Yak Stabilizer $239 + Lowrance Elite 7ti $669

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#101  帖子potato » 10 9月 2018 12:36

这个月底就关季了,得抓紧
potato
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2606
注册: 08 10月 2013 21:17
Member Number (论坛会员注册序列号): #124

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#102  帖子Sergeantpepper » 10 9月 2018 12:38

Beeknight @ Mon Sep 10, 2018 11:40 am 写道: 大风天只能闭门造“拐”了。

先是造访后母的婆买了些五金件。然后按照站长同鸡电话传授的绝活,请领导帮忙穿针引线,用nuts & bolts把Scotty Side Deck Mounts固定在卡雅客上。本周末争取下水实验一下。

IMG_2062.JPG


IMG_2071.JPG


IMG_2073.JPG


IMG_2076.JPG


IMG_2078.JPG


可能是“陪你啃”的船体薄,晃动stablizer时能看到mounts周围的材料有小幅度的flex;正琢磨有没有可能模仿Hobie Sidekick(见下图)在两个mounts中间加一根金属杆加固一炮。

Sidekick.jpg


Lowrance Elite 7ti也装上了。给7ah的电池做了个简单的cage藏进船头的dry hatch里。

IMG_2018.JPG


Hull里用双面胶粘了一截儿pool noodle,防止电池盒往后滑。
IMG_2019.JPG


IMG_2020.JPG


IMG_E2021.JPG


做得很简陋,有烤驴不周的地方,欢迎各位拍砖。 :shake


:up
"在两个mounts中间加一根金属杆加固一炮" ....good idea, may try to figure out the use of a straight section of ABS pipe + 2 Tees working with the existing mounts

4 cable ties for the 2 floats are missing ?

where ever screw heads or nuts are in direct contact with yak wall, better add washers of bigger O.D. in between
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#103  帖子Beeknight » 10 9月 2018 14:06

Sergeantpepper @ 周一 9月 10, 2018 12:38 pm 写道: :up
"在两个mounts中间加一根金属杆加固一炮" ....good idea, may try to figure out the use of a straight section of ABS pipe + 2 Tees working with the existing mounts

4 cable ties for the 2 floats are missing ?

where ever screw heads or nuts are in direct contact with yak wall, better add washers of bigger O.D. in between


:shake 谢谢建议!ABS pipe + 2 Tees would be a good alternative to clanky metal parts. :laugh3

Cable ties暂时还没买,说明书上说两个气囊只能充到1.9psi,我没有充太满的气。等试用几次观察后再决定。

按站长嘱咐,Yak内侧加了比mount base更大些的硬塑料片,加了两个washer。从内到外:bolt -- flat washer -- plastic backing -- yak wall -- Scotty Mount -- lock washer -- hex nut(见图)

IMG_2067.JPG


白塑料片夹在yak wall与flat washer中间。
IMG_2054.JPG


IMG_2056.JPG
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#104  帖子Pungo » 10 9月 2018 14:06

Beeknight @ Mon Sep 10, 2018 11:40 am 写道: 大风天只能闭门造“拐”了。

先是造访后母的婆买了些五金件。然后按照站长同鸡电话传授的绝活,请领导帮忙穿针引线,用nuts & bolts把Scotty Side Deck Mounts固定在卡雅客上。本周末争取下水实验一下。

IMG_2062.JPG


IMG_2071.JPG


IMG_2073.JPG


IMG_2076.JPG


IMG_2078.JPG


可能是“陪你啃”的船体薄,晃动stablizer时能看到mounts周围的材料有小幅度的flex;正琢磨有没有可能模仿Hobie Sidekick(见下图)在两个mounts中间加一根金属杆加固一炮。

Sidekick.jpg


Lowrance Elite 7ti也装上了。给7ah的电池做了个简单的cage藏进船头的dry hatch里。

IMG_2018.JPG


Hull里用双面胶粘了一截儿pool noodle,防止电池盒往后滑。
IMG_2019.JPG


IMG_2020.JPG


IMG_E2021.JPG


做得很简陋,有烤驴不周的地方,欢迎各位拍砖。 :shake

垫片太小,最好一个loonie大小。
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#105  帖子Beeknight » 10 9月 2018 14:10

