闲来无事,做个车内棚顶的挂一节竿的架子。

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#26  帖子Sergeantpepper » 18 11月 2017 23:38

Pungo @ Sat Nov 18, 2017 10:34 pm 写道:
Sergeantpepper @ Sat Nov 18, 2017 10:24 pm 写道: "....kayak的前舱隔离板"

why not just pose the yak vertical and fill the tip up with foam-in-place PU to the desired depth ?

You can't fill up all the space. Actually you won't believe how much space you leave until it's filled with water, which is very likely too late.


to cut cost down, fill the space up with empty air-tight plastic bottles (white styro-foam blocks too) as the PU foam is being sprayed on :roflmao ...while PU acts as bonder & sealer, bottles/foam blocks act as fillers
最后由 Sergeantpepper 编辑于 19 11月 2017 10:33,总共编辑了 1 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#27  帖子Sergeantpepper » 18 11月 2017 23:45

eric_gao @ Sat Nov 18, 2017 9:52 pm 写道:
Pungo @ 周六 11月 18, 2017 9:34 pm 写道:
eric_gao @ Sat Nov 18, 2017 9:21 pm 写道:

哦,这样倒也是个方法。 :up

承接来样加工,你可以自己设计。 :roflmao :laugh3

你有线锯机我倒是想做一个kayak的前舱隔离板
phpBB [video]


我是CNC Router,只要你画出SVG文件,我都可以帮你做。


CNC Router you said? that's insane pal ! :roflmao
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#28  帖子Pungo » 18 11月 2017 23:49

Sergeantpepper @ Sat Nov 18, 2017 10:38 pm 写道:
Pungo @ Sat Nov 18, 2017 10:34 pm 写道:
Sergeantpepper @ Sat Nov 18, 2017 10:24 pm 写道: "....kayak的前舱隔离板"

why not just pose the yak vertical and fill the tip up with foam-in-place PU to the desired depth ?

You can't fill up all the space. Actually you won't believe how much space you leave until it's filled with water, which is very likely too late.


to cut cost down, fill the space up with empty air-tight plastic bottles as the PU foam is being sprayed on :roflmao ...while PU acts as bonder & sealer, bottles act as fillers

I think I got you wrong. PU might work. Just need to make sure it's waterproof.
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#29  帖子Pungo » 19 11月 2017 00:05

Pungo @ Sat Nov 18, 2017 10:49 pm 写道:
Sergeantpepper @ Sat Nov 18, 2017 10:38 pm 写道:
Pungo @ Sat Nov 18, 2017 10:34 pm 写道:
You can't fill up all the space. Actually you won't believe how much space you leave until it's filled with water, which is very likely too late.


to cut cost down, fill the space up with empty air-tight plastic bottles as the PU foam is being sprayed on :roflmao ...while PU acts as bonder & sealer, bottles act as fillers

I think I got you wrong. PU might work. Just need to make sure it's waterproof.
It is waterproof. Actually I am going to try it out.
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#30  帖子Sergeantpepper » 19 11月 2017 00:12

:up
yeah, any closed-cell rigid foams are water proof
same spray-on stuff is applied to fill up gaps between window framework and wall opening
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#31  帖子TomABC » 19 11月 2017 00:37

太佩服了! 真的非常厉害!
TomABC
Brigadier General (大校/准将)
Brigadier General (大校/准将)
 
帖子: 492
注册: 11 8月 2016 14:41
Member Number (论坛会员注册序列号): #1670

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#32  帖子Sergeantpepper » 19 11月 2017 10:43

https://sealedair.com/cushioning-solutions/packaging-foam-packing-foam/instapak-foam-packaging/foam-place-systems

If you happen to know someone who uses similar foam-in-place packaging system, he might be happy to give your yak a few shots :laugh3

图片
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#33  帖子波澜不惊 » 19 11月 2017 11:07

网上有不少相关diy视频,貌似不难
波澜不惊
General (上将)
General (上将)
 
帖子: 5449
注册: 25 5月 2014 06:52
Member Number (论坛会员注册序列号): #487

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#34  帖子potato » 19 11月 2017 11:23

复杂,一根绳子就能解决的问题
potato
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2606
注册: 08 10月 2013 21:17
Member Number (论坛会员注册序列号): #124

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#35  帖子eric_gao » 19 11月 2017 11:46

potato @ 周日 11月 19, 2017 10:23 am 写道: 复杂,一根绳子就能解决的问题

你随意就好。
eric_gao
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2298
注册: 04 1月 2014 21:11
Member Number (论坛会员注册序列号): #273

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#36  帖子莫德尔 » 19 11月 2017 18:04

“高手”(姓高的手)在民间啊。。。。。
莫德尔
General (上将)
General (上将)
 
