请教万能的论坛 -- trolling motor

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

Re: 请教万能的论坛 -- trolling motor

楼层:#26  帖子startlearn » 12 7月 2018 21:37

Sergeantpepper @ Thu Jul 12, 2018 8:14 pm 写道: 倒車, 前車, 倒車......多做几转可弄走纏草, 在草堆混最好常做, 不要让问题累積过大



谢谢椒sir您了, 这么简单的方法,您要是不说。 我楞是不知道。 直接把马达烧了。
startlearn
Colonel (上校)
 
帖子: 165
注册: 21 9月 2013 21:47
Member Number (论坛会员注册序列号): #54
地址: Richmond Hill

Re: 请教万能的论坛 -- trolling motor

楼层:#27  帖子startlearn » 12 7月 2018 21:43

白雪丹枫 @ Thu Jul 12, 2018 8:19 pm 写道:
startlearn @ 周四 7月 12, 2018 7:06 pm 写道:




谢大师, 收藏了, 不好意思, 弱弱为您一个问题:
当您遇到有草缠住的时候, 如何处理? 立刻停止, 把草摘掉?
那样的话, 如果到处都是杂草,怎么办? 还是干脆不用马达了? 谢谢


我很少到草堆里钓鱼。偶尔有缠上草,马达就转不快了,只能马上清理掉。



谢谢大大师, 看样子还是不能手懒。 以后马上清理掉。 或者干脆关机不用。
startlearn
Colonel (上校)
 
帖子: 165
注册: 21 9月 2013 21:47
Member Number (论坛会员注册序列号): #54
地址: Richmond Hill

Re: 请教万能的论坛 -- trolling motor

楼层:#28  帖子Sergeantpepper » 12 7月 2018 22:02

長久算, 最好在+ve 线加个 in-line fuse (超温燒掉后要換, 要常备替換), 或 circuit breaker (超荷时會自动跳制, 待冷卻后要reset, 亦有自动reset 的, 就是要畧等:) )
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 请教万能的论坛 -- trolling motor

楼层:#29  帖子白雪丹枫 » 12 7月 2018 22:35

Sergeantpepper @ 周四 7月 12, 2018 10:02 pm 写道: 長久算, 最好在+ve 线加个 in-line fuse (超温燒掉后要換, 要常备替換), 或 circuit breaker (超荷时會自动跳制, 待冷卻后要reset, 亦有自动reset 的, 就是要畧等:) )


不建议用auto reset的breaker, 有安全隐患。
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14857
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: 请教万能的论坛 -- trolling motor

楼层:#30  帖子startlearn » 15 7月 2018 00:27

Sergeantpepper @ Wed Jul 11, 2018 7:36 am 写道:
startlearn @ Tue Jul 10, 2018 9:28 pm 写道: 回复各位大师,

刚刚用全新的电池试了试, 一动不动, 看来彻底完蛋了。 只有在周末看看能否打开, 瞎咕嘟咕嘟。

谢谢各位


https://www.lakesimcoemessageboard.com/forums/index.php?topic=6393.0
可参考11楼 guidelines





按照 椒sir 提供的链接, 和 白将军 提供 的 trolling motor 手册。 今天把 马达的上部拆开, 就发现 switch control box 正极烧化了。
请看附图。

有两个问题请教:
1: 网上 search part, 2064028 SWITCH, 5 SPD FORWARD, 3 REVERSE, 从这里找到:从图片看完全一样。
https://www.mikesreelrepair.com/2064028-switch-5-spd-forward-3-reverse/
它的 part number is: 2064028, (amazon.ca 也有)。
但是从 白将军 提供 的 trolling motor 手册, item #44, part numbe is "2994040 CONTROL BOX"
请问, 这是同一个东西吗? (从来没在网上 order 东西, 怕买错了)

2: 还没有拆马达的下部分检查线圈的短路或断路,如果线圈也短路, 即使换了新开关,还会再烧的,理解对吗 ? 所以有必要再拆开下部分检查吗?

先谢谢
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
startlearn
Colonel (上校)
 
帖子: 165
注册: 21 9月 2013 21:47
Member Number (论坛会员注册序列号): #54
地址: Richmond Hill

Re: 请教万能的论坛 -- trolling motor

楼层:#31  帖子白雪丹枫 » 15 7月 2018 05:28

startlearn @ 周日 7月 15, 2018 12:27 am 写道:
Sergeantpepper @ Wed Jul 11, 2018 7:36 am 写道:
startlearn @ Tue Jul 10, 2018 9:28 pm 写道: 回复各位大师,

刚刚用全新的电池试了试, 一动不动, 看来彻底完蛋了。 只有在周末看看能否打开, 瞎咕嘟咕嘟。

谢谢各位


https://www.lakesimcoemessageboard.com/forums/index.php?topic=6393.0
可参考11楼 guidelines





