BASSCITY pungo   本论坛钓友“早上好菜包”(Jason): 瑞景园艺, 剪草施肥,打孔清理, 冬季铲雪。联系: Jason Cai, 手机: (647)219-8766; 微信 ID: jasoncaijiajie Great Life Wellness Centre

My very first welding project- an auger adapter

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

My very first welding project- an auger adapter

楼层:#1  帖子风帆扬 » 30 12月 2019 12:55

Long story short, I cut each a piece of a paint mixer and manual auger handle, then use a $30 welder bought from kijiji, finished my first welding project.
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
风帆扬
Major General (少将)
Major General (少将)
 
帖子: 742
注册: 21 6月 2019 05:51
Member Number (论坛会员注册序列号): #2653
地址: Brampton, ON
称呼: Charlie

Re: My very first welding project- an auger adapter

楼层:#2  帖子sunfish123 » 30 12月 2019 13:05

赞一个,不知道强度够不够
sunfish123
General (上将)
General (上将)
 
帖子: 7202
注册: 08 12月 2014 21:10
Member Number (论坛会员注册序列号): #896
地址: Dufferin Rutherford

Re: My very first welding project- an auger adapter

楼层:#3  帖子Bluelake » 30 12月 2019 13:05

Well done. :up
电焊机不错,只要30
Bluelake
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1289
注册: 24 2月 2017 21:27
Member Number (论坛会员注册序列号): #1862
地址: Collingwood

Re: My very first welding project- an auger adapter

楼层:#4  帖子Pungo » 30 12月 2019 13:09

Could be better aligned.
Pungo
General (上将)
General (上将)
 
帖子: 9833
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: My very first welding project- an auger adapter

楼层:#5  帖子Pungo » 30 12月 2019 13:12

Pungo @ Mon Dec 30, 2019 12:09 pm 写道: Could be better aligned.

转动的东西,不同心,不同轴,很危险的。
Pungo
General (上将)
General (上将)
 
帖子: 9833
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: My very first welding project- an auger adapter

楼层:#6  帖子jimi » 30 12月 2019 13:25

动手能力点个赞,图个乐,不错 :up
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 20688
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: My very first welding project- an auger adapter

楼层:#7  帖子jasontoronto » 30 12月 2019 13:51

:up
等着使用情况报告。
jasontoronto
Brigadier General (大校/准将)
Brigadier General (大校/准将)
 
帖子: 460
注册: 27 9月 2017 08:13
Member Number (论坛会员注册序列号): #2140

Re: My very first welding project- an auger adapter

楼层:#8  帖子阿恩 » 30 12月 2019 13:59

先赞一个,如果纯粹为了兴趣,可以玩玩。但其实并不如果做好,一个是强度,一个是alignment的问题,另外买一个现成不锈钢的也不贵。
阿恩
General (上将)
General (上将)
 
帖子: 5807
注册: 18 11月 2013 11:46
Member Number (论坛会员注册序列号): #193
地址: Steeles & Don Mills, North York

Re: My very first welding project- an auger adapter

楼层:#9  帖子风帆扬 » 30 12月 2019 14:31

多谢楼上各位回帖, 强度的问题不好说, 要试过才知道, 看焊接质量。 如果焊接好的话焊接部位强的实际上超过其他地方。 偏心的问题, 像这样是开放式的,稍微有点偏心应该问题不大。 也要试过才知道。 请教一下 drill是1 or 2档?
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
风帆扬
Major General (少将)
Major General (少将)
 
帖子: 742
注册: 21 6月 2019 05:51
Member Number (论坛会员注册序列号): #2653
地址: Brampton, ON
称呼: Charlie

Re: My very first welding project- an auger adapter

楼层:#10  帖子xiaolu » 30 12月 2019 14:35

jsyangyu @ Mon Dec 30, 2019 1:31 pm 写道: 多谢楼上各位回帖, 强度的问题不好说, 要试过才知道, 看焊接质量。 如果焊接好的话焊接部位强的实际上超过其他地方。 偏心的问题, 像这样是开放式的,稍微有点偏心应该问题不大。 也要试过才知道。 请教一下 drill是1 or 2档?

