这种样子的轴承怎样保养

相约钓鱼, 探讨钓技, 结交钓友, 分享渔获 。。。

这种样子的轴承怎样保养

楼层:#1  帖子边走边钓 » 02 4月 2016 12:24

不懂啊,看起来很不错的样子。
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
边走边钓
Grand General (大将)
Grand General (大将)
 
帖子: 16832
注册: 17 9月 2013 08:15
Member Number (论坛会员注册序列号): #4
地址: Oakville
称呼: 边部长

Re: 这种样子的轴承怎样保养

楼层:#2  帖子alfishing » 02 4月 2016 12:44

我就是明年春天用grease gun补油。免保养 :shake
alfishing
Colonel (上校)
 
帖子: 154
注册: 29 3月 2014 03:17
Member Number (论坛会员注册序列号): #343

Re: 这种样子的轴承怎样保养

楼层:#3  帖子john8848 » 02 4月 2016 13:02

Bearing Buddy!!
固定好船, 用千斤顶把一短顶起 , 目的检查轴承:

1) 空转听声, 我的轴承一听就有问题, 应该转的很顺.
2) 然后检查轴向, 沿轴方向晃动, 没太大间隙应该可以.
3) 检查内轴承的密封, 轮反内側及轴上有油说明密封损坏, 密封损坏必进水. 进水后轴承会生锈. 那内轴乘的密封一定要双唇的.
john8848
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3762
注册: 30 10月 2013 20:44
Member Number (论坛会员注册序列号): #155
地址: Taunton & Brock, Whitby

Re: 这种样子的轴承怎样保养

楼层:#4  帖子Sergeantpepper » 02 4月 2016 13:21

Bearing Buddy http://www.bearingbuddy.com/how.html
....like said, dont over fill the piston or you'll blow the bearing seal giving rise to leakages (John, "修車族"先前在另貼說啲30%大概是這意思)

phpBB [video]
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 这种样子的轴承怎样保养

楼层:#5  帖子alfishing » 02 4月 2016 13:52

:up :up
john8848 写道: Bearing Buddy!!
固定好船, 用千斤顶把一短顶起 , 目的检查轴承:

1) 空转听声, 我的轴承一听就有问题, 应该转的很顺.
2) 然后检查轴向, 沿轴方向晃动, 没太大间隙应该可以.
3) 检查内轴承的密封, 轮反内側及轴上有油说明密封损坏, 密封损坏必进水. 进水后轴承会生锈. 那内轴乘的密封一定要双唇的.

:up :up :up
alfishing
Colonel (上校)
 
帖子: 154
注册: 29 3月 2014 03:17
Member Number (论坛会员注册序列号): #343

Re: 这种样子的轴承怎样保养

楼层:#6  帖子Yinyangfish » 02 4月 2016 18:30

alfishing 写道: 我就是明年春天用grease gun补油。免保养 :shake

入冬前做好些。如有水流出那就要注意啦! :+1
Yinyangfish
Major General (少将)
Major General (少将)
 
帖子: 1043
注册: 06 11月 2013 14:59
Member Number (论坛会员注册序列号): #166
地址: HWY 401 & HWY 404, Scarborough

Re: 这种样子的轴承怎样保养

楼层:#7  帖子Yinyangfish » 02 4月 2016 18:35

保养要定期做,检查有两种,一种要拆,一种不要。加油不.能代替换油。
Yinyangfish
Major General (少将)
Major General (少将)
 
帖子: 1043
注册: 06 11月 2013 14:59
Member Number (论坛会员注册序列号): #166
地址: HWY 401 & HWY 404, Scarborough

Re: 这种样子的轴承怎样保养

楼层:#8  帖子边走边钓 » 02 4月 2016 19:15

按照要求全部检查啦,好像没有问题,不需要补油吧?
john8848 写道: Bearing Buddy!!
固定好船, 用千斤顶把一短顶起 , 目的检查轴承:

1) 空转听声, 我的轴承一听就有问题, 应该转的很顺.
2) 然后检查轴向, 沿轴方向晃动, 没太大间隙应该可以.
3) 检查内轴承的密封, 轮反内側及轴上有油说明密封损坏, 密封损坏必进水. 进水后轴承会生锈. 那内轴乘的密封一定要双唇的.
边走边钓
Grand General (大将)
Grand General (大将)
 
帖子: 16832
注册: 17 9月 2013 08:15
Member Number (论坛会员注册序列号): #4
地址: Oakville
称呼: 边部长

