hi,大家好,想找几位钓友测试下探头支架,船钓

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#26  帖子johndxu » 23 6月 2020 22:51

michael1982 @ 23 6月 2020 11:46 写道:
xiaolu @ 23 6月 2020 11:02 写道:
michael1982 @ Tue Jun 23, 2020 10:15 am 写道:

版主,我想拿出10套,给大家测试和试用,免费的,以帮助我们改进,亚马逊直接配送,但是试用后需要给我们feedback 和 产品测试评价,

不知道是否可行 ?

当然可行。亚马逊 (amazon.ca) 的直接配送(或者说网购)具体的产品的网购链接网址是?


有需要的可以报名,直接amazon.ca .搜索 “LUCKY Fish Finder Transducer Mount Arm” 在首页直接购买即可,试用后,联系我, :shake

也order一个。
那个1/5英寸的罗纹真的是没见过,有的话啃腚不是Standard的。 :shake
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#27  帖子michael1982 » 23 6月 2020 22:57

eric_gao @ 23 6月 2020 22:27 写道:
michael1982 @ 周二 6月 23, 2020 10:23 pm 写道:
xiaolu @ 23 6月 2020 12:20 写道: 好个。 鹅也来一个试试。



站长,你那个卡槽的那个,你研究下,我配上什么配件可以解决你们的问题,我们后期增加这个配件,


只要知道卡槽的尺寸,加个 T nuts应该就可以放倒卡槽里。 :shake :up

最下面的链接部分,可以做几家大厂家 H鸟 老乱死 Garmin探头的接口。
要是能加入LiveScope探头的mount那是更好了,那对K当扫荡酱爆perch是相当有帮助的。


这个能给我一下实物和尺寸吗?这个对于一个不会钓鱼的人去理解这个,很困难的 :verysad
michael1982
Major (少校)
 
帖子: 60
注册: 18 1月 2020 23:59
Member Number (论坛会员注册序列号): #2770

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#28  帖子eric_gao » 23 6月 2020 23:22

michael1982 @ 周二 6月 23, 2020 10:57 pm 写道:
eric_gao @ 23 6月 2020 22:27 写道:
michael1982 @ 周二 6月 23, 2020 10:23 pm 写道:


站长,你那个卡槽的那个,你研究下,我配上什么配件可以解决你们的问题,我们后期增加这个配件,


只要知道卡槽的尺寸,加个 T nuts应该就可以放倒卡槽里。 :shake :up

最下面的链接部分,可以做几家大厂家 H鸟 老乱死 Garmin探头的接口。
要是能加入LiveScope探头的mount那是更好了,那对K当扫荡酱爆perch是相当有帮助的。


这个能给我一下实物和尺寸吗?这个对于一个不会钓鱼的人去理解这个,很困难的 :verysad


T nuts就是图一红圈里的那个,具体尺寸看图二红框里的。
那样就能卡到槽里了,防锈要保证,不然长碰水,锈了就不好了。
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
eric_gao
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2298
注册: 04 1月 2014 21:11
Member Number (论坛会员注册序列号): #273

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#29  帖子Beeknight » 24 6月 2020 10:33

michael1982 @ 周二 6月 23, 2020 10:11 pm 写道:
Beeknight @ 23 6月 2020 12:00 写道: 谢谢楼主,我想试试看。 :up

我跟站长的set up一样,在湖上调整transducer角度挺费劲的。用Flexible Arm应该会方便不少。但是把探头跟那个arm的末端连接上会需要自备些硬件。


直接下单就可以,然后私信我订单号,我备注


:shake 多谢,已私信
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#30  帖子白雪丹枫 » 24 6月 2020 17:24

我原来有个自己做的去年秋天去Kawarha Highlands时搞丢到湖里了,正需要一个。 :up

想请问一下有多重。 :shake 我去back country时带球球探鱼器用,太重不好。 :feed
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14857
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#31  帖子白雪丹枫 » 24 6月 2020 17:28

johndxu @ 周二 6月 23, 2020 10:51 pm 写道:
michael1982 @ 23 6月 2020 11:46 写道:
xiaolu @ 23 6月 2020 11:02 写道:
当然可行。亚马逊 (amazon.ca) 的直接配送(或者说网购)具体的产品的网购链接网址是?


