 2020 10:50

xiaolu @ 周二 6月 30, 2020 10:36 am 写道: 我还没有敢订一个, 就是担心貌似有些螺丝螺母等是否是这里的通常的尺寸, 还有因为没有可以直接插入这里的通用的标准的 SCOTTY 和 KAYAK 自带的 GEAR TRACK 槽里


:shake 的确,如果那flexible arm能直接安在gear track里(或者与gear head能相匹配)且安装transducer的螺丝是通常尺寸,我上周末就安上了。
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#54  帖子Sergeantpepper » 30 6月 2020 10:52

johndxu @ Tue Jun 30, 2020 10:26 am 写道:
Sergeantpepper @ 30 6月 2020 09:40 写道: 1。说明书上1/5 inch male screw, 原来是 M5 male screw。

何解又英制又公制呀 :laugh3 。。。一器两制乎
1” = 25.4 mm
1/5" = 5.08 mm
3/16"= 4.76 mm

會否是 3/16“ 誤以為是 5mm ? 故寫作1/5" ?

M5 有两种 pitch, 0.5 和 0.8 .... 量量看

又英制又公制看起来是不太专业,不过可能是因为要适应北美的市场而改成 1/4“的。也很容易改,只要在塑料件上压进一个螺母。
M5 的罗纹证实过的,用M5的螺帽轻松拧进,螺距很可能是常用的0.8,而不是细牙。


說明書上列明的1/4 ” 和1/5" 两口罗絲都是跟原厂零件相配的,尺寸大小本耒跟用者不太相干,无必要列明,既要列明就得正道一点,1/5” 实在是贻笑大方了。。。
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#55  帖子Sergeantpepper » 30 6月 2020 11:12

transducer装上后恐怕不能固定其入水角度,这比较麻烦。

share one of the two white rubber washers, if allowed, add it to the interface between your ducer head and the head mounting bracket.....this should do it
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#56  帖子Beeknight » 30 6月 2020 11:54

Sergeantpepper @ 周二 6月 30, 2020 11:12 am 写道: transducer装上后恐怕不能固定其入水角度,这比较麻烦。

share one of the two white rubber washers, if allowed, add it to the interface between your ducer head and the head mounting bracket.....this should do it

:shake :shake
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#57  帖子johndxu » 04 7月 2020 06:59

johndxu @ 30 6月 2020 08:51 写道:
johndxu @ 30 6月 2020 08:23 写道:
johndxu @ 23 6月 2020 07:59 写道:

不错, 不错。

1。说明书上1/5 inch male screw 显然是写错了。
2。Adapter 如果只是中间一个1/4“的螺丝固定,会不会松动,转动?
3。Mounting Arm 最好附带些Clip,可以Manage FF的 Cable.
4. 因为 那个Flexible Arm 而不是硬连接,在行船中FF会不会移位?
5。那个 double sided 连接没看出来是怎样的。
6。如果塑料船比如Kayak用吸盘固定应该只需要很短的Extended Arm,甚至不需要Extended Arm,因为在水面以下吸盘的固定更稳固。
7。说明书上说在任何船上安装都不需要钻孔是不是有点夸张了?不是每种船体的材料都适合吸盘的。


:up 探头支架已到货,比较快。目测还没下水:
1。说明书上1/5 inch male screw, 原来是 M5 male screw。
2. Adapter 中间一个1/4“的螺丝固定,不会松动。但是如果把支架放在船的左边,因为螺纹的方向关系有待水上实测。
3。ManageFF Cable 可以用 尼龙索帶
4。Flexible Arm (软蛇)非常刚,与我以前在国内见过的完全不一样。
5。Double Sided 原来是指那两片红色的双面胶。
6。T-Nut 的固定方法目测可行,前提是T-Nut必须是1/4 in Thread 和适当的长度。
7。和探头连接处用的是 M4 螺栓,和这里用的1/4 in 不一样,需要配合这里的市场。
8。Adapter 和 Bracket 的连接腿的刚度和连接的刚度需要改进。

9. 因为有那两片红色的双面胶, 所以理论上可以用在任何船上不用钻孔,这一点没有夸张。
10 . 可以利用其中的零件再加一个T槽螺母,实现装配在Kayak的gear track中,见图。但要在说明书中图示如可安装,不要想象每个用户都有足够的智慧。
11. 那个连接探头和蛇管的接头需要加强,并改成1/4“的孔来配合这里的探头,这零件的两侧平面本来就有打毛, 见图。
12. 两个硅胶垫圈看来是要用作Spacer的,要想办法移除或用钢质Spacer来代替。柔性的Spacer会让连接变成非刚性。而在这个位置上任何连接上的变位都会放大到尾端上的探头上去。图中我用一个螺母代替了那两个硅胶垫圈。
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#58  帖子johndxu » 04 7月 2020 09:50

Sergeantpepper @ 30 6月 2020 10:52 写道:
johndxu @ Tue Jun 30, 2020 10:26 am 写道:
Sergeantpepper @ 30 6月 2020 09:40 写道: 1。说明书上1/5 inch male screw, 原来是 M5 male screw。

何解又英制又公制呀 :laugh3 。。。一器两制乎
1” = 25.4 mm
1/5" = 5.08 mm
3/16"= 4.76 mm

會否是 3/16“ 誤以為是 5mm ? 故寫作1/5" ?