帖子: 6734
注册: 18 9月 2013 17:44
Member Number (论坛会员注册序列号): #42
称呼: 元帅

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#37  帖子铁马冰河西门吹雪 » 19 11月 2017 18:39

精细木工,我梦想
铁马冰河西门吹雪
General (上将)
General (上将)
 
帖子: 10577
注册: 18 9月 2013 00:23
Member Number (论坛会员注册序列号): #33
地址: 密室
称呼: 西门吹雪

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#38  帖子fishtiger » 19 11月 2017 18:58

这个比较牛叉 :up
fishtiger
Major General (少将)
Major General (少将)
 
帖子: 602
注册: 19 9月 2013 10:25
Member Number (论坛会员注册序列号): #45
地址: Erinmills parkwaw & dundas mississauga

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#39  帖子eric_gao » 19 11月 2017 19:38

莫德尔 @ 周日 11月 19, 2017 5:04 pm 写道: “高手”(姓高的手)在民间啊。。。。。


谢元帅。 :shake
eric_gao
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2298
注册: 04 1月 2014 21:11
Member Number (论坛会员注册序列号): #273

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#40  帖子eric_gao » 19 11月 2017 19:39

fishtiger @ 周日 11月 19, 2017 5:58 pm 写道: 这个比较牛叉 :up

抛砖引玉,给有需要的人一些idea。 :shake
eric_gao
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2298
注册: 04 1月 2014 21:11
Member Number (论坛会员注册序列号): #273

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#41  帖子eric_gao » 19 11月 2017 19:44

问题不大 @ 周日 11月 19, 2017 5:39 pm 写道: 精细木工,我梦想

有设备,就能相对任性些。我做的这种是放车内顶棚的。也可以做垂直放鱼竿的,适合船舷边或皮卡后斗。 :shake :up

其实这里产品在美国也有卖,价格也不算低。

https://www.boatoutfitters.com

3-rod-load-n-lock-gunwale-mount-rod-holder_1.jpg


已经得到边部长的青睐,我会帮他做几套,他装在皮卡的后斗的侧面。可以收纳他钓鳟鱼的多节长杆。
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
eric_gao
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2298
注册: 04 1月 2014 21:11
Member Number (论坛会员注册序列号): #273

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#42  帖子Pungo » 19 11月 2017 20:22

eric_gao @ Sun Nov 19, 2017 6:44 pm 写道:
问题不大 @ 周日 11月 19, 2017 5:39 pm 写道: 精细木工,我梦想

有设备,就能相对任性些。我做的这种是放车内顶棚的。也可以做垂直放鱼竿的,适合船舷边或皮卡后斗。 :shake :up

其实这里产品在美国也有卖,价格也不算低。

https://www.boatoutfitters.com

3-rod-load-n-lock-gunwale-mount-rod-holder_1.jpg


已经得到边部长的青睐,我会帮他做几套,他装在皮卡的后斗的侧面。可以收纳他钓鳟鱼的多节长杆。

貌似美国佬根据我的图纸搞的嘛。
Pungo
General (上将)
General (上将)
 
帖子: 10124
注册: 17 9月 2013 10:10
Member Number (论坛会员注册序列号): #10
地址: Richmond Hill
称呼: 司令

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#43  帖子eric_gao » 19 11月 2017 20:25

Pungo @ 周日 11月 19, 2017 7:22 pm 写道:
eric_gao @ Sun Nov 19, 2017 6:44 pm 写道:
问题不大 @ 周日 11月 19, 2017 5:39 pm 写道: 精细木工,我梦想

有设备,就能相对任性些。我做的这种是放车内顶棚的。也可以做垂直放鱼竿的,适合船舷边或皮卡后斗。 :shake :up

其实这里产品在美国也有卖,价格也不算低。

https://www.boatoutfitters.com

3-rod-load-n-lock-gunwale-mount-rod-holder_1.jpg


已经得到边部长的青睐,我会帮他做几套,他装在皮卡的后斗的侧面。可以收纳他钓鳟鱼的多节长杆。

貌似美国佬根据我的图纸搞的嘛。


收专利费去。 :roflmao
eric_gao
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2298
注册: 04 1月 2014 21:11
Member Number (论坛会员注册序列号): #273

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#44  帖子madfrog » 19 11月 2017 22:04

eric_gao @ 周日 11月 19, 2017 6:44 pm 写道:
问题不大 @ 周日 11月 19, 2017 5:39 pm 写道: 精细木工,我梦想

有设备,就能相对任性些。我做的这种是放车内顶棚的。也可以做垂直放鱼竿的,适合船舷边或皮卡后斗。 :shake :up

其实这里产品在美国也有卖,价格也不算低。

https://www.boatoutfitters.com

3-rod-load-n-lock-gunwale-mount-rod-holder_1.jpg


已经得到边部长的青睐,我会帮他做几套,他装在皮卡的后斗的侧面。可以收纳他钓鳟鱼的多节长杆。


看了这网站,这是抢钱啊,吓得我赶紧关上了

你要赔我精神损失费
madfrog
General (上将)
General (上将)
 