按照 椒sir 提供的链接, 和 白将军 提供 的 trolling motor 手册。 今天把 马达的上部拆开, 就发现 switch control box 正极烧化了。
请看附图。

有两个问题请教:
1: 网上 search part, 2064028 SWITCH, 5 SPD FORWARD, 3 REVERSE, 从这里找到:从图片看完全一样。
https://www.mikesreelrepair.com/2064028-switch-5-spd-forward-3-reverse/
它的 part number is: 2064028, (amazon.ca 也有)。
但是从 白将军 提供 的 trolling motor 手册, item #44, part numbe is "2994040 CONTROL BOX"
请问, 这是同一个东西吗? (从来没在网上 order 东西, 怕买错了)

2: 还没有拆马达的下部分检查线圈的短路或断路,如果线圈也短路, 即使换了新开关,还会再烧的,理解对吗 ? 所以有必要再拆开下部分检查吗?

先谢谢


第一个,可以和厂家确认。
第二个,用万用表一量就行,不用拆。
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14857
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: 请教万能的论坛 -- trolling motor

楼层:#32  帖子Sergeantpepper » 15 7月 2018 07:01

你的馬达跟白将的不同型号吧

http://trollingmotorparts.com/minn-kota-endura-max-control-board-top-cover/
2994040 是control box 連 control board 套装賣, 贵很多的
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 请教万能的论坛 -- trolling motor

楼层:#33  帖子startlearn » 15 7月 2018 12:01

白雪丹枫 @ Sun Jul 15, 2018 5:28 am 写道:
startlearn @ 周日 7月 15, 2018 12:27 am 写道:
Sergeantpepper @ Wed Jul 11, 2018 7:36 am 写道:

https://www.lakesimcoemessageboard.com/forums/index.php?topic=6393.0
可参考11楼 guidelines





按照 椒sir 提供的链接, 和 白将军 提供 的 trolling motor 手册。 今天把 马达的上部拆开, 就发现 switch control box 正极烧化了。
请看附图。

有两个问题请教:
1: 网上 search part, 2064028 SWITCH, 5 SPD FORWARD, 3 REVERSE, 从这里找到:从图片看完全一样。
https://www.mikesreelrepair.com/2064028-switch-5-spd-forward-3-reverse/
它的 part number is: 2064028, (amazon.ca 也有)。
但是从 白将军 提供 的 trolling motor 手册, item #44, part numbe is "2994040 CONTROL BOX"
请问, 这是同一个东西吗? (从来没在网上 order 东西, 怕买错了)

2: 还没有拆马达的下部分检查线圈的短路或断路,如果线圈也短路, 即使换了新开关,还会再烧的,理解对吗 ? 所以有必要再拆开下部分检查吗?

先谢谢


第一个,可以和厂家确认。
第二个,用万用表一量就行,不用拆。




谢谢白将军, 按您说的做
startlearn
Colonel (上校)
 
帖子: 165
注册: 21 9月 2013 21:47
Member Number (论坛会员注册序列号): #54
地址: Richmond Hill

Re: 请教万能的论坛 -- trolling motor

楼层:#34  帖子startlearn » 15 7月 2018 12:04

Sergeantpepper @ Sun Jul 15, 2018 7:01 am 写道: 你的馬达跟白将的不同型号吧

http://trollingmotorparts.com/minn-kota-endura-max-control-board-top-cover/
2994040 是control box 連 control board 套装賣, 贵很多的




谢谢 椒sir大师, 您是对的, 型号不同。 可以安心 order part 了。
startlearn
Colonel (上校)
 
帖子: 165
注册: 21 9月 2013 21:47
Member Number (论坛会员注册序列号): #54
地址: Richmond Hill

Re: 请教万能的论坛 -- trolling motor

楼层:#35  帖子startlearn » 17 7月 2018 16:30

白雪丹枫 @ Thu Jul 12, 2018 10:35 pm 写道:
Sergeantpepper @ 周四 7月 12, 2018 10:02 pm 写道: 長久算, 最好在+ve 线加个 in-line fuse (超温燒掉后要換, 要常备替換), 或 circuit breaker (超荷时會自动跳制, 待冷卻后要reset, 亦有自动reset 的, 就是要畧等:) )


不建议用auto reset的breaker, 有安全隐患。




请问 椒sir大师 和白将军, (现已经 order part, is on the way)

您们所指出的:“加过载保护器在电路, 加个breaker, 最好在+ve 线加个 in-line fuse” 是什么样子,网上search,太多太复杂, 是串联在 接电瓶的正极或负极吗?(图1, 是电路图)

另外, 按照您所指示的 测量了 4 根线电阻, (黑 B, 红R, 白W,黄Y) 之间所有的电阻, 除了 白线W与其他线 之间 是 1.2 to 1.4 Ω, 其他之间 都是 0.3 to 0.6 Ω.
应该没有击穿吧? (应该没有烧 断路吧) ?