放在 1 裆(低速),是必须的。
xiaolu
Site Admin (站长)
 
帖子: 39585
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: My very first welding project- an auger adapter

楼层:#11  帖子Fishingdaddy » 30 12月 2019 14:44

建议楼主做个放掉装置再上冰试验。
Fishingdaddy
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2273
注册: 11 2月 2019 22:07
Member Number (论坛会员注册序列号): #2559

Re: My very first welding project- an auger adapter

楼层:#12  帖子Sergeantpepper » 30 12月 2019 14:52

牛呀 :up
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 12062
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: My very first welding project- an auger adapter

楼层:#13  帖子风帆扬 » 30 12月 2019 14:54

Fishingdaddy @ 30 Dec 2019 13:44 写道: 建议楼主做个放掉装置再上冰试验。

Will do :shake
风帆扬
Major General (少将)
Major General (少将)
 
帖子: 742
注册: 21 6月 2019 05:51
Member Number (论坛会员注册序列号): #2653
地址: Brampton, ON
称呼: Charlie

Re: My very first welding project- an auger adapter

楼层:#14  帖子Sergeantpepper » 30 12月 2019 14:54

Fishingdaddy @ Mon Dec 30, 2019 1:44 pm 写道: 建议楼主做个放掉装置再上冰试验。


防放差別極端呀 :laugh3
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 12062
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: My very first welding project- an auger adapter

楼层:#15  帖子wetnose » 30 12月 2019 14:58

Sergeantpepper @ Mon Dec 30, 2019 1:54 pm 写道:
Fishingdaddy @ Mon Dec 30, 2019 1:44 pm 写道: 建议楼主做个掉装置再上冰试验。


防放差別極端呀 :laugh3

:+1
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19382
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: My very first welding project- an auger adapter

楼层:#16  帖子Fishingdaddy » 30 12月 2019 15:28

Sergeantpepper @ 30 Dec 2019 13:54 写道:
Fishingdaddy @ Mon Dec 30, 2019 1:44 pm 写道: 建议楼主做个放掉装置再上冰试验。


防放差別極端呀 :laugh3

在这个坛子学坏了,总打错字,还不觉得错了 :laugh3
Fishingdaddy
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2273
注册: 11 2月 2019 22:07
Member Number (论坛会员注册序列号): #2559

Re: My very first welding project- an auger adapter

楼层:#17  帖子johndxu » 30 12月 2019 15:48

jsyangyu @ 30 12月 2019 11:55 写道: Long story short, I cut each a piece of a paint mixer and manual auger handle, then use a $30 welder bought from kijiji, finished my first welding project.

welder $30 好价钱啊。我刚勃克兴天在CT买了Welder,$150
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1341
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: My very first welding project- an auger adapter

楼层:#18  帖子风帆扬 » 30 12月 2019 17:01

johndxu @ 30 Dec 2019 14:48 写道:
jsyangyu @ 30 12月 2019 11:55 写道: Long story short, I cut each a piece of a paint mixer and manual auger handle, then use a $30 welder bought from kijiji, finished my first welding project.

welder $30 好价钱啊。我刚勃克兴天在CT买了Welder,$150

你这个更高级一些。
Level one: Arc Ac (mine)
Level two: Arc inverted Dc
Level three: MiG/tig
风帆扬
Major General (少将)
Major General (少将)
 
帖子: 742
注册: 21 6月 2019 05:51
Member Number (论坛会员注册序列号): #2653
地址: Brampton, ON
称呼: Charlie

Re: My very first welding project- an auger adapter

楼层:#19  帖子Sergeantpepper » 30 12月 2019 19:04

MIG/TIG 一般用不著吧, 要用 argon呀 :fishb no?
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 12062
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: My very first welding project- an auger adapter

楼层:#20  帖子风帆扬 » 30 12月 2019 20:28

Sergeantpepper @ 30 Dec 2019 18:04 写道: MIG/TIG 一般用不著吧, 要用 argon呀 :fishb no?

Yes or no.
Mig= metal insert gas(argon).
Flux means flux in wire, like soldering wire, no gas need.
Tig=tungsten insert gas

So John can use the flux function without gas tank.
最后由 风帆扬 编辑于 31 12月 2019 09:44,总共编辑了 1 次
风帆扬
Major General (少将)
Major General (少将)
 
帖子: 742
注册: 21 6月 2019 05:51
Member Number (论坛会员注册序列号): #2653
地址: Brampton, ON
称呼: Charlie

