2704 M18那个横把手,尽量别用

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

Re: 2704 M18那个横把手,尽量别用

楼层:#76  帖子Sergeantpepper » 16 2月 2018 19:09

glas456 @ Thu Feb 15, 2018 12:53 pm 写道: 这么绑一下,就不会弄坏那个卡口了 :laugh3



用这个比SM 大法方便多了....靈感剛来自厨房 :laugh3
https://www.ebay.com/itm/4-in-1-Multi-Purpose-Handheld-Jar-Glass-Lid-Bottle-Can-Opener-Kitchen-Twist-Tool/222822117392?epid=11003844422&hash=item33e13bb010:g:cQoAAOSwgv5ZTIKI

Size: Approx. 22.5 x 9.5 x 2.1cm/ 8.86" x 3.7" x 0.8" (L x W x H)
with silicone lining
the biggest ring should fit the a$$ of the drill
handles can easily be extended with proper PVC pipings if need to...
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 2704 M18那个横把手,尽量别用

楼层:#77  帖子xiaolu » 17 2月 2018 07:27

glas456 @ Mon Jan 22, 2018 12:12 pm 写道: 看了前面说的,我也不敢用原配的把手了。我用另一把电钻(有线的)的把手,昨天试了一下,挺好,如果你正好有这样的把手,也可以这么弄。另外,把扭矩调小些,放在10,没觉得力量小。昨天一块5AH 电池打了有30个洞,还剩2 格电呢。

把扭矩调小些,放在 10?

如果我没有搞错的话, MILWAUKEE 的这个钻, 加冰钻在冰上打洞, 应当是选用 DRILLING (钻孔) (而不是选用 DRIVING 或者 HAMMER-DRILLING), 那么在这种情况下(DRILLING MODE), 扭矩数(1 - 24)的选择是没有任何作用的? 摘自我的 MILWAUKEE 2604-20 钻附带的使用说明:

To use the drilling only mode, rotate the application selector collar until the drill symbol appears in line with the arrow.
NOTE: The number selected on the torque selector collar has no effect on operation of the drill in drilling mode.
xiaolu
Site Admin (站长)
 
帖子: 42626
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: 2704 M18那个横把手,尽量别用

楼层:#78  帖子john8848 » 17 2月 2018 12:16

glas456 @ 周四 2月 15, 2018 12:53 pm 写道: 这么绑一下,就不会弄坏那个卡口了 :laugh3

谢谢,jimi提醒,我的转用了三年了,没断,今天一查有咬痕,不处理,某一天一定会断。帮是好主意,额外加了一根柱子增加强度,冰钓完拆掉。
IMG_20180217_110455.jpg
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
john8848
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3762
注册: 30 10月 2013 20:44
Member Number (论坛会员注册序列号): #155
地址: Taunton & Brock, Whitby

Re: 2704 M18那个横把手,尽量别用

楼层:#79  帖子边走边钓 » 17 2月 2018 14:06

用hockey专用胶布多缠几遍,应该比用绳子绑更美观更结实吧。
john8848 @ 周六 2月 17, 2018 11:16 am 写道:
glas456 @ 周四 2月 15, 2018 12:53 pm 写道: 这么绑一下,就不会弄坏那个卡口了 :laugh3

谢谢,jimi提醒,我的转用了三年了,没断,今天一查有咬痕,不处理,某一天一定会断。帮是好主意,额外加了一根柱子增加强度,冰钓完拆掉。
IMG_20180217_110455.jpg
边走边钓
Grand General (大将)
Grand General (大将)
 
帖子: 16832
注册: 17 9月 2013 08:15
Member Number (论坛会员注册序列号): #4
地址: Oakville
称呼: 边部长

Re: 2704 M18那个横把手,尽量别用

楼层:#80  帖子jimi » 17 2月 2018 15:31

john8848 @ 周六 2月 17, 2018 11:16 am 写道:
glas456 @ 周四 2月 15, 2018 12:53 pm 写道: 这么绑一下,就不会弄坏那个卡口了 :laugh3

谢谢,jimi提醒,我的转用了三年了,没断,今天一查有咬痕,不处理,某一天一定会断。帮是好主意,额外加了一根柱子增加强度,冰钓完拆掉。
IMG_20180217_110455.jpg

绑的有水平,练过? :laugh3
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 2704 M18那个横把手,尽量别用

楼层:#81  帖子jimi » 17 2月 2018 15:32

现在流行捆绑 :laugh3
边走边钓 @ 周六 2月 17, 2018 1:06 pm 写道: 用hockey专用胶布多缠几遍,应该比用绳子绑更美观更结实吧。
john8848 @ 周六 2月 17, 2018 11:16 am 写道:
glas456 @ 周四 2月 15, 2018 12:53 pm 写道: 这么绑一下,就不会弄坏那个卡口了 :laugh3