有需要的可以报名,直接amazon.ca .搜索 “LUCKY Fish Finder Transducer Mount Arm” 在首页直接购买即可,试用后,联系我, :shake

也order一个。
那个1/5英寸的罗纹真的是没见过,有的话啃腚不是Standard的。 :shake


应该是1/4螺纹。没听说过有1/5的螺纹,难道楼主想学苹果? :laugh3
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14857
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#32  帖子Sergeantpepper » 24 6月 2020 21:16

johndxu @ Tue Jun 23, 2020 10:51 pm 写道:
michael1982 @ 23 6月 2020 11:46 写道:
xiaolu @ 23 6月 2020 11:02 写道:
当然可行。亚马逊 (amazon.ca) 的直接配送(或者说网购)具体的产品的网购链接网址是?


有需要的可以报名,直接amazon.ca .搜索 “LUCKY Fish Finder Transducer Mount Arm” 在首页直接购买即可,试用后,联系我, :shake

也order一个。
那个1/5英寸的罗纹真的是没见过,有的话啃腚不是Standard的。 :shake


when comparing the size difference between the two screws, 1/5 should read as 1/8
....bad hand writing wrongly interpreted i'd guess, professionals will always complete figure'8' with two circles :laugh3
and ahhh all screws are male, so there's no need to specify its gender....
====================================================================
better alternatives...
3. Rubber-----> Rubber Sheath
4. Metal Stick-----> Flexible metal shaft/core
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
最后由 Sergeantpepper 编辑于 24 6月 2020 22:04,总共编辑了 1 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#33  帖子johndxu » 24 6月 2020 21:43

Sergeantpepper @ 24 6月 2020 21:16 写道:
johndxu @ Tue Jun 23, 2020 10:51 pm 写道:
michael1982 @ 23 6月 2020 11:46 写道:

有需要的可以报名,直接amazon.ca .搜索 “LUCKY Fish Finder Transducer Mount Arm” 在首页直接购买即可,试用后,联系我, :shake

也order一个。
那个1/5英寸的罗纹真的是没见过,有的话啃腚不是Standard的。 :shake


when comparing the size difference between the two screws, 1/5 should read as 1/8
....bad hand writing wrongly interpreted i'd guess, professionals will always complete figure'8' with two circles :laugh3
and ahhh all screws are male, so there's no need to specify its gender....

:up 还真是,看上去那两个螺丝不一样大小的。一分的螺丝很细啊。
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#34  帖子Sergeantpepper » 24 6月 2020 21:51

If current USERs of similar transducer arms can provide " through hole " size reference for Lz to consider will be great....just a thought
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#35  帖子Sergeantpepper » 24 6月 2020 22:16

johndxu @ Wed Jun 24, 2020 9:43 pm 写道:
Sergeantpepper @ 24 6月 2020 21:16 写道:
johndxu @ Tue Jun 23, 2020 10:51 pm 写道:
也order一个。
那个1/5英寸的罗纹真的是没见过,有的话啃腚不是Standard的。 :shake


when comparing the size difference between the two screws, 1/5 should read as 1/8
....bad hand writing wrongly interpreted i'd guess, professionals will always complete figure'8' with two circles :laugh3
and ahhh all screws are male, so there's no need to specify its gender....

:up 还真是,看上去那两个螺丝不一样大小的。一分的螺丝很细啊


thin & short...OMG :laugh3
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#36  帖子Sergeantpepper » 25 6月 2020 10:00

~~~个人觉得那个180* feature 較合硬臂設計用, 軟臂的自己可以扭腰呀
~~~这类活动鉸鏈, 需要类似slide discs 那样的橡胶配件去增加磨擦力以便定位, 就算是用普通橡胶垫片也好过光着,硬打硬容易溜
(應當叫anti-slide disc才對吧 :))
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#37  帖子michael1982 » 25 6月 2020 20:48

eric_gao @ 23 6月 2020 23:22 写道:
michael1982 @ 周二 6月 23, 2020 10:57 pm 写道:
eric_gao @ 23 6月 2020 22:27 写道:

只要知道卡槽的尺寸,加个 T nuts应该就可以放倒卡槽里。 :shake :up

最下面的链接部分,可以做几家大厂家 H鸟 老乱死 Garmin探头的接口。
要是能加入LiveScope探头的mount那是更好了,那对K当扫荡酱爆perch是相当有帮助的。