不好意思, 太低级的问题了, 请不要见笑。
谢谢了。
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
startlearn
Colonel (上校)
 
帖子: 165
注册: 21 9月 2013 21:47
Member Number (论坛会员注册序列号): #54
地址: Richmond Hill

Re: 请教万能的论坛 -- trolling motor

楼层:#36  帖子白雪丹枫 » 17 7月 2018 17:32

startlearn @ 周二 7月 17, 2018 4:30 pm 写道:
白雪丹枫 @ Thu Jul 12, 2018 10:35 pm 写道:
Sergeantpepper @ 周四 7月 12, 2018 10:02 pm 写道: 長久算, 最好在+ve 线加个 in-line fuse (超温燒掉后要換, 要常备替換), 或 circuit breaker (超荷时會自动跳制, 待冷卻后要reset, 亦有自动reset 的, 就是要畧等:) )


不建议用auto reset的breaker, 有安全隐患。




请问 椒sir大师 和白将军, (现已经 order part, is on the way)

您们所指出的:“加过载保护器在电路, 加个breaker, 最好在+ve 线加个 in-line fuse” 是什么样子,网上search,太多太复杂, 是串联在 接电瓶的正极或负极吗?(图1, 是电路图)

另外, 按照您所指示的 测量了 4 根线电阻, (黑 B, 红R, 白W,黄Y) 之间所有的电阻, 除了 白线W与其他线 之间 是 1.2 to 1.4 Ω, 其他之间 都是 0.3 to 0.6 Ω.
应该没有击穿吧? (应该没有烧 断路吧) ?

不好意思, 太低级的问题了, 请不要见笑。
谢谢了。


Breaker加在电池正极处,尽量靠近电池。
马达应该是好的。正常情况是击穿开路,不应该短路。装好breaker后一试便知。
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14857
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: 请教万能的论坛 -- trolling motor

楼层:#37  帖子Sergeantpepper » 17 7月 2018 20:04

一般用 防水的 glass cartridge fuse 或 wedge fuse 都可以, 没有问题是愚蠢的 :fishb
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 请教万能的论坛 -- trolling motor

楼层:#38  帖子startlearn » 17 7月 2018 23:14

Sergeantpepper @ Tue Jul 17, 2018 8:04 pm 写道: 一般用 防水的 glass cartridge fuse 或 wedge fuse 都可以, 没有问题是愚蠢的 :fishb




谢谢两位大师, 照您们说的做, 按您们说的买。 没错。
startlearn
Colonel (上校)
 
帖子: 165
注册: 21 9月 2013 21:47
Member Number (论坛会员注册序列号): #54
地址: Richmond Hill

Re: 请教万能的论坛 -- trolling motor

楼层:#39  帖子gryphon » 18 7月 2018 23:28

直接买个电池盒吧。自带断路器。也更容易接线。https://www.amazon.ca/Minn-Kota-1820175-Trolling-Center/dp/
gryphon
Senior Captain (大尉)
 
帖子: 55
注册: 24 7月 2015 13:36
Member Number (论坛会员注册序列号): #1231

Re: 请教万能的论坛 -- trolling motor

楼层:#40  帖子startlearn » 26 7月 2018 16:14

Sergeantpepper @ Tue Jul 17, 2018 8:04 pm 写道: 一般用 防水的 glass cartridge fuse 或 wedge fuse 都可以, 没有问题是愚蠢的 :fishb




昨天终于等到 switch part delivered。

同时按照大师的指点, 买了 60 amp in-line-fuse. 试了试。

马达转了。 应该工作, 没有问题。 (还没有下水)。

衷心感谢椒sir 和 白将军等各位大师的耐心的讲解和指导
startlearn
Colonel (上校)
 
帖子: 165
注册: 21 9月 2013 21:47
Member Number (论坛会员注册序列号): #54
地址: Richmond Hill

Re: 请教万能的论坛 -- trolling motor

楼层:#41  帖子白雪丹枫 » 26 7月 2018 17:48

startlearn @ 周四 7月 26, 2018 4:14 pm 写道:
Sergeantpepper @ Tue Jul 17, 2018 8:04 pm 写道: 一般用 防水的 glass cartridge fuse 或 wedge fuse 都可以, 没有问题是愚蠢的 :fishb




昨天终于等到 switch part delivered。

同时按照大师的指点, 买了 60 amp in-line-fuse. 试了试。

马达转了。 应该工作, 没有问题。 (还没有下水)。

衷心感谢椒sir 和 白将军等各位大师的耐心的讲解和指导


马达别空转,要在水里才能用。

只是试一下应该问题不大,但不是个好习惯。
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14857
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: 请教万能的论坛 -- trolling motor