谢谢,jimi提醒,我的转用了三年了,没断,今天一查有咬痕,不处理,某一天一定会断。帮是好主意,额外加了一根柱子增加强度,冰钓完拆掉。
IMG_20180217_110455.jpg
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 2704 M18那个横把手,尽量别用

楼层:#82  帖子边走边钓 » 17 2月 2018 16:56

一看就知道去日本学过。
jimi.cui @ 周六 2月 17, 2018 2:32 pm 写道: 现在流行捆绑 :laugh3
边走边钓 @ 周六 2月 17, 2018 1:06 pm 写道: 用hockey专用胶布多缠几遍,应该比用绳子绑更美观更结实吧。
john8848 @ 周六 2月 17, 2018 11:16 am 写道:
谢谢,jimi提醒,我的转用了三年了,没断,今天一查有咬痕,不处理,某一天一定会断。帮是好主意,额外加了一根柱子增加强度,冰钓完拆掉。
IMG_20180217_110455.jpg
边走边钓
Grand General (大将)
Grand General (大将)
 
帖子: 16832
注册: 17 9月 2013 08:15
Member Number (论坛会员注册序列号): #4
地址: Oakville
称呼: 边部长

Re: 2704 M18那个横把手,尽量别用

楼层:#83  帖子jimi » 17 2月 2018 18:12

???您咋知道是日本学地呢? :laugh3

难道~~~ :laugh3 :laugh3 :laugh3

边走边钓 @ 周六 2月 17, 2018 3:56 pm 写道: 一看就知道去日本学过。
jimi.cui @ 周六 2月 17, 2018 2:32 pm 写道: 现在流行捆绑 :laugh3
边走边钓 @ 周六 2月 17, 2018 1:06 pm 写道: 用hockey专用胶布多缠几遍,应该比用绳子绑更美观更结实吧。
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 2704 M18那个横把手,尽量别用

楼层:#84  帖子Sergeantpepper » 17 2月 2018 19:09

SM 基本结, 有性趣的先要做好这个 :laugh3

phpBB [video]
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 2704 M18那个横把手,尽量别用

楼层:#85  帖子jimi » 17 2月 2018 23:01

Sergeantpepper @ 周六 2月 17, 2018 6:09 pm 写道: SM 基本结, 有性趣的先要做好这个 :laugh3

phpBB [video]

椒S i r,您在这做教学?,有陪练吗?,我关心实习 :laugh3 :laugh3 :laugh3
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 2704 M18那个横把手,尽量别用

楼层:#86  帖子花册累 » 19 2月 2018 09:20

:shake 谢谢

glas456 @ 周四 2月 15, 2018 12:53 pm 写道: 这么绑一下,就不会弄坏那个卡口了 :laugh3
花册累
Colonel (上校)
 
帖子: 131
注册: 19 1月 2014 09:39
Member Number (论坛会员注册序列号): #299

Re: 2704 M18那个横把手,尽量别用

楼层:#87  帖子yangzw2002 » 19 2月 2018 09:34

吹兄现在性趣爱好很广泛啊,多种鸡能发展 :roflmao
yangzw2002
Grand General (大将)
Grand General (大将)
 
帖子: 14350
注册: 28 10月 2013 13:35
Member Number (论坛会员注册序列号): #151
地址: doon south & homerwatson, kitchener

Re: 2704 M18那个横把手,尽量别用

楼层:#88  帖子jimi » 23 2月 2018 10:23

yangzw2002 @ 周一 2月 19, 2018 8:34 am 写道: 吹兄现在性趣爱好很广泛啊,多种鸡能发展 :roflmao

可不是我挑起的哦 :laugh3 :laugh3
我只关注那个把手 :shake :roflmao
jimi
Grand General (大将)
Grand General (大将)
 
帖子: 22028
注册: 26 11月 2013 16:45
Member Number (论坛会员注册序列号): #203
地址: Newmarket
称呼: 吉米

Re: 2704 M18那个横把手,尽量别用

楼层:#89  帖子wetnose » 28 2月 2018 23:38

2704 M18那个横把手,尽量别用? 别的也一样,我已经看到有人把RIDGID 横把手也用坏了! :laugh3
wetnose
Grand General (大将)
Grand General (大将)
 
帖子: 19638
注册: 17 9月 2013 10:44
Member Number (论坛会员注册序列号): #12
地址: 16TH & Woodbine, Markham

Re: 2704 M18那个横把手,尽量别用

楼层:#90  帖子Sergeantpepper » 01 3月 2018 00:06

我看 Makita, Ryobi 的手柄安装設計比較实在

图片

图片

图片

图片

图片

图片
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 2704 M18那个横把手,尽量别用

楼层:#91  帖子肥彁 » 01 3月 2018 01:05

roybi的手柄和钻身连接的地方是金属的还是塑料的?
肥彁
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2341
注册: 02 10月 2013 16:56
Member Number (论坛会员注册序列号): #81
地址: Carlton & Manhattan, Markham