Pungo @ 周一 9月 10, 2018 2:06 pm 写道:垫片太小,最好一个loonie大小。


垫片有信用卡大小,看#103。 :shake
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#106  帖子Sergeantpepper » 10 9月 2018 14:18

Beeknight @ Mon Sep 10, 2018 2:10 pm 写道:
Pungo @ 周一 9月 10, 2018 2:06 pm 写道:垫片太小,最好一个loonie大小。


垫片有信用卡大小,看#103。 :shake


那足夠credit 的了 :laugh3

假如仍想用特大washer 而又找不着, 可将小內径十較大內经washer 叠起一块用
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#107  帖子Pungo » 10 9月 2018 14:21

Beeknight @ Mon Sep 10, 2018 2:10 pm 写道:
Pungo @ 周一 9月 10, 2018 2:06 pm 写道:垫片太小,最好一个loonie大小。


垫片有信用卡大小,看#103。 :shake

发完帖发现多了一层楼。弹簧垫没有必要,螺丝氧化以后拧下来都难。
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#108  帖子Beeknight » 10 9月 2018 14:24

Sergeantpepper @ 周一 9月 10, 2018 2:18 pm 写道:
Beeknight @ Mon Sep 10, 2018 2:10 pm 写道:
Pungo @ 周一 9月 10, 2018 2:06 pm 写道:垫片太小,最好一个loonie大小。


垫片有信用卡大小,看#103。 :shake


那足夠credit 的了 :laugh3

假如仍想用特大washer 而又找不着, 可将小內径十較大內经washer 叠起一块用


:up
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#109  帖子Beeknight » 10 9月 2018 14:26

Pungo @ 周一 9月 10, 2018 2:21 pm 写道:
Beeknight @ Mon Sep 10, 2018 2:10 pm 写道:
Pungo @ 周一 9月 10, 2018 2:06 pm 写道:垫片太小,最好一个loonie大小。


垫片有信用卡大小,看#103。 :shake

发完帖发现多了一层楼。弹簧垫没有必要,螺丝氧化以后拧下来都难。


不锈钢hardware也会有这问题吗?
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#110  帖子Pungo » 10 9月 2018 14:29

Beeknight @ Mon Sep 10, 2018 2:26 pm 写道:
Pungo @ 周一 9月 10, 2018 2:21 pm 写道:
Beeknight @ Mon Sep 10, 2018 2:10 pm 写道:

垫片有信用卡大小,看#103。 :shake

发完帖发现多了一层楼。弹簧垫没有必要,螺丝氧化以后拧下来都难。


不锈钢hardware也会有这问题吗?

不知道,我倒觉得镀锌件就很好,氧化后自然封死。
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#111  帖子Beeknight » 10 9月 2018 14:37

Pungo @ 周一 9月 10, 2018 2:29 pm 写道:
Beeknight @ Mon Sep 10, 2018 2:26 pm 写道:
Pungo @ 周一 9月 10, 2018 2:21 pm 写道:
发完帖发现多了一层楼。弹簧垫没有必要,螺丝氧化以后拧下来都难。


不锈钢hardware也会有这问题吗?

不知道,我倒觉得镀锌件就很好,氧化后自然封死。


我晕了,oxymoron? :fishb
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#112  帖子Pungo » 10 9月 2018 14:48

Beeknight @ Mon Sep 10, 2018 2:37 pm 写道:
Pungo @ 周一 9月 10, 2018 2:29 pm 写道:
Beeknight @ Mon Sep 10, 2018 2:26 pm 写道:

不锈钢hardware也会有这问题吗?