这个能给我一下实物和尺寸吗?这个对于一个不会钓鱼的人去理解这个,很困难的 :verysad


T nuts就是图一红圈里的那个,具体尺寸看图二红框里的。
那样就能卡到槽里了,防锈要保证,不然长碰水,锈了就不好了。


非常感谢,这个配件应该可以解决的
michael1982
Major (少校)
 
帖子: 60
注册: 18 1月 2020 23:59
Member Number (论坛会员注册序列号): #2770

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#38  帖子michael1982 » 25 6月 2020 20:50

Sergeantpepper @ 25 6月 2020 10:00 写道: ~~~个人觉得那个180* feature 較合硬臂設計用, 軟臂的自己可以扭腰呀
~~~这类活动鉸鏈, 需要类似slide discs 那样的橡胶配件去增加磨擦力以便定位, 就算是用普通橡胶垫片也好过光着,硬打硬容易溜
(應當叫anti-slide disc才對吧 :))


非常感谢,我找技术看下怎么处理
michael1982
Major (少校)
 
帖子: 60
注册: 18 1月 2020 23:59
Member Number (论坛会员注册序列号): #2770

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#39  帖子michael1982 » 25 6月 2020 20:51

Sergeantpepper @ 24 6月 2020 21:16 写道:
johndxu @ Tue Jun 23, 2020 10:51 pm 写道:
michael1982 @ 23 6月 2020 11:46 写道:

有需要的可以报名,直接amazon.ca .搜索 “LUCKY Fish Finder Transducer Mount Arm” 在首页直接购买即可,试用后,联系我, :shake

也order一个。
那个1/5英寸的罗纹真的是没见过,有的话啃腚不是Standard的。 :shake


when comparing the size difference between the two screws, 1/5 should read as 1/8
....bad hand writing wrongly interpreted i'd guess, professionals will always complete figure'8' with two circles :laugh3
and ahhh all screws are male, so there's no need to specify its gender....
====================================================================
better alternatives...
3. Rubber-----> Rubber Sheath
4. Metal Stick-----> Flexible metal shaft/core


文案是个小姑娘,在内陆长大,都没见过海 :laugh3
michael1982
Major (少校)
 
帖子: 60
注册: 18 1月 2020 23:59
Member Number (论坛会员注册序列号): #2770

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#40  帖子michael1982 » 25 6月 2020 20:52

白雪丹枫 @ 24 6月 2020 17:28 写道:
johndxu @ 周二 6月 23, 2020 10:51 pm 写道:
michael1982 @ 23 6月 2020 11:46 写道:

有需要的可以报名,直接amazon.ca .搜索 “LUCKY Fish Finder Transducer Mount Arm” 在首页直接购买即可,试用后,联系我, :shake

也order一个。
那个1/5英寸的罗纹真的是没见过,有的话啃腚不是Standard的。 :shake


应该是1/4螺纹。没听说过有1/5的螺纹,难道楼主想学苹果? :laugh3



哈哈,我自己都搞不清楚,先试用,然后拿到后去使劲蹂躏,一个产品经不起你们的摧残,一定不是好产品 :roflmao
michael1982
Major (少校)
 
帖子: 60
注册: 18 1月 2020 23:59
Member Number (论坛会员注册序列号): #2770

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#41  帖子michael1982 » 25 6月 2020 20:54

白雪丹枫 @ 24 6月 2020 17:24 写道: 我原来有个自己做的去年秋天去Kawarha Highlands时搞丢到湖里了,正需要一个。 :up

想请问一下有多重。 :shake 我去back country时带球球探鱼器用,太重不好。 :feed


整套在0.7KG 左右,需要就拿一个去,看看和之前的是否匹配,我跟公司申请了10套,让大家去测试
michael1982
Major (少校)
 
帖子: 60
注册: 18 1月 2020 23:59
Member Number (论坛会员注册序列号): #2770

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#42  帖子johndxu » 25 6月 2020 21:49

michael1982 @ 25 6月 2020 20:51 写道:
Sergeantpepper @ 24 6月 2020 21:16 写道:
johndxu @ Tue Jun 23, 2020 10:51 pm 写道:
也order一个。