帖子: 7880
注册: 02 4月 2014 10:47
Member Number (论坛会员注册序列号): #347
地址: rutherford & weston

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#45  帖子eric_gao » 19 11月 2017 22:41

madfrog @ 周日 11月 19, 2017 9:04 pm 写道:
eric_gao @ 周日 11月 19, 2017 6:44 pm 写道:
问题不大 @ 周日 11月 19, 2017 5:39 pm 写道: 精细木工,我梦想

有设备,就能相对任性些。我做的这种是放车内顶棚的。也可以做垂直放鱼竿的,适合船舷边或皮卡后斗。 :shake :up

其实这里产品在美国也有卖,价格也不算低。

https://www.boatoutfitters.com

3-rod-load-n-lock-gunwale-mount-rod-holder_1.jpg


已经得到边部长的青睐,我会帮他做几套,他装在皮卡的后斗的侧面。可以收纳他钓鳟鱼的多节长杆。


看了这网站,这是抢钱啊,吓得我赶紧关上了

你要赔我精神损失费


那只能说明还是美帝国主义的人民生活水平高。

看样子也只能为你定制两个来安慰一下了。 :shake :roflmao
eric_gao
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2298
注册: 04 1月 2014 21:11
Member Number (论坛会员注册序列号): #273

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#46  帖子xiaolu » 19 11月 2017 22:47

eric_gao @ Sun Nov 19, 2017 9:41 pm 写道:
madfrog @ 周日 11月 19, 2017 9:04 pm 写道:
eric_gao @ 周日 11月 19, 2017 6:44 pm 写道:
有设备,就能相对任性些。我做的这种是放车内顶棚的。也可以做垂直放鱼竿的,适合船舷边或皮卡后斗。 :shake :up

其实这里产品在美国也有卖,价格也不算低。

https://www.boatoutfitters.com

3-rod-load-n-lock-gunwale-mount-rod-holder_1.jpg


已经得到边部长的青睐,我会帮他做几套,他装在皮卡的后斗的侧面。可以收纳他钓鳟鱼的多节长杆。


看了这网站,这是抢钱啊,吓得我赶紧关上了

你要赔我精神损失费


那只能说明还是美帝国主义的人民生活水平高。

看样子也只能为你定制两个来安慰一下了。 :shake :roflmao

嗯, 慰安一下。
xiaolu
Site Admin (站长)
 
帖子: 42626
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#47  帖子millermin » 19 11月 2017 23:35

難度在於如何安裝在自己的車裡,不同的車位置差異極大,是否願意車打孔也是個問題。
millermin
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2340
注册: 14 7月 2014 11:14
Member Number (论坛会员注册序列号): #641
地址: Bronte Creek, Burlington

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#48  帖子Sergeantpepper » 19 11月 2017 23:43

millermin @ Sun Nov 19, 2017 10:35 pm 写道: 難度在於如何安裝在自己的車裡,不同的車位置差異極大,是否願意車打孔也是個問題。


make use of overhead grab handles
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#49  帖子xiaolu » 19 11月 2017 23:50

Sergeantpepper @ Sun Nov 19, 2017 10:43 pm 写道:
millermin @ Sun Nov 19, 2017 10:35 pm 写道: 難度在於如何安裝在自己的車裡,不同的車位置差異極大,是否願意車打孔也是個問題。


make use of overhead grab handles

And rubber/elastic band works, too. :laugh3
xiaolu
Site Admin (站长)
 
帖子: 42626
注册: 17 9月 2013 06:22
Member Number (论坛会员注册序列号): #1
地址: Maple, Vaughan

Re: 闲来无事,做个车内棚顶的挂一节竿的架子。

楼层:#50  帖子millermin » 20 11月 2017 00:19

xiaolu @ 周日 11月 19, 2017 10:50 pm 写道:
Sergeantpepper @ Sun Nov 19, 2017 10:43 pm 写道:
millermin @ Sun Nov 19, 2017 10:35 pm 写道: 難度在於如何安裝在自己的車裡,不同的車位置差異極大,是否願意車打孔也是個問題。


make use of overhead grab handles

And rubber/elastic band works, too. :laugh3

都是好主意,我也试试。想了n久。 试试我手提router能否搞一个。
millermin
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 2340
注册: 14 7月 2014 11:14
Member Number (论坛会员注册序列号): #641
地址: Bronte Creek, Burlington

上一页下一页

回到 It's All About Fishin' 钓鱼!

在线用户

cron