Re: 2704 M18那个横把手,尽量别用

楼层:#92  帖子Sergeantpepper » 01 3月 2018 09:54

图片
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 2704 M18那个横把手,尽量别用

楼层:#93  帖子赣西风 » 01 3月 2018 10:07

看来dewalt bosch的把手比较靠谱 :laugh3
赣西风
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1998
注册: 23 3月 2014 20:13
Member Number (论坛会员注册序列号): #338
称呼: 西风

Re: 2704 M18那个横把手,尽量别用

楼层:#94  帖子Sergeantpepper » 01 3月 2018 10:32

赣西风 @ Thu Mar 01, 2018 9:07 am 写道: 看来dewalt bosch的把手比较靠谱 :laugh3

不求最好只求可用, 因為还有其他决定因素
一般的設計皆容許手柄沿钻蚰旋转, 我取Ryobi 的固定設計.....見朋友用的也没问题
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 2704 M18那个横把手,尽量别用

楼层:#95  帖子sunfish123 » 01 3月 2018 11:11

嗯,这个贴真是年度最佳贴。

如果这个贴早一年出现滴话,哦可能就不买米娃骑了。这样的话,就省下一百大洋用来买电池多好。

说来说去,都市吹大侠滴错。
sunfish123
General (上将)
General (上将)
 
帖子: 7883
注册: 08 12月 2014 21:10
Member Number (论坛会员注册序列号): #896
地址: Dufferin Rutherford

Re: 2704 M18那个横把手,尽量别用

楼层:#96  帖子Sergeantpepper » 01 3月 2018 11:33

sunfish123 @ Thu Mar 01, 2018 10:11 am 写道: 嗯,这个贴真是年度最佳贴。

如果这个贴早一年出现滴话,哦可能就不买米娃骑了。这样的话,就省下一百大洋用来买电池多好。

说来说去,都市吹大侠滴错。


拉仇恨 :roflmao
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 2704 M18那个横把手,尽量别用

楼层:#97  帖子阿恩 » 01 3月 2018 11:42

肥彁 @ 周四 3月 01, 2018 12:05 am 写道: roybi的手柄和钻身连接的地方是金属的还是塑料的?

也是塑料的,但这个钻的torque没那么大,我使用的感觉是已经足够结实了。Ryobi的不足应该是没有大容量的电池。但是,如果你不是机械化部队,一天又能需要多少洞啊?机密大虾一天雪上走10+公里的人能有几个啊?
阿恩
General (上将)
General (上将)
 
帖子: 6684
注册: 18 11月 2013 11:46
Member Number (论坛会员注册序列号): #193
地址: Steeles & Don Mills, North York

Re: 2704 M18那个横把手,尽量别用

楼层:#98  帖子Sergeantpepper » 01 3月 2018 13:34

說扭力...M 的2604 725, 这 我爱脾 750, 同个级数, 立占长搞黑白女丑用2604 打8"洞, 雖然每次打的不多, 但也爽着地用吧 :fishb
打洞多的艮, 用6" 搞花女丑(指的是钻徑噢)那扭力卓卓有余了吧 :shout
最后由 Sergeantpepper 编辑于 03 3月 2018 08:40,总共编辑了 1 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 2704 M18那个横把手,尽量别用

楼层:#99  帖子赣西风 » 01 3月 2018 14:12

Sergeantpepper @ 周四 3月 01, 2018 12:34 pm 写道: 說扭力...M 的2604 725, 这 我爱脾 700, 同个级数, 立占长搞黑白女丑用2604 打8"洞, 雖然每次打的不多, 但也爽着地用吧 :fishb
打洞多的艮, 用6" 搞花女丑(指的是钻徑噢)那扭力卓卓有余了吧 :shout


就听椒sir的,按2604配6"的去找了 :shake
赣西风
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1998
注册: 23 3月 2014 20:13
Member Number (论坛会员注册序列号): #338
称呼: 西风

Re: 2704 M18那个横把手,尽量别用

楼层:#100  帖子xiaolu » 01 3月 2018 14:30

Sergeantpepper @ Thu Mar 01, 2018 12:34 pm 写道: 說扭力...M 的2604 725, 这 我爱脾 700, 同个级数, 立占长搞黑白女丑用2604 打8"洞, 雖然每次打的不多, 但也爽着地用吧 :fishb
打洞多的艮, 用6" 搞花女丑(指的是钻徑噢)那扭力卓卓有余了吧 :shout

嗯, 我的是 2604-20 的"迷娃妻"的电钻, 加 8" 的冰钻.
xiaolu
Site Admin (站长)
 
帖子: 42626
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

上一页下一页

回到 It's All About Fishin' 钓鱼!

在线用户

cron