万能论坛

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

万能论坛

楼层:#1  帖子Pungo » 22 5月 2018 10:22

想把这个手拧的螺母焊到螺栓帽上,这样就不要螺丝刀也可以上螺丝了。哪位大侠可以帮忙,或者还有其它解决方案?
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: 万能论坛

楼层:#2  帖子吃瓜群众 » 22 5月 2018 10:40

这样焊接恐怕不牢靠。如果用一个矩形铁片插入螺帽的槽内再焊会结实一点?

还有,螺帽应该是镀锌的,能焊吗?
吃瓜群众
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1520
注册: 07 3月 2018 22:34
Member Number (论坛会员注册序列号): #2216

Re: 万能论坛

楼层:#3  帖子potato » 22 5月 2018 10:43

把螺栓头切掉,螺母就可以拧进去了。不知你干什么用。
potato
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2606
注册: 08 10月 2013 21:17
Member Number (论坛会员注册序列号): #124

Re: 万能论坛

楼层:#4  帖子gryphon » 22 5月 2018 10:52

Does this work?
Thumbscrew Knobs
https://spaenaur.com/pdf/sectionB/B336.pdf

gryphon
Senior Captain (大尉)
 
帖子: 55
注册: 24 7月 2015 13:36
Member Number (论坛会员注册序列号): #1231

Re: 万能论坛

楼层:#5  帖子阿恩 » 22 5月 2018 11:00

不知道司令的目的,但肯定有更简单的解决办法。
阿恩
General (上将)
General (上将)
 
帖子: 6684
注册: 18 11月 2013 11:46
Member Number (论坛会员注册序列号): #193
地址: Steeles & Don Mills, North York

Re: 万能论坛

楼层:#6  帖子河上笑 » 22 5月 2018 11:11

河上笑
General (上将)
General (上将)
 
帖子: 7400
注册: 10 9月 2014 17:59
Member Number (论坛会员注册序列号): #787
地址: Markham, Ontario

Re: 万能论坛

楼层:#7  帖子potato » 22 5月 2018 11:19

实在不行,把你家剪草机上的卸下来也可以用。
potato
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2606
注册: 08 10月 2013 21:17
Member Number (论坛会员注册序列号): #124

Re: 万能论坛

楼层:#8  帖子Pungo » 22 5月 2018 12:02

谢谢各位!哇塞!都是好办法!BDBD(不得不顶)!!
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: 万能论坛

楼层:#9  帖子Pungo » 22 5月 2018 12:27

这个应该是解决方案
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: 万能论坛

楼层:#10  帖子Pungo » 22 5月 2018 12:38

这是我研究安装费师范的最新成果,不用打洞,不要胶带,安装在船尾,平时不装在kayak上,需要时岸边三个螺丝手拧搞定。
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: 万能论坛

楼层:#11  帖子白雪丹枫 » 22 5月 2018 12:53

我可以帮你焊。只要你告诉我螺丝的规格和长度就行,材料我都有。

当然,现成的带螺丝的wing nut商店里就买得到。我用的都是自己焊的,一是防锈,二是省钱。 :laugh3
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14857
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: 万能论坛

楼层:#12  帖子Pungo » 22 5月 2018 13:00

白雪丹枫 @ Tue May 22, 2018 12:53 pm 写道: 我可以帮你焊。只要你告诉我螺丝的规格和长度就行,材料我都有。

当然,现成的带螺丝的wing nut商店里就买得到。我用的都是自己焊的,一是防锈,二是省钱。 :laugh3

谢谢黄兄!home depot几毛钱一个,没有更便宜的了,有大项目再找您。 :shake
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: 万能论坛

楼层:#13  帖子白雪丹枫 » 22 5月 2018 13:01

Pungo @ 周二 5月 22, 2018 1:00 pm 写道:
白雪丹枫 @ Tue May 22, 2018 12:53 pm 写道: 我可以帮你焊。只要你告诉我螺丝的规格和长度就行,材料我都有。

当然,现成的带螺丝的wing nut商店里就买得到。我用的都是自己焊的,一是防锈,二是省钱。 :laugh3

谢谢黄兄!home depot几毛钱一个,没有更便宜的了,有大项目再找您。 :shake


没问题! :shake
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14857
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: 万能论坛

楼层:#14  帖子gryphon » 22 5月 2018 13:02

Buy stainless steel ones for marine application.
Electro-plated ones get rusted quickly.

https://www.amazon.ca/Hindley-44303-Stainless-Steel-Bolt/dp/B005IZ3ZOK/ref=lp_9526289011_1_5?s=hi&ie=UTF8&qid=1527008301&sr=1-5
https://www.lowes.ca/bolts/the-hillman-group-14-in-20-x-2-in-stainless-steel-standard-sae-eye-bolt-2-count_g1185973.html

I bought some a few years back at Canadian Tire.
But can no longer find on their website.
gryphon
Senior Captain (大尉)
 
帖子: 55
注册: 24 7月 2015 13:36
Member Number (论坛会员注册序列号): #1231

Re: 万能论坛

楼层:#15  帖子Pungo » 22 5月 2018 13:06

gryphon @ Tue May 22, 2018 1:02 pm 写道: Buy stainless steel ones for marine application.
Electro-plated ones get rusted quickly.

https://www.amazon.ca/Hindley-44303-Stainless-Steel-Bolt/dp/B005IZ3ZOK/ref=lp_9526289011_1_5?s=hi&ie=UTF8&qid=1527008301&sr=1-5
https://www.lowes.ca/bolts/the-hillman-group-14-in-20-x-2-in-stainless-steel-standard-sae-eye-bolt-2-count_g1185973.html

I bought some a few years back at Canadian Tire.
But can no longer find on their website.

