分页: 1 / 2
Milwaukee 2804 side handle (new design)
发表于 :
07 12月 2018 21:31
由 Sergeantpepper
28042704
Re: Milwaukee 2804 side handle (new design)
发表于 :
07 12月 2018 22:53
由 阿恩
这个好多了。
Re: Milwaukee 2804 side handle (new design)
发表于 :
07 12月 2018 23:33
由 wetnose
阿恩 @ Fri Dec 07, 2018 9:53 pm 写道: 这个好多了。
Re: Milwaukee 2804 side handle (new design)
发表于 :
08 12月 2018 12:24
由 sunfish123
应该可以把clam plate 的银子省下来。
Re: Milwaukee 2804 side handle (new design)
发表于 :
08 12月 2018 12:44
由 Sergeantpepper
sunfish123 @ Sat Dec 08, 2018 11:24 am 写道: 应该可以把clam plate 的银子省下来。
。。。大概也可省去5,6磅負荷,plate 重
等看用者reviews吧
Re: Milwaukee 2804 side handle (new design)
发表于 :
08 12月 2018 13:37
由 阿恩
现在这个,有问题应该也是手柄强度不够,出问题可能是手柄断裂。老款是直接drill body开裂。看review吧!
Re: Milwaukee 2804 side handle (new design)
发表于 :
08 12月 2018 13:47
由 jimi
坐等评测
只是己经有2704了,也不能换了呀
Re: Milwaukee 2804 side handle (new design)
发表于 :
08 12月 2018 14:27
由 aberdeen
阿恩 @ 周六 12月 08, 2018 12:37 pm 写道: 现在这个,有问题应该也是手柄强度不够,出问题可能是手柄断裂。老款是直接drill body开裂。看review吧!
Re: Milwaukee 2804 side handle (new design)
发表于 :
08 12月 2018 16:37
由 DIYUSOCCERLO
Do u think the new side handle will fit the old model?
Re: Milwaukee 2804 side handle (new design)
发表于 :
08 12月 2018 16:43
由 Sergeantpepper
DIYUSOCCERLO @ Sat Dec 08, 2018 3:37 pm 写道: Do u think the new side handle will fit the old model?
100% No!
check the locking features near the end of the two clamping arms, which have to lock onto the body recesses...
Re: Milwaukee 2804 side handle (new design)
发表于 :
08 12月 2018 17:43
由 DIYUSOCCERLO
I see I see. Thanks Serg
Re: Milwaukee 2804 side handle (new design)
发表于 :
08 12月 2018 17:45
由 wetnose
jimi.cui @ Sat Dec 08, 2018 12:47 pm 写道: 坐等评测
只是己经有2704了,也不能换了呀
还有2604,2704都有的,再搞一个2804,刚好678一顺!
Re: Milwaukee 2804 side handle (new design)
发表于 :
08 12月 2018 21:18
由 sunfish123
wetnose @ 周六 12月 08, 2018 4:45 pm 写道: jimi.cui @ Sat Dec 08, 2018 12:47 pm 写道: 坐等评测
只是己经有2704了,也不能换了呀
还有2604,2704都有的,再搞一个2804,刚好678一顺!
没错,左手一把26,右手一把27,胸前挂一把28, 大老远就知道土豪来了,赶紧给土豪让地滴干活。
Re: Milwaukee 2804 side handle (new design)
发表于 :
09 12月 2018 00:57
由 creativeccc
新的2804短了不少,有机会不兼容clam plate哦,我今天目测2704再短一点就会不兼容了,估计2804够呛
Re: Milwaukee 2804 side handle (new design)
发表于 :
09 12月 2018 01:31
由 Sergeantpepper
shortened by 1.5" 看来會影响开关, M 記和Clam 太缺乏默契了 想办法加長Clam Plate 那六角轴吧
Re: Milwaukee 2804 side handle (new design)
发表于 :
09 12月 2018 02:15
由 Sergeantpepper
add this for shaft extension, Hexagonal Bit Socket.....
Re: Milwaukee 2804 side handle (new design)
发表于 :
09 12月 2018 02:25
由 Sergeantpepper
那么如果要配Clam Plate 用, 最好选2704, 长短合用兼便宜100刀呀现时....扭力一样高呢
Re: Milwaukee 2804 side handle (new design)
发表于 :
10 12月 2018 16:01
由 bit&byte
我的2804和clam plate搭配没问题啊 配上9安的电池 很好用啊 我大几十个冰眼 在4、5寸冰 很轻松啊
Re: Milwaukee 2804 side handle (new design)
发表于 :
10 12月 2018 16:16
由 Sergeantpepper
bit&byte @ Mon Dec 10, 2018 3:01 pm 写道: 我的2804和clam plate搭配没问题啊 配上9安的电池 很好用啊 我大几十个冰眼 在4、5寸冰 很轻松啊
可否上幅你的2804和plate 的正面配合图解解惑 ?
Re: Milwaukee 2804 side handle (new design)
发表于 :
10 12月 2018 21:34
由 haolan0001
jimi.cui @ 周六 12月 08, 2018 12:47 pm 写道: 坐等评测
只是己经有2704了,也不能换了呀
拿过来我帮你收啦 你再去换一个新的
Re: Milwaukee 2804 side handle (new design)
发表于 :
10 12月 2018 21:40
由 jimi
Re: Milwaukee 2804 side handle (new design)
发表于 :
10 12月 2018 22:13
由 jimi
haolan0001 @ 周一 12月 10, 2018 8:34 pm 写道: jimi.cui @ 周六 12月 08, 2018 12:47 pm 写道: 坐等评测
只是己经有2704了,也不能换了呀
拿过来我帮你收啦 你再去换一个新的
对了,您钓的鱼呢?
Re: Milwaukee 2804 side handle (new design)
发表于 :
11 12月 2018 11:36
由 Sergeantpepper
Sergeantpepper @ Mon Dec 10, 2018 3:16 pm 写道: bit&byte @ Mon Dec 10, 2018 3:01 pm 写道: 我的2804和clam plate搭配没问题啊 配上9安的电池 很好用啊 我大几十个冰眼 在4、5寸冰 很轻松啊
可否上幅你的2804和plate 的正面配合图解解惑 ?
Anybody home ?
Re: Milwaukee 2804 side handle (new design)
发表于 :
11 12月 2018 12:03
由 jimi
bit&byte @ 周一 12月 10, 2018 3:01 pm 写道: 我的2804和clam plate搭配没问题啊 配上9安的电池 很好用啊 我大几十个冰眼 在4、5寸冰 很轻松啊
我只有5A H的,想把它打没电,5寸钻要打90个以上
八寸钻也接近50个
Re: Milwaukee 2804 side handle (new design)
发表于 :
11 12月 2018 12:16
由 Sergeantpepper
battery weight
5.0Ah ... 771gm
9.0Ah ...1180gm
12.0Ah ...3.4lbs nuts!
I'd use 2x5.0Ah any time......for a hand drill that is