不知道,我倒觉得镀锌件就很好,氧化后自然封死。


我晕了,oxymoron? :fishb

镀锌件的表面的锌氧化(oxidation)后使螺丝转动困难,起到固定的作用。
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#113  帖子Sergeantpepper » 10 9月 2018 14:57

氧化后难拆不好, 但也起到固定作用…司令这是輸打赢要的節奏呀 :roflmao 我好乱呀
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#114  帖子Beeknight » 10 9月 2018 14:57

Pungo @ 周一 9月 10, 2018 2:48 pm 写道:
Beeknight @ Mon Sep 10, 2018 2:37 pm 写道:
Pungo @ 周一 9月 10, 2018 2:29 pm 写道:
不知道,我倒觉得镀锌件就很好,氧化后自然封死。


我晕了,oxymoron? :fishb

镀锌件的表面的锌氧化(oxidation)后使螺丝转动困难,起到固定的作用。


这我明白,只是觉得您两次的回复似乎有些自相矛盾——第一帖说用了弹簧垫螺丝会拧不下来(拧不下来是坏事);第二帖说利用镀锌件的氧化自然封死固定螺母(拧不下来是好事)。还是说镀锌件只是让螺母难拧,而不至于锁死? :laugh3
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#115  帖子Pungo » 10 9月 2018 15:03

Beeknight @ Mon Sep 10, 2018 2:57 pm 写道:
Pungo @ 周一 9月 10, 2018 2:48 pm 写道:
Beeknight @ Mon Sep 10, 2018 2:37 pm 写道:

我晕了,oxymoron? :fishb

镀锌件的表面的锌氧化(oxidation)后使螺丝转动困难,起到固定的作用。


这我明白,只是觉得您两次的回复似乎有些自相矛盾——第一帖说用了弹簧垫螺丝会拧不下来(拧不下来是坏事);第二帖说利用镀锌件的氧化自然封死固定螺母(拧不下来是好事)。还是说镀锌件只是让螺母难拧,而不至于锁死? :laugh3

谢谢你这么仔细看我瞎BB,嘿嘿!我说弹簧垫没有必要,为什么呢?因为弹簧垫是为了防止螺丝松动,可是你用镀锌件的话,镀锌件一氧化根本就不会松动了,所以就不需要弹簧垫了。
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#116  帖子Beeknight » 10 9月 2018 15:15

Pungo @ 周一 9月 10, 2018 3:03 pm 写道:
Beeknight @ Mon Sep 10, 2018 2:57 pm 写道:
Pungo @ 周一 9月 10, 2018 2:48 pm 写道:
镀锌件的表面的锌氧化(oxidation)后使螺丝转动困难,起到固定的作用。


这我明白,只是觉得您两次的回复似乎有些自相矛盾——第一帖说用了弹簧垫螺丝会拧不下来(拧不下来是坏事);第二帖说利用镀锌件的氧化自然封死固定螺母(拧不下来是好事)。还是说镀锌件只是让螺母难拧,而不至于锁死? :laugh3

谢谢你这么仔细看我瞎BB,嘿嘿!我说弹簧垫没有必要,为什么呢?因为弹簧垫是为了防止螺丝松动,可是你用镀锌件的话,镀锌件一氧化根本就不会松动了,所以就不需要弹簧垫了。


哈哈,这下明白了。 :shake
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#117  帖子Sergeantpepper » 10 9月 2018 16:22

别理那ABS pipe + tee idea
把两个mounts 各一边相对的一粿罗絲加長, 用長条1x 2 木好, 鋁方通, 扁鋁, 角鈇也好, 头尾钻两孔跨上两口加長的罗絲, 结扎结赈 :fishb

图片
最后由 Sergeantpepper 编辑于 10 9月 2018 16:31,总共编辑了 1 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#118  帖子fisher28 » 10 9月 2018 16:30

恢复299了 :verysad
fisher28
Brigadier General (大校/准将)
Brigadier General (大校/准将)
 
帖子: 489
注册: 13 6月 2014 16:32
Member Number (论坛会员注册序列号): #552

Re: Scotty Yak Stabilizer $239 Free Shipping

楼层:#119  帖子wetnose » 10 9月 2018 19:09

xiaolu @ Tue Sep 04, 2018 11:02 am 写道: 好价格, 此"可败了"店里正常价是 $299

你应该再买一副存着! :laugh3
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#120  帖子Beeknight » 10 9月 2018 20:37

Sergeantpepper @ 周一 9月 10, 2018 4:22 pm 写道: 别理那ABS pipe + tee idea
把两个mounts 各一边相对的一粿罗絲加長, 用長条1x 2 木好, 鋁方通, 扁鋁, 角鈇也好, 头尾钻两孔跨上两口加長的罗絲, 结扎结赈 :fishb