楼层:#42  帖子startlearn » 27 7月 2018 09:48

白雪丹枫 @ Thu Jul 26, 2018 5:48 pm 写道:
startlearn @ 周四 7月 26, 2018 4:14 pm 写道:
Sergeantpepper @ Tue Jul 17, 2018 8:04 pm 写道: 一般用 防水的 glass cartridge fuse 或 wedge fuse 都可以, 没有问题是愚蠢的 :fishb




昨天终于等到 switch part delivered。

同时按照大师的指点, 买了 60 amp in-line-fuse. 试了试。

马达转了。 应该工作, 没有问题。 (还没有下水)。

衷心感谢椒sir 和 白将军等各位大师的耐心的讲解和指导


马达别空转,要在水里才能用。

只是试一下应该问题不大,但不是个好习惯。




白将军, 明白了。 不会再空转了。 昨晚 放在水里试了。 没问题。 谢谢您 耐心细致的指导
startlearn
Colonel (上校)
 
帖子: 165
注册: 21 9月 2013 21:47
Member Number (论坛会员注册序列号): #54
地址: Richmond Hill

Re: 请教万能的论坛 -- trolling motor

楼层:#43  帖子白雪丹枫 » 27 7月 2018 12:12

startlearn @ 周五 7月 27, 2018 9:48 am 写道:
白雪丹枫 @ Thu Jul 26, 2018 5:48 pm 写道:
startlearn @ 周四 7月 26, 2018 4:14 pm 写道:



昨天终于等到 switch part delivered。

同时按照大师的指点, 买了 60 amp in-line-fuse. 试了试。

马达转了。 应该工作, 没有问题。 (还没有下水)。

衷心感谢椒sir 和 白将军等各位大师的耐心的讲解和指导


马达别空转,要在水里才能用。

只是试一下应该问题不大,但不是个好习惯。




白将军, 明白了。 不会再空转了。 昨晚 放在水里试了。 没问题。 谢谢您 耐心细致的指导


不客气! :shake
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14857
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: 请教万能的论坛 -- trolling motor

楼层:#44  帖子王锦枫 » 27 7月 2018 20:25

把螺旋桨拆开 看下是不是草或鱼线在里面卡住了。
王锦枫
Captain (上尉)
 
帖子: 44
注册: 26 2月 2015 17:44
Member Number (论坛会员注册序列号): #964
地址: richmond hill
称呼: daniel

Re: 请教万能的论坛 -- trolling motor

楼层:#45  帖子PaulZ » 30 7月 2018 11:35

我的电子马达冒烟了。minncoda powerdrive. 1年半新。希望保修还好用
PaulZ
Second Lieutenant (少尉)
 
帖子: 22
注册: 22 1月 2017 23:19
Member Number (论坛会员注册序列号): #1841

Re: 请教万能的论坛 -- trolling motor

楼层:#46  帖子PaulZ » 30 7月 2018 11:36

空转没问题, 放水里就冒烟
PaulZ
Second Lieutenant (少尉)
 
帖子: 22
注册: 22 1月 2017 23:19
Member Number (论坛会员注册序列号): #1841

Re: 请教万能的论坛 -- trolling motor

楼层:#47  帖子potato » 30 7月 2018 11:49

进水了吧,那电机够呛
potato
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2606
注册: 08 10月 2013 21:17
Member Number (论坛会员注册序列号): #124

Re: 请教万能的论坛 -- trolling motor

楼层:#48  帖子startlearn » 30 7月 2018 16:10

PaulZ @ Mon Jul 30, 2018 11:36 am 写道: 空转没问题, 放水里就冒烟



我的现象和您的不一样, (我的是一点都不转了, switch 烧了), 请看上边的图)
startlearn
Colonel (上校)
 
帖子: 165
注册: 21 9月 2013 21:47
Member Number (论坛会员注册序列号): #54
地址: Richmond Hill

Re: 请教万能的论坛 -- trolling motor

楼层:#49  帖子PaulZ » 30 7月 2018 22:47

不知道啥问题,还在保修期。送去修了。
PaulZ
Second Lieutenant (少尉)
 
帖子: 22
注册: 22 1月 2017 23:19
Member Number (论坛会员注册序列号): #1841

Re: 请教万能的论坛 -- trolling motor

楼层:#50  帖子Sergeantpepper » 03 8月 2018 08:51

PaulZ @ Mon Jul 30, 2018 10:47 pm 写道: 不知道啥问题,还在保修期。送去修了。


冒烟电推修妥了没, 修了什么 ? :fishb :shake
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

上一页下一页

回到 It's All About Fishin' 钓鱼!

在线用户