冰钻的大小头断了

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

冰钻的大小头断了

楼层:#1  帖子john8848 » 05 3月 2019 12:56

用了4年了,上星期打二尺的冰,快打通的时侯断了,差一点钻就喂鱼了。阿马脏上有不锈钢的较粗些,0.5英寸,可能会好些,准备上电冰钻买粗些的头一定会好些,特别是用钮力大的新款。
IMG_20190305_114345.jpg
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
john8848
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3762
注册: 30 10月 2013 20:44
Member Number (论坛会员注册序列号): #155
地址: Taunton & Brock, Whitby

Re: 冰钻的大小头断了

楼层:#2  帖子阿恩 » 05 3月 2019 12:59

钢的?铝的?我的铝的没打几个洞就断了!
阿恩
General (上将)
General (上将)
 
帖子: 6684
注册: 18 11月 2013 11:46
Member Number (论坛会员注册序列号): #193
地址: Steeles & Don Mills, North York

Re: 冰钻的大小头断了

楼层:#3  帖子john8848 » 05 3月 2019 13:11

旧的是钢的,TIRE店的, 3/8“,原来10块,现在17块。新的是不锈钢的, 0.5”,20块。 不知道能用多长时间。主要大小头断了有风险转掉下去。
john8848
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3762
注册: 30 10月 2013 20:44
Member Number (论坛会员注册序列号): #155
地址: Taunton & Brock, Whitby

Re: 冰钻的大小头断了

楼层:#4  帖子potato » 05 3月 2019 13:13

john8848 @ 周二 3月 05, 2019 11:56 am 写道: 用了4年了,上星期打二尺的冰,快打通的时侯断了,差一点钻就喂鱼了。阿马脏上有不锈钢的较粗些,0.5英寸,可能会好些,准备上电冰钻买粗些的头一定会好些,特别是用钮力大的新款。
IMG_20190305_114345.jpg

0.5 英寸的应该可以。 :shake
potato
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2606
注册: 08 10月 2013 21:17
Member Number (论坛会员注册序列号): #124

Re: 冰钻的大小头断了

楼层:#5  帖子一磅黄鲈 » 05 3月 2019 13:13

自己买个1/2的socket,钻个固定孔,这样直接和钻连起来又简单又实用花钱少! :shake
一磅黄鲈
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2666
注册: 10 7月 2014 16:55
Member Number (论坛会员注册序列号): #632
地址: Victoria /hunting wood

Re: 冰钻的大小头断了

楼层:#6  帖子potato » 05 3月 2019 13:15

一磅黄鲈 @ 周二 3月 05, 2019 12:13 pm 写道: 自己买个1/2的socket,钻个固定孔,这样直接和钻连起来又简单又实用花钱少! :shake

主意不错 :up
potato
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2606
注册: 08 10月 2013 21:17
Member Number (论坛会员注册序列号): #124

Re: 冰钻的大小头断了

楼层:#7  帖子Sergeantpepper » 05 3月 2019 13:19

您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
最后由 Sergeantpepper 编辑于 05 3月 2019 17:37,总共编辑了 1 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 冰钻的大小头断了

楼层:#8  帖子xiaolu » 05 3月 2019 13:20

一磅黄鲈 @ Tue Mar 05, 2019 12:13 pm 写道: 自己买个1/2的socket,钻个固定孔,这样直接和钻连起来又简单又实用花钱少! :shake

我真的怀疑, 就 SOCKET 的金属材料的辣么高的硬度, 用任何钻能不能钻个洞啊?
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
xiaolu
Site Admin (站长)
 
帖子: 42626
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: 冰钻的大小头断了

楼层:#9  帖子Fishingdaddy » 05 3月 2019 13:22

我也在准备入手这个半寸头。因为没有flange,小心吊到钻里卡住。还要diy个stopper防钻头去潜水。
Fishingdaddy
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2737
注册: 11 2月 2019 22:07
Member Number (论坛会员注册序列号): #2559

Re: 冰钻的大小头断了

楼层:#10  帖子一磅黄鲈 » 05 3月 2019 13:26

xiaolu @ 周二 3月 05, 2019 12:20 pm 写道:
一磅黄鲈 @ Tue Mar 05, 2019 12:13 pm 写道: 自己买个1/2的socket,钻个固定孔,这样直接和钻连起来又简单又实用花钱少! :shake

我真的怀疑, 就 SOCKET 的金属材料的辣么高的硬度, 用任何钻能不能钻个洞啊?