不锈钢的更好,谢谢!
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: 万能论坛

楼层:#16  帖子gryphon » 22 5月 2018 13:14

gryphon
Senior Captain (大尉)
 
帖子: 55
注册: 24 7月 2015 13:36
Member Number (论坛会员注册序列号): #1231

Re: 万能论坛

楼层:#17  帖子Pungo » 22 5月 2018 13:17

gryphon @ Tue May 22, 2018 1:14 pm 写道: You may also replace the nut with SS wingnut
https://www.homedepot.ca/en/home/p.10-32-wing-nut-188-stainless-steel.1000181540.html

:up
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: 万能论坛

楼层:#18  帖子Beeknight » 22 5月 2018 13:21

Pungo @ 周二 5月 22, 2018 12:38 pm 写道: 这是我研究安装费师范的最新成果,不用打洞,不要胶带,安装在船尾,平时不装在kayak上,需要时岸边三个螺丝手拧搞定。


:up 能不能分享一下研究成果图? :redfaced
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: 万能论坛

楼层:#19  帖子Pungo » 22 5月 2018 13:22

白雪丹枫 @ Tue May 22, 2018 1:01 pm 写道:
Pungo @ 周二 5月 22, 2018 1:00 pm 写道:
白雪丹枫 @ Tue May 22, 2018 12:53 pm 写道: 我可以帮你焊。只要你告诉我螺丝的规格和长度就行,材料我都有。

当然,现成的带螺丝的wing nut商店里就买得到。我用的都是自己焊的,一是防锈,二是省钱。 :laugh3

谢谢黄兄!home depot几毛钱一个,没有更便宜的了,有大项目再找您。 :shake


没问题! :shake

螺杆螺帽都换成不锈钢了,那我干脆就把那个铁片换成不锈钢的算球,有时间请黄兄帮个忙呗。不急,等我的方案成熟试验成功之后。
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: 万能论坛

楼层:#20  帖子Pungo » 22 5月 2018 13:27

Beeknight @ Tue May 22, 2018 1:21 pm 写道:
Pungo @ 周二 5月 22, 2018 12:38 pm 写道: 这是我研究安装费师范的最新成果,不用打洞,不要胶带,安装在船尾,平时不装在kayak上,需要时岸边三个螺丝手拧搞定。


:up 能不能分享一下研究成果图? :redfaced

上面是图是关键的部分
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: 万能论坛

楼层:#21  帖子Beeknight » 22 5月 2018 13:39

Pungo @ 周二 5月 22, 2018 1:27 pm 写道:
Beeknight @ Tue May 22, 2018 1:21 pm 写道:
Pungo @ 周二 5月 22, 2018 12:38 pm 写道: 这是我研究安装费师范的最新成果,不用打洞,不要胶带,安装在船尾,平时不装在kayak上,需要时岸边三个螺丝手拧搞定。


:up 能不能分享一下研究成果图? :redfaced

上面是图是关键的部分


谢谢! :shake
Beeknight
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3061
注册: 16 8月 2016 20:09
Member Number (论坛会员注册序列号): #1676
地址: Markham

Re: 万能论坛

楼层:#22  帖子白雪丹枫 » 22 5月 2018 14:40

Pungo @ 周二 5月 22, 2018 1:22 pm 写道:
白雪丹枫 @ Tue May 22, 2018 1:01 pm 写道:
Pungo @ 周二 5月 22, 2018 1:00 pm 写道:
谢谢黄兄!home depot几毛钱一个,没有更便宜的了,有大项目再找您。 :shake


没问题! :shake

螺杆螺帽都换成不锈钢了,那我干脆就把那个铁片换成不锈钢的算球,有时间请黄兄帮个忙呗。不急,等我的方案成熟试验成功之后。


没问题。

我的FF都是临时安装在canoe上的,用了几年了啦!换了canoe我又重新设计了一个,每次只要手紧两个螺丝,用的就是司令图上的wing nut焊上螺丝。 :laugh3
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14857
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

Re: 万能论坛

楼层:#23  帖子Alafly » 22 5月 2018 16:11

小板凳等全部安装照片,好期待的!

Pungo @ 周二 5月 22, 2018 1:27 pm 写道:
Beeknight @ Tue May 22, 2018 1:21 pm 写道:
Pungo @ 周二 5月 22, 2018 12:38 pm 写道: 这是我研究安装费师范的最新成果,不用打洞,不要胶带,安装在船尾,平时不装在kayak上,需要时岸边三个螺丝手拧搞定。


:up 能不能分享一下研究成果图? :redfaced

上面是图是关键的部分
Alafly
General (上将)
General (上将)
 
帖子: 10368
注册: 28 10月 2013 17:45
Member Number (论坛会员注册序列号): #152

Re: 万能论坛

楼层:#24  帖子肥彁 » 22 5月 2018 16:26

手拧的螺母拧进螺杆后,再加一个螺母把前一个锁死。
肥彁
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2341
注册: 02 10月 2013 16:56
Member Number (论坛会员注册序列号): #81
地址: Carlton & Manhattan, Markham

Re: 万能论坛

楼层:#25  帖子白雪丹枫 » 22 5月 2018 16:31

肥彁 @ 周二 5月 22, 2018 4:26 pm 写道: 手拧的螺母拧进螺杆后,再加一个螺母把前一个锁死。


不是油马达带的船,没那个必要。手拧足够了。
白雪丹枫
Grand General (大将)
Grand General (大将)
 
帖子: 14857
注册: 30 9月 2013 17:14
Member Number (论坛会员注册序列号): #74
地址: Guelph, Ontario
称呼: 白将军

下一页

回到 It's All About Fishin' 钓鱼!

在线用户