那个1/5英寸的罗纹真的是没见过,有的话啃腚不是Standard的。 :shake


when comparing the size difference between the two screws, 1/5 should read as 1/8
....bad hand writing wrongly interpreted i'd guess, professionals will always complete figure'8' with two circles :laugh3
and ahhh all screws are male, so there's no need to specify its gender....
====================================================================
better alternatives...
3. Rubber-----> Rubber Sheath
4. Metal Stick-----> Flexible metal shaft/core


文案是个小姑娘,在内陆长大,都没见过海 :laugh3

小姑娘有没有上Amason,也可订购?有的话也可以申请十套 :roflmao
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#43  帖子白雪丹枫 » 26 6月 2020 00:39

michael1982 @ 周四 6月 25, 2020 8:54 pm 写道:
白雪丹枫 @ 24 6月 2020 17:24 写道: 我原来有个自己做的去年秋天去Kawarha Highlands时搞丢到湖里了,正需要一个。 :up

想请问一下有多重。 :shake 我去back country时带球球探鱼器用,太重不好。 :feed


整套在0.7KG 左右,需要就拿一个去,看看和之前的是否匹配,我跟公司申请了10套,让大家去测试


非常感谢! :shake 不过对我来说太重了,我还是自己弄一个吧!
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14857
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#44  帖子michael1982 » 26 6月 2020 20:46

johndxu @ 25 6月 2020 21:49 写道:
michael1982 @ 25 6月 2020 20:51 写道:
Sergeantpepper @ 24 6月 2020 21:16 写道:

when comparing the size difference between the two screws, 1/5 should read as 1/8
....bad hand writing wrongly interpreted i'd guess, professionals will always complete figure'8' with two circles :laugh3
and ahhh all screws are male, so there's no need to specify its gender....
====================================================================
better alternatives...
3. Rubber-----> Rubber Sheath
4. Metal Stick-----> Flexible metal shaft/core


文案是个小姑娘,在内陆长大,都没见过海 :laugh3

小姑娘有没有上Amason,也可订购?有的话也可以申请十套 :roflmao


哈哈,钓鱼的都是寒江孤叶,一叶飘舟的,小姑娘受不了啊 :laugh3
michael1982
Major (少校)
 
帖子: 60
注册: 18 1月 2020 23:59
Member Number (论坛会员注册序列号): #2770

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#45  帖子吃瓜群众 » 28 6月 2020 14:44

给楼主一个建议:这种橡皮艇下水辅助设备好像需求量蛮大,可以作为一个产品。
https://youtu.be/pi_JB5EjffY

不是建议厂家照抄人家专利的意思哈,就是举个例子,类似这样的比较高大上的,家里手工制作比较难的,估计工厂做是小case。
吃瓜群众
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1520
注册: 07 3月 2018 22:34
Member Number (论坛会员注册序列号): #2216

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#46  帖子xiaolu » 29 6月 2020 04:54

吃瓜群众 @ Sun Jun 28, 2020 2:44 pm 写道: 给楼主一个建议:这种橡皮艇下水辅助设备好像需求量蛮大,可以作为一个产品。
https://youtu.be/pi_JB5EjffY

不是建议厂家照抄人家专利的意思哈,就是举个例子,类似这样的比较高大上的,家里手工制作比较难的,估计工厂做是小case。

楼主在中国。 您的视频链接 youtube 网站是被禁止的。 当然了, 能够翻墙的话, 那是另一码事儿。
xiaolu
Site Admin (站长)
 
帖子: 42626
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#47  帖子johndxu » 30 6月 2020 08:23

johndxu @ 23 6月 2020 07:59 写道:
michael1982 @ 23 6月 2020 03:13 写道: 1:探头用在船上有没有需要改进的地方?
2:能不能匹配市场上主流品牌的探头?

希望大家能提出宝贵意见


不错, 不错。

1。说明书上1/5 inch male screw 显然是写错了。
2。Adapter 如果只是中间一个1/4“的螺丝固定,会不会松动,转动?
3。Mounting Arm 最好附带些Clip,可以Manage FF的 Cable.
4. 因为 那个Flexible Arm 而不是硬连接,在行船中FF会不会移位?
5。那个 double sided 连接没看出来是怎样的。
6。如果塑料船比如Kayak用吸盘固定应该只需要很短的Extended Arm,甚至不需要Extended Arm,因为在水面以下吸盘的固定更稳固。
7。说明书上说在任何船上安装都不需要钻孔是不是有点夸张了?不是每种船体的材料都适合吸盘的。


:up 探头支架已到货,比较快。目测还没下水:
1。说明书上1/5 inch male screw, 原来是 M5 male screw。
2. Adapter 中间一个1/4“的螺丝固定,不会松动。但是如果把支架放在船的左边,因为螺纹的方向关系有待水上实测。
3。ManageFF Cable 可以用 尼龙索帶
4。Flexible Arm (软蛇)非常刚,与我以前在国内见过的完全不一样。
5。Double Sided 原来是指那两片红色的双面胶。
6。T-Nut 的固定方法目测可行,前提是T-Nut必须是1/4 in Thread 和适当的长度。
7。和探头连接处用的是 M4 螺栓,和这里用的1/4 in 不一样,需要配合这里的市场。
8。Adapter 和 Bracket 的连接腿的刚度和连接的刚度需要改进。
最后由 johndxu 编辑于 30 6月 2020 10:27,总共编辑了 1 次
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#48  帖子johndxu » 30 6月 2020 08:51

johndxu @ 30 6月 2020 08:23 写道:
johndxu @ 23 6月 2020 07:59 写道:
michael1982 @ 23 6月 2020 03:13 写道: 1:探头用在船上有没有需要改进的地方?
2:能不能匹配市场上主流品牌的探头?

希望大家能提出宝贵意见


不错, 不错。

1。说明书上1/5 inch male screw 显然是写错了。
2。Adapter 如果只是中间一个1/4“的螺丝固定,会不会松动,转动?
3。Mounting Arm 最好附带些Clip,可以Manage FF的 Cable.
4. 因为 那个Flexible Arm 而不是硬连接,在行船中FF会不会移位?
5。那个 double sided 连接没看出来是怎样的。
6。如果塑料船比如Kayak用吸盘固定应该只需要很短的Extended Arm,甚至不需要Extended Arm,因为在水面以下吸盘的固定更稳固。
7。说明书上说在任何船上安装都不需要钻孔是不是有点夸张了?不是每种船体的材料都适合吸盘的。


:up 探头支架已到货,比较快。目测还没下水:
1。说明书上1/5 inch male screw, 原来是 M5 male screw。
2. Adapter 中间一个1/4“的螺丝固定,不会松动。但是如果把支架放在船的左边,因为螺纹的方向关系有待水上实测。
3。ManageFF Cable 可以用 尼龙索帶
4。Flexible Arm (软蛇)非常刚,与我以前在国内见过的完全不一样。
5。Double Sided 原来是指那两片红色的双面胶。
6。T-Nut 的固定方法目测可行,前提是T-Nut必须是1/4 in Thread 和适当的长度。
7。和探头连接处用的是 M4 螺栓,和这里用的1/4 in 不一样,需要配合这里的市场。
8。Adapter 和 Bracket 的连接腿的刚度和连接的刚度需要改进。
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#49  帖子Sergeantpepper » 30 6月 2020 09:40

1。说明书上1/5 inch male screw, 原来是 M5 male screw。

何解又英制又公制呀 :laugh3 。。。一器两制乎
1” = 25.4 mm
1/5" = 5.08 mm
3/16"= 4.76 mm

會否是 3/16“ 誤以為是 5mm ? 故寫作1/5" ?

M5 有两种 pitch, 0.5 和 0.8 .... 量量看
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: hi,大家好,想找几位钓友测试下探头支架,船钓

楼层:#50  帖子johndxu » 30 6月 2020 10:26

Sergeantpepper @ 30 6月 2020 09:40 写道: 1。说明书上1/5 inch male screw, 原来是 M5 male screw。

何解又英制又公制呀 :laugh3 。。。一器两制乎
1” = 25.4 mm
1/5" = 5.08 mm
3/16"= 4.76 mm

會否是 3/16“ 誤以為是 5mm ? 故寫作1/5" ?

M5 有两种 pitch, 0.5 和 0.8 .... 量量看

又英制又公制看起来是不太专业,不过可能是因为要适应北美的市场而改成 1/4“的。也很容易改,只要在塑料件上压进一个螺母。
M5 的罗纹证实过的,用M5的螺帽轻松拧进,螺距很可能是常用的0.8,而不是细牙。
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1653
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

上一页下一页

回到 It's All About Fishin' 钓鱼!

在线用户