你不用怀疑, :laugh3 我就使用普通的高速钢钻头钻了个空,这都用了几年了!另外你这个图不是嫂给特,你这是鹅戴婆特 :laugh3 椒色给上个正确的图呗 :laugh3
一磅黄鲈
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2666
注册: 10 7月 2014 16:55
Member Number (论坛会员注册序列号): #632
地址: Victoria /hunting wood

Re: 冰钻的大小头断了

楼层:#11  帖子xiaolu » 05 3月 2019 13:28

一磅黄鲈 @ Tue Mar 05, 2019 12:26 pm 写道:
xiaolu @ 周二 3月 05, 2019 12:20 pm 写道:
一磅黄鲈 @ Tue Mar 05, 2019 12:13 pm 写道: 自己买个1/2的socket,钻个固定孔,这样直接和钻连起来又简单又实用花钱少! :shake

我真的怀疑, 就 SOCKET 的金属材料的辣么高的硬度, 用任何钻能不能钻个洞啊?

你不用怀疑, :laugh3 我就使用普通的高速钢钻头钻了个空,这都用了几年了!另外你这个图不是嫂给特,你这是鹅戴婆特 :laugh3 椒色给上个正确的图呗 :laugh3

socket adapter?
xiaolu
Site Admin (站长)
 
帖子: 42626
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: 冰钻的大小头断了

楼层:#12  帖子一磅黄鲈 » 05 3月 2019 13:30

另外钻头这边可以用这个头和socket连接,平时还不影响钻的其他平时的使用!
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
一磅黄鲈
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2666
注册: 10 7月 2014 16:55
Member Number (论坛会员注册序列号): #632
地址: Victoria /hunting wood

Re: 冰钻的大小头断了

楼层:#13  帖子Sergeantpepper » 05 3月 2019 13:31

this is the real deal, with hexagonal shank not square....get the "...Drive Hex Bit Socket"
too good if the OD fits with the auger bit's connecting ferrule

https://www.amazon.com/Performance-Tool-W32881-Drive-Socket/dp/B006G3FFU0/ref=pd_lpo_vtph_469_lp_img_2?_encoding=UTF8&psc=1&refRID=M0WDPSV5TX15H0Z7WV7X

图片
最后由 Sergeantpepper 编辑于 05 3月 2019 13:36,总共编辑了 3 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 冰钻的大小头断了

楼层:#14  帖子一磅黄鲈 » 05 3月 2019 13:31

xiaolu @ 周二 3月 05, 2019 12:28 pm 写道:
一磅黄鲈 @ Tue Mar 05, 2019 12:26 pm 写道:
xiaolu @ 周二 3月 05, 2019 12:20 pm 写道:
我真的怀疑, 就 SOCKET 的金属材料的辣么高的硬度, 用任何钻能不能钻个洞啊?

你不用怀疑, :laugh3 我就使用普通的高速钢钻头钻了个空,这都用了几年了!另外你这个图不是嫂给特,你这是鹅戴婆特 :laugh3 椒色给上个正确的图呗 :laugh3

socket adapter?

是啊!
一磅黄鲈
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2666
注册: 10 7月 2014 16:55
Member Number (论坛会员注册序列号): #632
地址: Victoria /hunting wood

Re: 冰钻的大小头断了

楼层:#15  帖子一磅黄鲈 » 05 3月 2019 13:35

:laugh3我用的是size1/2 drive是3/8的socket
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
一磅黄鲈
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2666
注册: 10 7月 2014 16:55
Member Number (论坛会员注册序列号): #632
地址: Victoria /hunting wood

Re: 冰钻的大小头断了

楼层:#16  帖子xiaolu » 05 3月 2019 13:48

Sergeantpepper @ Tue Mar 05, 2019 12:31 pm 写道: this is the real deal, with hexagonal shank not square....get the "...Drive Hex Bit Socket"
too good if the OD fits with the auger bit's connecting ferrule

https://www.amazon.com/Performance-Tool-W32881-Drive-Socket/dp/B006G3FFU0/ref=pd_lpo_vtph_469_lp_img_2?_encoding=UTF8&psc=1&refRID=M0WDPSV5TX15H0Z7WV7X


看这东西的材料, 我还是怀疑钻头能打透, 打个洞?
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
xiaolu
Site Admin (站长)
 
帖子: 42626
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: 冰钻的大小头断了

楼层:#17  帖子Sergeantpepper » 05 3月 2019 13:53

"Chrome vanadium alloy steel construction for strength and durability."

hard enough for the job, except not nearly as hard as your brain, me friend :laugh3
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 冰钻的大小头断了

楼层:#18  帖子Sergeantpepper » 05 3月 2019 14:08

阿恩 @ Tue Mar 05, 2019 11:59 am 写道: 钢的?铝的?我的铝的没打几个洞就断了!