Re: My very first welding project- an auger adapter

楼层:#21  帖子Sergeantpepper » 31 12月 2019 07:53

下图可见auger 和cordless drill 的 eccentricity 相当明顯 (除非chuck頭未完全上緊)
可以先把auger 卸下, 把DIY adapter 上钻, 开动后觀察adapter 末端摆动情况
这个摆动幅度在auger 切削端會放大五倍六倍吧 (按auger長度推算)
小心使用為上....出洞时最好把原装手抦也帶上, 你明的 :)
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 12062
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: My very first welding project- an auger adapter

楼层:#22  帖子风帆扬 » 31 12月 2019 09:37

Sergeantpepper @ 31 Dec 2019 06:53 写道: 下图可见auger 和cordless drill 的 eccentricity 相当明顯 (除非chuck頭未完全上緊)
可以先把auger 卸下, 把DIY adapter 上钻, 开动后觀察adapter 末端摆动情况
这个摆动幅度在auger 切削端會放大五倍六倍吧 (按auger長度推算)
小心使用為上....出洞时最好把原装手抦也帶上, 你明的 :)

多谢了,我是想着今天要调节一下。 :up
风帆扬
Major General (少将)
Major General (少将)
 
帖子: 742
注册: 21 6月 2019 05:51
Member Number (论坛会员注册序列号): #2653
地址: Brampton, ON
称呼: Charlie

Re: My very first welding project- an auger adapter

楼层:#23  帖子johndxu » 31 12月 2019 12:15

Welding Accessaries.jpg
jsyangyu @ 30 12月 2019 19:28 写道:
Sergeantpepper @ 30 Dec 2019 18:04 写道: MIG/TIG 一般用不著吧, 要用 argon呀 :fishb no?

Yes or no.
Mig= metal insert gas(argon).
Flux means flux in wire, like soldering wire, no gas need.
Tig=tungsten insert gas

So John can use the flux function without gas tank.

看来你很懂Welding,俄狠狠久以前玩过AC和Gas的Welding。这个Welding Machine 俄买了还没打开,这个价格这个功能太赞了。还带配件,打开就能用。

FEATURES
Mastercraft Mig and Flux Welder can be used for both MIG and flux core wire
Infinite wire speed control
Four setting heat selection
MIG and flux core polarity control - quickly and easily change polarity settings
High-efficiency transformer
Thermal overload protection with light
Drive deck with dedicated power supply - helps to maintain constent wire speed
2-in-1 spool holder, spool adaptor for 4" (10 cm) and 8" (20 cm) spool wires
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1341
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: My very first welding project- an auger adapter

楼层:#24  帖子johndxu » 31 12月 2019 12:24

jsyangyu @ 31 12月 2019 08:37 写道:
Sergeantpepper @ 31 Dec 2019 06:53 写道: 下图可见auger 和cordless drill 的 eccentricity 相当明顯 (除非chuck頭未完全上緊)
可以先把auger 卸下, 把DIY adapter 上钻, 开动后觀察adapter 末端摆动情况
这个摆动幅度在auger 切削端會放大五倍六倍吧 (按auger長度推算)
小心使用為上....出洞时最好把原装手抦也帶上, 你明的 :)

多谢了,我是想着今天要调节一下。 :up

你应该找一个适当的Hex Bit Socket 焊上去,这样比较容易保持同心。
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
johndxu
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1341
注册: 19 1月 2018 22:46
Member Number (论坛会员注册序列号): #2196
地址: 201 Consumers Rd., Toronto, ON M2J 4G8
称呼: 約翰

Re: My very first welding project- an auger adapter

楼层:#25  帖子风帆扬 » 31 12月 2019 13:05

johndxu @ 31 Dec 2019 11:24 写道:
jsyangyu @ 31 12月 2019 08:37 写道:
Sergeantpepper @ 31 Dec 2019 06:53 写道: 下图可见auger 和cordless drill 的 eccentricity 相当明顯 (除非chuck頭未完全上緊)
可以先把auger 卸下, 把DIY adapter 上钻, 开动后觀察adapter 末端摆动情况
这个摆动幅度在auger 切削端會放大五倍六倍吧 (按auger長度推算)
小心使用為上....出洞时最好把原装手抦也帶上, 你明的 :)

多谢了,我是想着今天要调节一下。 :up

你应该找一个适当的Hex Bit Socket 焊上去,这样比较容易保持同心。

Good idea but most hex are 3/8 .
风帆扬
Major General (少将)
Major General (少将)
 
帖子: 742
注册: 21 6月 2019 05:51
Member Number (论坛会员注册序列号): #2653
地址: Brampton, ON
称呼: Charlie

下一页

回到 It's All About Fishin' 钓鱼!

在线用户