Re: 这种样子的轴承怎样保养

楼层:#9  帖子边走边钓 » 02 4月 2016 19:16

不知道应该补那种油啊,看起来很干净整洁,所以又把套子装回去了。 :shake
alfishing 写道: 我就是明年春天用grease gun补油。免保养 :shake
边走边钓
Grand General (大将)
Grand General (大将)
 
帖子: 16832
注册: 17 9月 2013 08:15
Member Number (论坛会员注册序列号): #4
地址: Oakville
称呼: 边部长

Re: 这种样子的轴承怎样保养

楼层:#10  帖子早上好菜包 » 02 4月 2016 19:17

螺帽装反了吧
早上好菜包
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1215
注册: 31 12月 2013 14:24
Member Number (论坛会员注册序列号): #268

Re: 这种样子的轴承怎样保养

楼层:#11  帖子边走边钓 » 02 4月 2016 19:21

多谢椒Sir,总算搞明白了 :shake
Sergeantpepper 写道: Bearing Buddy http://www.bearingbuddy.com/how.html
....like said, dont over fill the piston or you'll blow the bearing seal giving rise to leakages (John, "修車族"先前在另貼說啲30%大概是這意思)

phpBB [video]
边走边钓
Grand General (大将)
Grand General (大将)
 
帖子: 16832
注册: 17 9月 2013 08:15
Member Number (论坛会员注册序列号): #4
地址: Oakville
称呼: 边部长

Re: 这种样子的轴承怎样保养

楼层:#12  帖子sunfish123 » 02 4月 2016 19:28

有神探在,没有搞不定的事。


边走边钓 写道: 多谢椒Sir,总算搞明白了 :shake
Sergeantpepper 写道: Bearing Buddy http://www.bearingbuddy.com/how.html
....like said, dont over fill the piston or you'll blow the bearing seal giving rise to leakages (John, "修車族"先前在另貼說啲30%大概是這意思)

phpBB [video]
sunfish123
General (上将)
General (上将)
 
帖子: 7883
注册: 08 12月 2014 21:10
Member Number (论坛会员注册序列号): #896
地址: Dufferin Rutherford

Re: 这种样子的轴承怎样保养

楼层:#13  帖子边走边钓 » 02 4月 2016 19:34

:shake :shake 多谢
Yinyangfish 写道: 保养要定期做,检查有两种,一种要拆,一种不要。加油不.能代替换油。
边走边钓
Grand General (大将)
Grand General (大将)
 
帖子: 16832
注册: 17 9月 2013 08:15
Member Number (论坛会员注册序列号): #4
地址: Oakville
称呼: 边部长

Re: 这种样子的轴承怎样保养

楼层:#14  帖子边走边钓 » 02 4月 2016 19:36

不要吓我,我啥没有拆
早上好菜包 写道: 螺帽装反了吧
边走边钓
Grand General (大将)
Grand General (大将)
 
帖子: 16832
注册: 17 9月 2013 08:15
Member Number (论坛会员注册序列号): #4
地址: Oakville
称呼: 边部长

Re: 这种样子的轴承怎样保养

楼层:#15  帖子john8848 » 02 4月 2016 19:41

边走边钓 写道: 按照要求全部检查啦,好像没有问题,不需要补油吧?
john8848 写道: Bearing Buddy!!
固定好船, 用千斤顶把一短顶起 , 目的检查轴承:

1) 空转听声, 我的轴承一听就有问题, 应该转的很顺.
2) 然后检查轴向, 沿轴方向晃动, 没太大间隙应该可以.
3) 检查内轴承的密封, 轮反内側及轴上有油说明密封损坏, 密封损坏必进水. 进水后轴承会生锈. 那内轴乘的密封一定要双唇的.