Lz断了这个我有用, 雖然magnet sensitive 但也屬某类不銹钢材
此种adapter 最早面市的应该是鋅合金压铸出耒的, 当然不耐用....Alloy zinc die-casting, 制造成本低, 不似钢造的要CNC machine 出耒
最后由 Sergeantpepper 编辑于 05 3月 2019 14:11,总共编辑了 1 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 冰钻的大小头断了

楼层:#19  帖子一磅黄鲈 » 05 3月 2019 14:11

xiaolu @ 周二 3月 05, 2019 12:48 pm 写道:
Sergeantpepper @ Tue Mar 05, 2019 12:31 pm 写道: this is the real deal, with hexagonal shank not square....get the "...Drive Hex Bit Socket"
too good if the OD fits with the auger bit's connecting ferrule

https://www.amazon.com/Performance-Tool-W32881-Drive-Socket/dp/B006G3FFU0/ref=pd_lpo_vtph_469_lp_img_2?_encoding=UTF8&psc=1&refRID=M0WDPSV5TX15H0Z7WV7X


看这东西的材料, 我还是怀疑钻头能打透, 打个洞?

唉!站长什么时候脑袋折磨硬了?我是说socket 不是海力克socket drive,我 我—-我 我回头下班回家里上传实际图片啊
一磅黄鲈
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2666
注册: 10 7月 2014 16:55
Member Number (论坛会员注册序列号): #632
地址: Victoria /hunting wood

Re: 冰钻的大小头断了

楼层:#20  帖子john8848 » 05 3月 2019 14:13

一磅黄鲈 @ 周二 3月 05, 2019 12:13 pm 写道: 自己买个1/2的socket,钻个固定孔,这样直接和钻连起来又简单又实用花钱少! :shake

好主意!!!
john8848
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3762
注册: 30 10月 2013 20:44
Member Number (论坛会员注册序列号): #155
地址: Taunton & Brock, Whitby

Re: 冰钻的大小头断了

楼层:#21  帖子john8848 » 05 3月 2019 14:16

Sergeantpepper @ 周二 3月 05, 2019 1:08 pm 写道:
阿恩 @ Tue Mar 05, 2019 11:59 am 写道: 钢的?铝的?我的铝的没打几个洞就断了!


Lz断了这个我有用, 雖然magnet sensitive 但也屬某类不銹钢材
此种adapter 最早面市的应该是鋅合金压铸出耒的, 当然不耐用....Alloy zinc die-casting, 制造成本低, 不似钢造的要CNC machine 出耒

断口看像是压铸出耒!!
john8848
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3762
注册: 30 10月 2013 20:44
Member Number (论坛会员注册序列号): #155
地址: Taunton & Brock, Whitby

Re: 冰钻的大小头断了

楼层:#22  帖子一磅黄鲈 » 05 3月 2019 14:27

你只需这两样东西就好
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
一磅黄鲈
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2666
注册: 10 7月 2014 16:55
Member Number (论坛会员注册序列号): #632
地址: Victoria /hunting wood

Re: 冰钻的大小头断了

楼层:#23  帖子Sergeantpepper » 05 3月 2019 14:32

看出耒了, 是用个hex to square drive adapter 再加个deep socket (with square drive)
Drive bit 那弹珠能承受下面的重量就好, 否则要焊一炮或两炮

图片

图片
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 冰钻的大小头断了

楼层:#24  帖子赣西风 » 06 3月 2019 00:21

Sergeantpepper @ 周二 3月 05, 2019 1:32 pm 写道: 看出耒了, 是用个hex to square drive adapter 再加个deep socket (with square drive)
Drive bit 那弹珠能承受下面的重量就好, 否则要焊一炮或两炮





没有焊接工具是不是可以用强力胶啊? :laugh3 :laugh3
赣西风
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1998
注册: 23 3月 2014 20:13
Member Number (论坛会员注册序列号): #338
称呼: 西风

Re: 冰钻的大小头断了

楼层:#25  帖子Sergeantpepper » 06 3月 2019 06:55

赣西风 @ Tue Mar 05, 2019 11:21 pm 写道:
Sergeantpepper @ 周二 3月 05, 2019 1:32 pm 写道: 看出耒了, 是用个hex to square drive adapter 再加个deep socket (with square drive)
Drive bit 那弹珠能承受下面的重量就好, 否则要焊一炮或两炮





没有焊接工具是不是可以用强力胶啊? :laugh3 :laugh3


这得有待黄鲈兄下回分解鳥 :fishb
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

下一页

回到 It's All About Fishin' 钓鱼!

在线用户

cron