:up 这更好!直接把一边mounts的受力分摊给另一侧,多谢 :shake
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#121  帖子Bluelake » 10 9月 2018 23:06

恭喜大功告成,下一步就等着白妞,黑妞上床了
Bluelake
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1404
注册: 24 2月 2017 21:27
Member Number (论坛会员注册序列号): #1862
地址: Collingwood

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#122  帖子Beeknight » 11 9月 2018 09:11

Sergeantpepper @ 周一 9月 10, 2018 4:22 pm 写道: 别理那ABS pipe + tee idea
把两个mounts 各一边相对的一粿罗絲加長, 用長条1x 2 木好, 鋁方通, 扁鋁, 角鈇也好, 头尾钻两孔跨上两口加長的罗絲, 结扎结赈 :fishb



今天上班路上又琢磨了一下。把八颗螺丝都加长,用长条材料(flex较小的金属之流)头尾钻八个孔,水平横跨两个mount,夹在yak wall和mount中间,穿过八颗加长螺丝。这样的话来自浮筒的力直接作用于该材料上,对yak wall的压力就更小了。 :feed
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#123  帖子xiaolu » 11 9月 2018 09:14

Beeknight @ Tue Sep 11, 2018 9:11 am 写道:
Sergeantpepper @ 周一 9月 10, 2018 4:22 pm 写道: 别理那ABS pipe + tee idea
把两个mounts 各一边相对的一粿罗絲加長, 用長条1x 2 木好, 鋁方通, 扁鋁, 角鈇也好, 头尾钻两孔跨上两口加長的罗絲, 结扎结赈 :fishb



今天上班路上又琢磨了一下。把八颗螺丝都加长,用长条材料(flex较小的金属之流)头尾钻八个孔,水平横跨两个mount,夹在yak wall和mount中间,穿过八颗加长螺丝。这样的话来自浮筒的力直接作用于该材料上,对yak wall的压力就更小了。 :feed

高, 实在是高! :up
xiaolu
Site Admin (站长)
 
帖子: 42626
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#124  帖子Sergeantpepper » 11 9月 2018 09:26

Beeknight @ Tue Sep 11, 2018 9:11 am 写道:
Sergeantpepper @ 周一 9月 10, 2018 4:22 pm 写道: 别理那ABS pipe + tee idea
把两个mounts 各一边相对的一粿罗絲加長, 用長条1x 2 木好, 鋁方通, 扁鋁, 角鈇也好, 头尾钻两孔跨上两口加長的罗絲, 结扎结赈 :fishb



今天上班路上又琢磨了一下。把八颗螺丝都加长,用长条材料(flex较小的金属之流)头尾钻八个孔,水平横跨两个mount,夹在yak wall和mount中间,穿过八颗加长螺丝。这样的话来自浮筒的力直接作用于该材料上,对yak wall的压力就更小了。 :feed


ideas are ever being sharpened up :up

flex ? that'd only take care of tensions, dont forget about compressions :fishb yak & floats will NOT bounce up and down in perfect harmony

just come to mind that you dont wanna replace the screws as they are :roflmao flex for thin
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: Yak Stabilizer $239 + Lowrance Elite 7ti $669

楼层:#125  帖子Beeknight » 11 9月 2018 09:39

Sergeantpepper @ 周二 9月 11, 2018 9:26 am 写道:ideas are ever being sharpened up :up

flex ? that'd only take care of tensions, dont forget about compressions :fishb yak & floats will NOT bounce up and down in perfect harmony


:shake 不很明白tension和compression的区别,愿闻其详。

BTW,aluminum metal flat bar合用吗?1/8inch厚度是不是太薄?Lowes最宽的只有2",我需要个4"宽的来cover mount base。https://www.lowes.ca/metal-products/hillman-aluminum-metal-flat-bar_g1185843.html

呼唤Tigeroffroad!! :laugh3

家里木料倒是有一些,切割成合适的尺寸不成问题,但在水上用总觉得木头不耐久。用线fish out 8根螺丝,再一根根地倒着拧紧螺母可不是something I look forward to repeating. :roflmao
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

上一页下一页

回到 It's All About Fishin' 钓鱼!

在线用户