应该补油, 因为一次加不满, 总有AIR POCKET, 用用加加, 直到不缩会, 教SIR上的录像中提到有ROCK就好了. 问问你的第了加那个黄油.
john8848
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3762
注册: 30 10月 2013 20:44
Member Number (论坛会员注册序列号): #155
地址: Taunton & Brock, Whitby

Re: 这种样子的轴承怎样保养

楼层:#16  帖子john8848 » 02 4月 2016 19:53

对: "dont over fill the piston or you'll blow the bearing seal giving rise to leakages",
新设计的BEAR BUDDY, 仔细看边上有1/16"的孔, 加多了黄油或热涨, 油会流出来, 卸压.老的BEAR BUDDY据说, 没有哪个孔, 会BLOW
john8848
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3762
注册: 30 10月 2013 20:44
Member Number (论坛会员注册序列号): #155
地址: Taunton & Brock, Whitby

Re: 这种样子的轴承怎样保养

楼层:#17  帖子早上好菜包 » 02 4月 2016 19:54

边走边钓 写道: 不要吓我,我啥没有拆
早上好菜包 写道: 螺帽装反了吧

一般轮胎螺帽一边是平的一边是锥形,锥形对着轮胎。
早上好菜包
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1215
注册: 31 12月 2013 14:24
Member Number (论坛会员注册序列号): #268

Re: 这种样子的轴承怎样保养

楼层:#18  帖子john8848 » 02 4月 2016 19:56

好像轮胎螺帽反了!!!
最后由 john8848 编辑于 02 4月 2016 20:03,总共编辑了 1 次
john8848
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3762
注册: 30 10月 2013 20:44
Member Number (论坛会员注册序列号): #155
地址: Taunton & Brock, Whitby

Re: 这种样子的轴承怎样保养

楼层:#19  帖子Sergeantpepper » 02 4月 2016 19:58

最后由 Sergeantpepper 编辑于 02 4月 2016 20:04,总共编辑了 1 次
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

Re: 这种样子的轴承怎样保养

楼层:#20  帖子john8848 » 02 4月 2016 20:00

早上好菜包 写道:
边走边钓 写道: 不要吓我,我啥没有拆
早上好菜包 写道: 螺帽装反了吧

一般轮胎螺帽一边是平的一边是锥形,锥形对着轮胎。

是啊!!! 好像轮胎螺帽反了!!! 观察仔细!!! :yes :yes :yes
john8848
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 3762
注册: 30 10月 2013 20:44
Member Number (论坛会员注册序列号): #155
地址: Taunton & Brock, Whitby

Re: 这种样子的轴承怎样保养

楼层:#21  帖子早上好菜包 » 02 4月 2016 20:09

应该是看不到间隙,应该已经移位,阿迪哥螺丝松动估计是这货造成的。
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
早上好菜包
Lieutenant General (中将)
Lieutenant General (中将)
 
帖子: 1215
注册: 31 12月 2013 14:24
Member Number (论坛会员注册序列号): #268

Re: 这种样子的轴承怎样保养

楼层:#22  帖子叼鱼郎 » 02 4月 2016 20:12

螺母看来是装反了,平面冲外, 锥形导向应该向内。这样才能从理论上来说保证轮胎于轴同心。
但是你要是说只要轮子不掉下来就行, 愿意咋地就JB 咋地, 那也没问题。 :up
叼鱼郎
Senior Captain (大尉)
 
帖子: 59
注册: 13 10月 2014 11:51
Member Number (论坛会员注册序列号): #842

Re: 这种样子的轴承怎样保养

楼层:#23  帖子yangzw2002 » 02 4月 2016 20:28

又学了不少知识,这trailer的轮胎学问也不少 :up :up
yangzw2002
Grand General (大将)
Grand General (大将)
 
帖子: 14350
注册: 28 10月 2013 13:35
Member Number (论坛会员注册序列号): #151
地址: doon south & homerwatson, kitchener

Re: 这种样子的轴承怎样保养

楼层:#24  帖子Yinyangfish » 02 4月 2016 20:29

阿迪,如果是自已装反了,下次请专业人士做吧。如果是拿回來就这样那你应去找 dealer. 这可是低级错误啊! :cry :feed
Yinyangfish
Major General (少将)
Major General (少将)
 
帖子: 1043
注册: 06 11月 2013 14:59
Member Number (论坛会员注册序列号): #166
地址: HWY 401 & HWY 404, Scarborough

Re: 这种样子的轴承怎样保养

楼层:#25  帖子Sergeantpepper » 02 4月 2016 20:32

Types of lug (wheel nut ).........I luv this forum, ppl all pitch in to help @ other :shake
您没有权限查看这个主题的附件(帖图)。 请先注册并登陆后访问。 谢谢! You have no permission to view this attachment. Please register and sign in. Thank you!
Sergeantpepper
Grand General (大将)
Grand General (大将)
 
帖子: 13182
注册: 17 9月 2013 08:31
Member Number (论坛会员注册序列号): #6

下一页

回到 It's All About Fishin' 钓鱼!

在线用户