M5 有两种 pitch, 0.5 和 0.8 .... 量量看

又英制又公制看起来是不太专业,不过可能是因为要适应北美的市场而改成 1/4“的。也很容易改,只要在塑料件上压进一个螺母。
M5 的罗纹证实过的,用M5的螺帽轻松拧进,螺距很可能是常用的0.8,而不是细牙。


說明書上列明的1/4 ” 和1/5" 两口罗絲都是跟原厂零件相配的,尺寸大小本耒跟用者不太相干,无必要列明,既要列明就得正道一点,1/5” 实在是贻笑大方了。。。

你在这里打脸Michael,Michael回去要骂小姑娘了。 :laugh3
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#59  帖子Sergeantpepper » 04 7月 2020 13:38

check #55
"share one of the two white rubber washers, if allowed, add it to the interface between your ducer head and the head mounting bracket.....this should do it"

transducer和 mounting end bracket, 他們啲serrations都不一樣, 難起locking作用, 其中加片silicone rubber washer能起到spring washer啲 locking作用, 要作angular微調時也不用鬆螺絲, 但仍然起到adjust & stay 啲作用...
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#60  帖子Sergeantpepper » 04 7月 2020 13:47

原來還有夥 wing-nut

图片
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#61  帖子johndxu » 05 7月 2020 15:04

想找一块材料做一个零件 搜索了我所有的库存都没有啊
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#62  帖子johndxu » 05 7月 2020 15:09

Homedepot一个一个看过去也没有 再逛dollarmart, 以前看到鹅喜欢的高密度塑料菜板也没货了。 最后看到一个东西也许可用$2。鹅 真的喜欢dollarmart, 为了这块材料 我已经走过一遍了这次是第2次
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#63  帖子johndxu » 05 7月 2020 15:38

虽然这块材料没有像高密度 PE 那么硬朗 可能也是一般密度的PE 但是凑合一下也能用了。
经过手工锯,锉,钻和攻丝就变成酱子了。手工活有点粗糙,但是可以用了,再加一个钢螺栓增加链接的刚性。
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#64  帖子johndxu » 05 7月 2020 15:48

把探头装上试试还不错 Cable线也绑上去
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#65  帖子johndxu » 05 7月 2020 16:05

T槽固定做的简单粗暴 增加一个T槽螺母,两个钢质垫圈, 省略了其他零件。
最后是酱紫的:
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#66  帖子johndxu » 05 7月 2020 16:10

当然也可以用原来的零件, 其中的螺栓也是原来就有的 只是增加了一个T槽螺母。
最后是酿紫的:
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
最后由 johndxu 编辑于 05 7月 2020 16:52,总共编辑了 1 次
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#67  帖子johndxu » 05 7月 2020 16:13

现在终于能試水了。
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#68  帖子Sergeantpepper » 05 7月 2020 16:50

看不出如何把T上緊在track 上
把軟蛇在空中大旋转? :fishb
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#69  帖子johndxu » 05 7月 2020 16:54

Sergeantpepper @ 05 7月 2020 16:50 写道: 看不出如何把T上緊在track 上
把軟蛇在空中大旋转? :fishb

正是这样的 :laugh3 :shake
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#70  帖子johndxu » 05 7月 2020 16:55

johndxu @ 05 7月 2020 16:54 写道:
Sergeantpepper @ 05 7月 2020 16:50 写道: 看不出如何把T上緊在track 上
把軟蛇在空中大旋转? :fishb

正是这样的 :laugh3 :shake

然后再把探头连Cable一起在空中大旋转 :roflmao
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#71  帖子Beeknight » 05 7月 2020 20:24

johndxu @ 周日 7月 05, 2020 4:10 pm 写道: 当然也可以用原来的零件, 其中的螺栓也是原来就有的 只是增加了一个T槽螺母。
最后是酿紫的:

真不错!我可以copy吗? :laugh3 :roflmao
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#72  帖子johndxu » 05 7月 2020 20:48

Beeknight @ 05 7月 2020 20:24 写道:
johndxu @ 周日 7月 05, 2020 4:10 pm 写道: 当然也可以用原来的零件, 其中的螺栓也是原来就有的 只是增加了一个T槽螺母。
最后是酿紫的:

真不错!我可以copy吗? :laugh3 :roflmao

当然,欢迎 :shake
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#73  帖子Sergeantpepper » 05 7月 2020 20:56

Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#74  帖子johndxu » 05 7月 2020 21:49

Sergeantpepper @ 05 7月 2020 20:56 写道: https://www.leevalley.com/en-ca/shop/hardware/jig-and-fixture-parts/110734-1-4-20-t-slot-nuts

...or ask John to share 1 :laugh3

我用得正好剩下最后一个让我给用上了,也不是1/4“的是M6的,我自己攻了一下1/4”的Thread。
用一个的话就不要买了,自己做一个也很容易。我的T-Nut 还没到货时就是自己做了6个,但是因为没有找到相当的材料,不够厚,比较弱。临时用用可以。
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#75  帖子johndxu » 07 7月 2020 22:35

可惜了,差一点点没进水。
装上原来那些零件是可以入水的,但是那些零件有些弱。
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

上一页下一页

回到 It's All About Fishin' 钓鱼!

在线用户

cron